Lincoln Electric Magnum 450WC Manual de usuario

MAGNUM®450WC

K684

The Magnum 450WC is a water

cooled gun and cable assembly

designed for both gas-shielded solid

(GMAW) and gas-shielded, flux-cored

(FCAW-GS) continuous feed arc

welding wires.

To function properly, the 450WC must

be connected to a water cooler. Water

flows through the gun cables and han-

dle to the end of the gun tube, cooling

the gas diffuser and nozzle.

In addition to keeping the contact tip

cool, the outgoing end of the gun tube

is specially designed for maximum

heat transfer between the cooling

water and the gas nozzle. The gas

nozzle will not overheat, even when

operating the gun at 100% duty cycle.

This results in cool operation in appli-

cations such as spray transfer, pulse

welding and when using argon

blended gas.

The gun has two ratings when

cooled at a minimum water flow

rate of .58 gallons (2.2 liters) per

minute.

With straight CO2gas:

450 amps, 100% duty cycle.

With argon/CO2blended gas:

400 amps, 100% duty cycle.

The wire diameter range is

.035 - 5/64” (0.9 - 2.0mm):

Solid Wire:

.035 - 1/16” (0.9 - 1.6mm)

Flux-cored Wire:

.045 - 5/64” (1.2 - 2.0mm)

Choose from 10 ft. or 15ft. (3 or 4.5m)

cable lengths.

The gun tube angle is 60 degrees.

Cable liners for aluminum wire feeding

are available. See Expendable

Replacement Parts table on page 3.

The 450WC gun can be connected to

a wire feeder with a Lincoln Fast-Mate™

adapter or a European-style gun

adapter. The following connector kits

allow connection of the 450WC gun

to wire feeders without Fast-Mate

receptacles:

The Magnum 450WC Water-Cooled Gun and

Cable Assembly

Product No. Cable Length Wire Size Contact Tip Gas Diffuser Gas Nozzle Cable Liner

ft. (mm.) In. (mm.)

K684-X 10 (3.5) .035 (.9) S22334-035 S22030-1 M18210-4 M16083-1

.045 (1.2) S22334-045

K684-X 15 (4.5) .035 (.9) S22334-035 S22030-1 M18210-4 M16083-1

.045 (1.2) S22334-045

K684-X 10 (3.5) .052 (1.3) S22334-052 S22030-1 M18210-4 M16083-2

1/16 (1.6) S22334-116

K684-4 15 (4.5) .052 (1.3) S22334-052 S22030-1 M18210-4 M16083-2

1/16 (1.6) S22334-116

K684-5 10 (3.5) 1/16 (1.6) S22334-116 S22030-1 M18210-4 M16083-3

5/64 (2.0) S22334-564

K684-6 15 (4.5) 1/16 (1.6) S22334-116 S22030-1 M18210-4 M16083-3

5/64 (1.6) S22334-564

Connector Feeder

Kit Type

K489-1 Lincoln LN-7 Series, LN-8

or LN-9

K489-2* Lincoln LN-25 or DH-10

K489-3 Miller wire feeders

K489-4 Tweco adapted wire

feeders

K489-5 Hobart Series 2000 wire

feeders

K489-6 ESAB wire feeders

K489-7 Lincoln 10-Series feeders,

LN-10, DH-10, PF-10,

STT-10.

* To install a K489-2 Adapter Kit on a 10-Series wire feeder, a K1500-1

wire feeder connector is also required.

ORDERING INFORMATION

Customer Assistance Policy

The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs

of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our

customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect

to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information

or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does

the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.

Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of

the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.

Description Part No. Size Inches Size mm.

CABLE LINER for 15' (4.5m) M16083-1 .035-.045 .9-1.2

and less (Steel wire) M16083-2 .052-1/16 1.3-1.6

M16083-3 1/16-5/64 1.6-2.0

CABLE LINER for 15' (4.5m) M18732-2 (black) .030-.035 .8-.9

and less (Aluminum wire) M18732-4 (red) 1/16 1.6

M18732-6 (blue) .035-3/64 .9-.2

CABLE LINER for 10' (3.0m) M18732-1 (black) .030-.035 .8-.9

and less (Aluminum wire) M18732-3 (red) 1/16 1.6

M18732--5 (blue) .035-3/64 .9-1.2

CONTACT TIPS(1) S22334-035 .035 .9

S22334-035A .035A .9A

S22334-040 .040 1.0

S22334-040A .040A 1.0A

S22334-045 .045 1.2

S22334-364A 3/64A 1.2A

S22334-052 .052 1.3

S22334-116 1/16 1.6

S22334-116A 1/16A 1/16A

S22334-564 5/64 2.0

GAS DIFFUSER S22030-1

NOZZLE INSULATOR S22031-1

GAS NOZZLE (flush) M18210-1 .39 ID 10 ID

(flush) M18210-2 .51 ID 13 ID

(flush) M18210-3 .59 ID 15 ID

.12" (3mm) recess M18210-4 .59 ID 15 ID

.12" (3mm) recess M18210-5 .76 ID 19.2 ID

Spot M18210-6 .76 ID 19.2 ID

GUN TUBE ASSEMBLY REPLACEABLE PARTS:

GUN TUBE INSULATION S22333-7A

NOZZLE HOLDER(2) S22333-7B

FIXING NUT S22333-7C

CERAMIC INSULATOR(2) S22333-7D

INSULATION CONE S22333-7F

JOINT COMPOUND T12837

EXPENDABLE REPLACEMENT PARTS

(1) Add suffix “D” for 10-pack, “M” for 20-pack.

(2) Joint compound is required for assembly of these parts.

THE

LINCOLN ELECTRIC

COMPANY

Local Sales and Service through Global

Subsidiaries and Distributors

Cleveland, Ohio 44117-1199 U.S.A.

TEL (216) 481-8100

FAX (216) 486-1751

WEBSITE www.lincolnelectric.com

Magnum

E12.70 3/00

USA

ALABAMA

BIRMINGHAM 35124-1156

(205) 988-8232

MOBILE 36693-4310

(334) 666-6524

ALASKA

Contact SEATTLE

District Office

(206) 575-2456

ARIZONA

PHOENIX 85260-1768

(602) 348-2004

ARKANSAS

LITTLE ROCK 72116-7034

(501) 771-4842

CALIFORNIA

FRESNO 93722-3949

(209) 276-0110

LOS ANGELES 90670-2936

(562) 906-7700

SACRAMENTO 95677-4729

(916) 630-1885

SAN DIEGO 92108-3911

(619) 208-9001

SAN FRANCISCO 94550-9657

(925) 443-9353

COLORADO

DENVER 80112-5115

(303) 792-2418

CONNECTICUT

NORTH HAVEN 06238

(860) 742-8887

WASHINGTON DC

HERNDON, VA 20170-5227

(703) 904-7735

FLORIDA

JACKSONVILLE 32259-4396

(904) 287-9595

MIAMI 33014-6719

(305) 556-0142

ORLANDO 32714-1974

(407) 788-8557

TAMPA 33619-4480

(770) 475-0955

GEORGIA

ATLANTA 30076-4914

(770) 475-0955

SAVANNAH 31401-5140

(912) 231-9604

LATIN AMERICA

Miami, Florida U.S.A.

Phone: (305) 556-0142

EUROPE

The Netherlands

Phone: 31 24 3522 911

RUSSIA, AFRICA & MIDDLE EAST

Cleveland, Ohio U.S.A.

Phone: (216) 481-8100

ASIA PACIFIC

Singapore

Phone: 65 276 0878

HAWAII

See SEATTLE

District Office

(206) 575-2456

ILLINOIS

CHICAGO 60521-5629

(630) 920-1500

PEORIA 61607-2046

(309) 697-8240

INDIANA

FT. WAYNE 46825-5547

(219) 484-4422

SOUTH BEND 46530-0577

(219) 277-8619

INDIANAPOLIS 46038-9459

(317) 845-8445

IOWA

CEDAR RAPIDS 52402-3160

(319) 362-6804

DAVENPORT 52806-1344

(319) 386-6522

DES MOINES 50265-6218

(515) 224-4121

KANSAS

KANSAS CITY 66214-1625

(913) 894-0888

WICHITA 67037

(316) 788-7352

KENTUCKY

LOUISVILLE 40203-2906

(502) 636-5125

LOUISIANA

BATON ROUGE 70809-2256

(504) 922-5151

SHREVEPORT 71108-2521

(318) 869-3531

MARYLAND

BALTIMORE 21050

(443) 831-0416

MASSACHUSETTS

BOSTON 02154-8414

(781) 899-2010

MICHIGAN

DETROIT 48034-4005

(248) 353-9680

FLUSHING 48433-1855

(810) 487-1310

GRAND RAPIDS 49512-3924

(616) 942-8780

MINNESOTA

MINNEAPOLIS 55447-5435

(612) 551-1990

MISSISSIPPI

JACKSON 39212-9635

(601) 372-7679

MISSOURI

KANSAS CITY (KS) 66214-1625

(913) 894-0888

ST. LOUIS 63146-3572

(314) 993-5465

MONTANA

Contact SEATTLE

District Office

(206) 575-2456

NEBRASKA

OMAHA 68046-2826

(402) 339-1809

NEW JERSEY

EDISON 08837-3939

(732) 225-2000

NEW MEXICO

ALBUQUERQUE 87111-2158

(505) 237-2433

NEW YORK

ALBANY 12065-1139

(518) 877-8278

BUFFALO 14225-5515

(716) 681-5554

NEW YORK CITY

(888) 269-6755

EAST SYRACUSE 13057-1040

(315) 432-0281

NORTH CAROLINA

CHARLOTTE 28273-6200

(704) 588-3251

RALEIGH 27604-8456

(919) 231-5855

OHIO

CINCINNATI 45242-3706

(513) 554-4440

CLEVELAND 44143-1433

(216) 289-4160

COLUMBUS 43221-4073

(614) 488-7913

DAYTON 45439-1254

(937) 299-9506

TOLEDO 43528-9483

(419) 867-7284

OKLAHOMA

OKLAHOMA CITY 73119-2416

(405) 686-1170

TULSA 74146-1622

(918) 622-9353

OREGON

PORTLAND 97230-1030

(503) 252-8835

PENNSYLVANIA

BETHLEHEM 18020-2062

(610) 866-8788

ERIE 16506-2979

(814) 835-3531

JOHNSTOWN 15905-2506

(814) 535-5895

PHILADELPHIA 19008-4310

(610) 543-9462

PITTSBURGH 15275-1002

(412) 787-7733

YORK 17404-1144

(717) 764-6565

SOUTH CAROLINA

GREENVILLE 29681-4724

(864) 967-4157

COLUMBIA 29209

(803) 783-2851

SOUTH DAKOTA

SIOUX FALLS 57108-2609

(605) 339-6522

TENNESSEE

KNOXVILLE 37923-4506

(423) 693-5513

MEMPHIS 38115-5946

(901) 363-1075

NASHVILLE 37210-3816

(615) 316-9777

TRI-CITIES 37604-3338

(423) 928-6047

TEXAS

DALLAS 76051-7602

(817) 329-9353

HOUSTON 77060-3143

(281) 847-9444

SAN ANTONIO 78133-3502

(830) 964-2421

UTAH

MIDVALE 84047-3759

(801) 233-9353

VIRGINIA

HERNDON 20170-5227

Washington, D.C.

(703) 904-7735

ROANOKE 24153-1447

(800) 916-0778

WILLIAMSBURG 23602-7048

(757) 870-5508

WASHINGTON

SEATTLE 98188-7615

(206) 575-2456

SPOKANE 99005-9637

(509) 468-2770

WEST VIRGINIA

CHARLESTON 25526-9796

(304) 757-9862

WISCONSIN

GREEN BAY 54302-1829

(920) 435-1012

MILWAUKEE 53186-0403

(262) 650-9364

CANADA

ALBERTA

CALGARY T2H 2M3

(403) 253-9600

EDMONTON T6H 2K1

(403) 436-7385

WINNIPEG R3N 0C7

(204) 488-6398

BRITISH COLUMBIA

VANCOUVER V3B 7A2

(604) 844-5209

MARITIMES

NOVA SCOTIA B2X 3N2

(902) 434-2725

MANITOBA

WINNIPEG R3N 0C7

(204) 488-6398

ONTARIO

TORONTO M4G 2B9

(416) 421-2600

QUEBEC

MONTREAL J5Y 2G3

(514) 654-3121

LINCOLN INTERNATIONAL HEADQUARTERS

HARRIS CALORIFIC DIVISION

2345 Murphy Blvd., Gainesville, Georgia 30504 U.S.A.

Phone: 1-800-241-0804 • Fax: (770) 535-0544 • Web Site: www.harriscal.com

DISTRIBUTED BY:

Tabla de contenidos

Otros manuales de Sistema de soldadura de Lincoln Electric

Lincoln Electric

Lincoln Electric 11298 Manual de usuario

Lincoln Electric

Lincoln Electric POWER-ARC 4000 Manual de usuario

Lincoln Electric

Lincoln Electric P223 FLUX Manual de usuario

Lincoln Electric

Lincoln Electric VANTAGE 600 SD Manual de usuario

Lincoln Electric

Lincoln Electric POWERTEC 205C Series Manual de usuario

Lincoln Electric

Lincoln Electric D1.8 Manual de usuario

Lincoln Electric

Lincoln Electric IDEALARC DC-655 Manual de usuario

Lincoln Electric

Lincoln Electric RANGER 250 LPG IM931 Manual de usuario

Lincoln Electric

Lincoln Electric RANGER 8 SVM107-B Manual de usuario

Lincoln Electric

Lincoln Electric UltraCore 81K2A75-H Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC 175TP Manual de usuario

Lincoln Electric

Lincoln Electric CV405-I Manual de usuario

Lincoln Electric

Lincoln Electric POWERTEC 200C Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC POWER WAVE 450 IM524-D Manual de usuario

Lincoln Electric

Lincoln Electric RED-D-ARC FX450 Manual de usuario

Lincoln Electric

Lincoln Electric POWER MIG 180 Manual de usuario

Lincoln Electric

Lincoln Electric SPEEDTEC 215C AUS Manual de usuario

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manual de usuario

Lincoln Electric

Lincoln Electric 12719 Manual de usuario

Lincoln Electric

Lincoln Electric Invertec V275-S Manual de usuario

Lincoln Electric

Lincoln Electric NA-3 Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC IM732-B Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC 275S Manual de usuario

Lincoln Electric

Lincoln Electric US-CW139 Manual de usuario

Manuales populares de Sistema de soldadura de otras marcas

Berner

Berner PLASMACUT 54 Manual de usuario

Pro Spot

Pro Spot PR-155 Manual de usuario

Forney

Forney 210 Manual de usuario

Thermal Arc

Thermal Arc 400S Manual de usuario

GYS

GYS PROTIG 201 AC/DC Manual de usuario

TAFA

TAFA 30*8B35 Manual de usuario

ESAB

ESAB Buddy Arc 145 Manual de usuario

CIGWELD

CIGWELD 636804 Guía rápida

Red-D-Arc

Red-D-Arc DC-400 Manual de usuario

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manual de usuario

Elettro

Elettro HI-MIG 3000 SYNERGIC Manual de usuario

WIA

WIA Weldmatic 270 CP132-2 Manual de usuario

Sonics

Sonics H520T Manual de usuario

Miller

Miller Big Blue 400D Manual de usuario

NewArc

NewArc RT2000 Guía de inicio rápido

Hypertherm

Hypertherm powermax1000 Manual de usuario

Everlast

Everlast POWER MTS 221STi Manual de usuario

Kipor

Kipor KDE180XW Manual de usuario