Lincoln Electric Mobiflex 400-MS Manual de usuario

ENGINE DRIVEN WELDERS

Publication E13 13 2/07

Web Update 5/08

www lincolnelectric com

Mobiflex™400-MS

Mobile Welding Fume Extractor

ENVIRONMENTAL SYSTEMS

Advantage Lincoln

• Generous 735 CF airflow with LFA 3.1/4.1 extraction arm(1).

• Filter efficiency up to 99.8%(2).

• Generous 30 m2(325 ft2) filter cartridge with ExtraCoat®pretreatment.

• Electronic differential pressure system monitors internal static pres-

sure and controls filter cleaning.

• Indicator light for saturated filter.

• RotaPulse®automatic filter cleaning system.

• Internal aluminum mesh spark arrestor.

• Low noise operation: 69dBA.

• One-year warranty on unit; 30 days on filter, hoses and hose

adaptors.

Mobiflex™400-MS S stem includes:

• Filter, plastic housing, 8" flexible hose, 6 meter (19 ft.) 115VAC input

power cord and instruction manual.

NOTE: Extraction Ar of your choice is required.

(1)CFM level is dependent upon ar length, fan type and syste aintenance.

(2)Per Din EN 60335-2-69 Standards.

Lincoln Electric’s®Mo iflex™400-MS is a porta le, low vacuum/high volume self-cleaning filtration

system designed for heavy duty extraction and filtration of welding fumes.

The lightweight and rugged design of the Mo iflex™400-MS along with the standard front caster and

rear wheels allows for easy porta ility. It is ideal for facilities that require welding fume extraction in

multiple locations, including maintenance departments, general fabrication and job shops, and industrial

welding environments. Because of the self-cleaning function, the obiflex™400- S can also be used in

production environments where welding duty cycles are longer and more frequent.

The Mo iflex™400-MS can e configured with Lincoln’s LFA 3.1 or LFA 4.1

fume extraction arms or with the 152 mm (6") diameter, 5 m (16’) long flexi le

hose and hood set. Lincoln Electric’s®fume extraction arms are designed to

provide welders optimal motion and reach for their specific welding position(s)

and work area. The arm lengths range from 3.1 m (10 ft.) to 4.1 m

(13 ft.). For hard to reach areas such as confined spaces, the flexible hose

and set can be easily carried to locations where an extraction arm just is not

feasible.

The internal extraction fan is designed specifically for weld applications.

It extracts weld fume through the arm, into the internal spark arrestor and

finally through the self-cleaning filter cartridge capturing the welding fume

particulate. As the particulate is collected on the outside of the filter cartridge

and builds up, the filter is then automatically cleaned causing the particulate

to fall into the collection bin for easy, hands free disposal.

The Mo iflex™400-MS filter is recommended for consuma le use of approximately

6,000 lbs. (2722 kg) of IG wire or 4,000 lbs. (1814 kg) of stick or flux-cored wire before replacing.

Filter performance will be affected by process and application variables including:

base metal(s), consumables(s), and coatings (oil) if applicable.

Processes

Stick, TIG, IG, Flux-Cored

Shown:

Mobiflex™400-MS with

optional Extraction Arm

Input

PHASE

TECHNICAL SPECIFICATIONS

Dimensions

Product Product Filter Type/ Input Input H x W x D Net Weight

Name Num er Filter Size Power Current mm (in.) kg (l s.)

obiflex™400- S K1741-1 Pretreated Cellulose 115/1/60 12A 1020 x 810 x1200 130

Base Unit 30 m2(325 ft2) (40 x 32 x 48) (286)

Mobiflex™400-MS

www lincolnelectric com

[2]

A CLOSER LOOK

PERFORMANCE

Extraction Arms

No matter if you are working in a small work station, under a low

ceiling, or in a large fabrication area, one of Lincoln Electric’s®vari-

ous fume extraction arms for welding will work for you. The flexible

extraction arms are built the Lincoln®way—rugged and reliable.

Low vacuum extraction arms are designed for high volume/low

velocity air movement to enable the arm to be positioned at a

distance of 6-12 inches (152-304 mm) from the welding source.

Designed with the welder in mind, the arms provide welders optimal

motion and reach for their specific welding position(s) and work

area.

The arms come equipped with the 360° rotatable hood for optimal

positioning to welding source. This allows a larger work envelope

with less repositioning of the arm and increased operator visibility.

With the extraction arm correctly positioned, the welding fume par-

ticulate can be effectively drawn away from the operator’s breathing

zone, as well as eliminate the residual fume particulate that often

rises and hovers within the facility.

With a unique spring-balanced internal mechanism, Lincoln’s®fume

extraction arms provide a long-lasting, user-friendly solution. The

extraction arms external shell is made of solid, lightweight 203 mm

(8 in.) diameter dent and scratch resistant tubing. Incorporated into

the arm is an airflow throttle valve and extraction focus spoiler. A

clear halogen lamp and automatic start/stop are available as rec-

ommended optional features. With the use of an arc sensor, the

system automatically starts and stops the fan unit, providing hands-

free operation and helping to conserve energy. All this combined

provides a highly effective system with maximum efficiency and

minimal disruption to welder productivity.

Rotatable Hood

Self-Cleaning Filter

Mobiflex™400-MS Reach

Self-Cleaning Filter

The Mobiflex 400-MS filter has a surface area of 30 m2(325 ft2) with

ExtraCoat®pretreatment and the unique 3D-pleated structure

results in a high filter efficiency, a longer life, and low operational

costs. The ExtraCoat®pretreatment fills the micro pleats in the filter

and reduces moisture. This increases its efficiency from the start of

usage.

An electronic pressure differential system measures the static air

pressure as it enters and exits the filter cartridge. If the air pressure

entering the filter unit is greater than the air pressure exiting the fil-

ter unit, the electronic circuit signals the cleaning system to clean

the filter cartridge. The cleaning of the filter, segment by segment,

with compressed air results in maximum airflow.

Compressed air from the internal tank releases through multiple air-

jets to clean one section of the filter at each air burst. A complete

cleaning cycle can be activated by depressing a manual switch on

the front of the control panel. The particulate is blown off the filter

cartridge into a plastic collection bin. If cleaning the filter cartridge

is no longer effective, the electronic circuit will indicate a full filter

cartridge by blinking the light on the front control panel.

0 m

(0 ft.)

1 m

(3 ft.)

2 m

(6.5 m)

3 m

(10 ft.)

4 m

(13 ft.)

0 m

(0 ft.)

1 m

(3 ft.)

2 m

(6.5 ft.)

3 m

(10 ft.)

4 m

(13 ft.)

5 m

(16 ft.)

400-MS

LFA 4.1

LFA 3.1

Mobiflex™400-MS

www lincolnelectric com

[3]

Consult our local Lincoln Representative to help ou decide which options are right for ou!

RECOMMENDED OPTIONS

GENERAL OPTIONS

LFA 3.1 (10 ft.) and LFA .1

(13 ft.) Extraction Arm

Extraction arms with 360° rotat-

able hood, airflow throttle valve,

extraction focus spoiler, and han-

dle for every positioning. Hood

lamp and automatic start/stop

models available.

Order:

K2633-1 LFA 3.1

K2633-2

K2633-3 LFA .1

K2633-

Hose and Hood Set

Completely flexible extraction

hose with magnetic hood set.

Ideal for those hard to access

fume extraction applications.

Comes with 152 mm (6") diameter

hose and reinforced outside steel

rings to protect against wear and

crushing.

Order K1668-1

Lamp Kit with Arc Sensor

To conserve energy and extend

the life of your system, order the

lamp kit with arc sensor. It senses

an arc while the lamp illuminates

the work area. The arc sensor

turns on the unit when it senses

an arc flash and automatically

turns off 20 seconds after the arc

goes out. Also includes a manual

override on/off switch that works

independently of the arc sensor.

Kit includes work lamp with arc

sensor housing, switch bank,

and wiring.

Order K1706-2

Starter Overload Switch

for 230V

This overload switch retrofits the

extraction unit for 230V operation.

Order K1 9 -3

LongLife®00-MS Filter

Standard replacement LongLife®

filter with ExtraCoat®treatment

that provides a 99.8% filter

efficiency.

Order K1673-2

LFA .1 with lamp/arc sensor

LFA 3.1 with lamp/arc sensor

Mobilflex™00-MS Base Unit K17 1-1

Choose an Extraction Arm or Hose

LFA 3.1 – 10 ft. Extraction Arm K2633-1

LFA 3.1 – 10 ft. Extraction Arm with Lamp/Arc Sensor K2633-2

LFA 4.1 – 13 ft. Extraction Arm K2633-3

LFA 4.1 – 13 ft. Extraction Arm with Lamp/Arc Sensor K2633-4

Hose and Hood Set, 5 meter (16 ft.) K1668-1

Options

Lamp Kit with Arc Sensor K1706-2

Starter verload Switch for 230V K1494-3

Filter Options

LongLife®400-MS Filter K1673-2

TOTAL:

PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE

MOBIFLEX™400-MS ORDER FORM

PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE

THE LINCOLN ELECTRIC COMPANY®

22801 St. Clair Ave., Cleveland, H 44117-1199 • 216.481.8100 • www.lincolnelectric.com

En ironmental Systems Family

High & Low

Vacuum Solutions

CUSTOMER ASSISTANCE POLICY

The business of The Lincoln Electric Company®is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. ur challenge is to meet the needs of

our customers and to exceed their expectations. n occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. ur employees respond to

inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. ur employees, however, are not

in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume

any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or

implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is

specifically disclaimed.

Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the

customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.

Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.

Otros manuales para Mobiflex 400-MS

Otros manuales de Sistema de soldadura de Lincoln Electric

Lincoln Electric

Lincoln Electric COOL ARC 24 Manual de usuario

Lincoln Electric

Lincoln Electric LF 56D Manual de usuario

Lincoln Electric

Lincoln Electric Idealarc 250 Manual de usuario

Lincoln Electric

Lincoln Electric ACTIVE8 Manual de usuario

Lincoln Electric

Lincoln Electric OUTBACK 145 Manual de usuario

Lincoln Electric

Lincoln Electric POWERTEC 305C PRO Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC 275TP Manual de usuario

Lincoln Electric

Lincoln Electric Airgas RED-D-ARC DX500e Manual de usuario

Lincoln Electric

Lincoln Electric RED-D-ARC E500 Manual de usuario

Lincoln Electric

Lincoln Electric IDEALARC DC-400 Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC V205-T AC/DC TIG Manual de usuario

Lincoln Electric

Lincoln Electric AC-225C Manual de usuario

Lincoln Electric

Lincoln Electric PRO-CUT IM665 Manual de usuario

Lincoln Electric

Lincoln Electric POWER WAVE IM986 Manual de usuario

Lincoln Electric

Lincoln Electric FlexCool 35 Manual de usuario

Lincoln Electric

Lincoln Electric IDEALARC DC-400 Manual de usuario

Lincoln Electric

Lincoln Electric IM481-B Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC V300-PRO SVM105-B Manual de usuario

Lincoln Electric

Lincoln Electric X-TRACTOR 1G IM281-B Manual de usuario

Lincoln Electric

Lincoln Electric BIG RED 500 Manual de usuario

Lincoln Electric

Lincoln Electric RED-D-ARC LN-25TM PRO EXTREME IM10078 Manual de usuario

Lincoln Electric

Lincoln Electric SYNERGIC 7 AND 7H IM557 Manual de usuario

Lincoln Electric

Lincoln Electric POWERTEC 205C Series Manual de usuario

Lincoln Electric

Lincoln Electric PRO-CUT 25 Manual de usuario

Manuales populares de Sistema de soldadura de otras marcas

Berner

Berner PLASMACUT 54 Manual de usuario

Pro Spot

Pro Spot PR-155 Manual de usuario

Forney

Forney 210 Manual de usuario

Thermal Arc

Thermal Arc 400S Manual de usuario

GYS

GYS PROTIG 201 AC/DC Manual de usuario

TAFA

TAFA 30*8B35 Manual de usuario

ESAB

ESAB Buddy Arc 145 Manual de usuario

CIGWELD

CIGWELD 636804 Guía rápida

Red-D-Arc

Red-D-Arc DC-400 Manual de usuario

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manual de usuario

Elettro

Elettro HI-MIG 3000 SYNERGIC Manual de usuario

WIA

WIA Weldmatic 270 CP132-2 Manual de usuario

Sonics

Sonics H520T Manual de usuario

Miller

Miller Big Blue 400D Manual de usuario

NewArc

NewArc RT2000 Guía de inicio rápido

Hypertherm

Hypertherm powermax1000 Manual de usuario

Everlast

Everlast POWER MTS 221STi Manual de usuario

Kipor

Kipor KDE180XW Manual de usuario