Lightspeed Flexcat Manual de usuario

User Manual

Flexible Audio for Group Learning

1POWER 2

TABLE OF CONTENTS

SECTION 1: 4 Important safety instructions

Overview 5 System components and unpacking

6 Optional components

7 Redcat Access controls, connections & indicators

9 Flexmike controls and connections

10 Flexcat pod controls and connections

11 Remote control functions and indicators

SECTION 2: 12 1. Determine set-up locations

Initial Set-up 13 2. Plug in the charging station and Redcat

14 3. Charge Flexcat components

15 4. Power on all components

15 5. Ensure all components are ready

16 6. Set up the Flexmike + earbud

17 7. Determine placement of the speaker pods

18 8. Setting system volume levels

SECTION 3: 19 Daily operation instructions

Daily Operation 19 Remove and place the pods

19 Remove the microphone and put it on

19 Remove the remote and begin instruction

20 Using the remote

20 Pod call button

20 Return all components to charging station

SECTION 4: 21 Tips and Tricks

Addtional

Operation

Information

22 Using optional pods #5-6

23 Multimedia audio integration

25 Wall-mounting Redcat Access speaker

SECTION 5: 26 Component registration overview

Maintenance and

Troubleshooting

26 Battery replacement

29 Troubleshooting

SECTION 6: 32 Warranty statement

Warranty, Safety

and Speciﬁcations

33 Safety warnings and certiﬁcations

37 System speciﬁcations

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use the apparatus near

water.

6. Clean only with dry cloth.

7. Do not block any ventilation

openings. Install in accordance

with the manufacturer’s

instructions.

8. Do not install near any heat

sources such as radiators,

heat registers, stoves, or other

apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose

of the polarized or grounding-

type plug. A polarized plug

has two blades with one wider

than the other. A grounding-

type plug has two blades and

a third grounding prong. The

wide blade or the third prong is

provided for your safety. If the

provided plug does not fit into

your outlet, consult an electrician

for replacement of the obsolete

outlet.

10. Protect the power cord from

being walked on or pinched

particularly at plugs, convenience

receptacles, and the point where

they exit from the apparatus.

11. Only use attachments/

accessories specified by the

manufacturer.

13. Unplug this apparatus during

lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus

has been damaged in any way,

such as power-supply cord or

plug is damaged, liquid has been

spilled or objects have fallen into

the apparatus, the apparatus

has been exposed to rain or

moisture, does not operate

normally, or has been dropped.

15. When the mains plug or

appliance coupler is used as the

disconnect device, it shall remain

readily operable.

16. Please keep the unit in a good

ventilation environment.

17. WARNING: To reduce the risk

of ﬁre or electric shock, do not

expose this apparatus to rain or

moisture.

18. Apparatus shall not be exposed

to dripping or splashing and no

objects ﬁlled with liquids, such

as vases, shall be placed on the

apparatus.

12. Use only with a cart,

stand, tripod, bracket or

table specified by the

manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination

to avoid injury from tip-over.

1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional

Information

5. Maintenance &

Troubleshooting

6. Safety &

Speciﬁcations

SECTION 1:

OVERVIEW

SYSTEM COMPONENTS AND UNPACKING

The standard conﬁguration of the Flexcat will contain:

Flexmike + earbud lanyard

& teacher remote

Charging station with

power supply

Small group speaker

Pods (4-6)

POWER

VolVol

Mute

UP DN

1POWER 2

Redcat Access whole class

speaker with power supply

PLEASE NOTE: Redcat, speaker pods, Flexmike(s) and remote(s) are registered

together at the factory and are labeled as such. Please keep all components

together as a system. Moving them from one system, or room, to another will

result in the need to re-register them to function.

1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional

Information

5. Maintenance &

Troubleshooting

6. Safety &

Speciﬁcations

Standard Components

RCA Redcat Access whole room speaker w/ power supply

FCCS Flexcat charging station with power supply

FCP Flexcat speaker pod with rechargeable battery pack

FCTT Flexcat team-teaching kit (Flexmike, earbud lanyard

& remote control)

FM-EBL Flexmike pendant microphone with earbud lanyard

and battery pack

FCHRC Flexcat handheld remote control with rechargeable

battery pack

EBL Flexmike earbud lanyard

NH6V 6V NiMH rechargeable battery pack for speaker pods

NH2.4V 2.4V NiMH rechargeable battery pack for Flexmike

and remote

16V-2.0-NA 16V/2.0A power supply and AC cable for RCA and

FCCS

Optional Accessories

16VCC DC charging cable for optional speaker pods #5-6

MSC3535 3.5mm-3.5mm stereo audio cable

USB-MCB USB Type A-Micro B charging cable for Flexmike

OPTIONAL COMPONENTS

Equipment which may be part of your Flexcat:

Additional

speaker pods

Team teaching kit:

2nd Flexmike + earbud

lanyard and remote

VolVol

Mute

UP DN

1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional

Information

5. Maintenance &

Troubleshooting

6. Safety &

Speciﬁcations

REDCAT SPEAKER CONTROLS,

CONNECTIONS AND INDICATORS

3. MICROPHONE VOLUME: Controls the volume level of teacher

microphone(s) and student sharing from pods.

4. TONE CONTROL: Adjusts the audio tone, adding more bass or treble

for a more rich or crisp sound.

MICROPHONE

VOLUME

MINMAX BASSTREBLE

TONE

(TOP VIEW)

1POWER 2

1. POWER ON INDICATOR: The power light will glow blue

when power is applied.

2. MIC 1 & MIC 2: Mic link and registration indicators

a. Flashing amber indicates registration is in process.

b. Solid green indicates a link has been established.

(FRONT VIEW)

1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional

Information

5. Maintenance &

Troubleshooting

6. Safety &

Speciﬁcations

REDCAT SPEAKER CONTROLS,

CONNECTIONS AND INDICATORS CON’T

5. REGISTRATION: Press this button if

there is a new microphone, pod, or

remote to be registered.

6. AUDIO INPUT JACK & VOLUME

CONTROL: 3.5mm stereo connector

for connecting multimedia sources

to the Redcat Access. Controls the

volume level of the audio input from

the connected audio source.

7. AUDIO OUTPUT JACK & VOLUME

CONTROL: 3.5mm stereo connector

for connecting to an assisted listening

device (ALD) or to a computer for

recording. Controls the volume level

of the audio output.

8. POWER BUTTON: This button is used

to turn the Redcat Access on or off.

The blue front panel will glow when

power is on.

9. POWER INPUT JACK: Plug the power

supply (16VDC/2.0A) into this jack.

AUDIO IN

MIN

MAX

AUDIO

(ALD) OUT

MIN

MAX

ON/OFF

DC INPUT

16V/2.0A

(SIDE VIEW)

10. CARRYING INSET: Cutaway grip for moving or carrying

the Redcat.

11. CABLE MANAGEMENT AND STRAIN RELIEF

12. WALL MOUNTING SLOTS

13. SECURITY BRACKET SLOT

Testing Purposes Only

(REAR VIEW)

1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional

Information

5. Maintenance &

Troubleshooting

6. Safety &

Speciﬁcations

FLEXMIKE CONTROLS AND CONNECTIONS

1. POWER/MUTE SWITCH: press and hold to power on, press to mute, press

and hold to power off.

2. MIC 1 STATUS: lighted to indicate microphone is registered as MIC 1.

• Blue: solid = normal operation; ﬂashing = linking in process.

• Red: solid = muted; ﬂashing = muted while linking in process.

3. MIC 2 STATUS: lighted to indicate microphone is registered as MIC 2 (same

behavior as MIC 1 status light above).

4. EARBUD CONNECTION: connect the earbud for monitoring.

5. CHARGING/LOW BATTERY INDICATOR: lights red when charging, green

when fully charged. When in operation, turns red to indicate low battery.

6. MICROPHONE VOLUME UP/DOWN

7. AUDIO INPUT: connect audio source to send to whole class.

8. LANYARD INTERFACE: insert the lanyard into this hook to wear the

Flexmike.

9. BATTERY DOOR: remove the battery door to replace the rechargeable

battery pack.

10. REGISTRATION: (inside battery compartment - not shown) only used when

adding or replacing Flexmike.

1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional

Information

5. Maintenance &

Troubleshooting

6. Safety &

Speciﬁcations

FLEXCAT POD CONTROLS AND

CONNECTIONS

1. CHARGING INDICATOR: this

light turns red when charging,

green to indicate charging

complete.

2. POWER/LOW BATTERY

INDICATOR: this light blinks

blue when powered on, turns

solid blue when ready for

operation and turns red when

the battery is low.

3. POD NUMBER STICKER: this

sticker acts as a clear visual

indicator for the teacher to

determine which speaker

represents which group number.

4. LOUDSPEAKER: the internal

loudspeaker distributes the

teacher’s voice.

5. MICROPHONE: the internal

microphone that picks up the

student’s voice.

6. CALL BUTTON: students can

press this button to notify the

teacher they need assistance.

7. AUDIO OUT: this jack and

volume adjustment connects

audio from the pod to an

assistive listening or recording

device.

8. DC CHARGING/POWER

INPUT: to charge optional pods

#5 and 6, plug the charging

cable from the base station into

this jack.

CALL AUDIO OUT VOL

CHARGE

16V/0.3A

– +

67 8

Otros manuales para flexcat

Tabla de contenidos

Otros manuales de Sistema estéreo de Lightspeed

Lightspeed

Lightspeed Mobile PA Manual de usuario

Lightspeed

Lightspeed Redcat media Manual de usuario

Lightspeed

Lightspeed Cat 885 Manual de usuario

Lightspeed

Lightspeed Access Link Manual de usuario

Lightspeed

Lightspeed CAT 860 Manual de usuario

Lightspeed

Lightspeed CAT AV Manual de usuario

Lightspeed

Lightspeed 820iR Manual de usuario

Lightspeed

Lightspeed Redcat media Manual de usuario

Lightspeed

Lightspeed TOPCAT Manual de usuario

Lightspeed

Lightspeed Redcat media Manual de usuario

Lightspeed

Lightspeed Redcat media Manual de usuario

Lightspeed

Lightspeed Redcat media Manual de usuario

Lightspeed

Lightspeed TOPCAT Manual de usuario

Lightspeed

Lightspeed Redcat media Manual de usuario

Lightspeed

Lightspeed TOPCAT Manual de usuario

Lightspeed

Lightspeed 955Access Manual de usuario

Lightspeed

Lightspeed Lightspeed Manual de usuario

Lightspeed

Lightspeed 955 Access Manual de usuario

Lightspeed

Lightspeed Activate System Manual de usuario

Lightspeed

Lightspeed TOPCAT Manual de usuario

Lightspeed

Lightspeed 820iR Manual de usuario

Lightspeed

Lightspeed 800IX Manual de usuario

Lightspeed

Lightspeed Redcat media Manual de usuario

Lightspeed

Lightspeed Redcat Access LSRCA 1881 Manual de usuario

Manuales populares de Sistema estéreo de otras marcas

LG CM3330B Manual de usuario

Sony

Sony SS-CEP50 Manual de usuario

Cetacea Sound

Cetacea Sound CVS-II Manual de usuario

Aiwa

Aiwa XR-H66MD Manual de usuario

Denon

Denon UCD-250 Manual de usuario

Sanyo

Sanyo DC-MX41i Manual de usuario

Sharp

Sharp CD-ES600V Manual de usuario

Exibel

Exibel BDX600-UK Manual de usuario

Sanyo

Sanyo DC-F320 Manual de usuario

Philips

Philips FWM583X Manual de usuario

Sharp

Sharp CD-C462 Manual de usuario

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manual de usuario

Aiwa

Aiwa XR-EM70 Manual de usuario

Cyrus

Cyrus Lyric Manual de usuario

Philips

Philips MCM159/98 Manual de usuario

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manual de usuario

RCA

RCA RS3965SB Manual de usuario

Sharp

Sharp XL-UH240 Manual de usuario

Lightspeed flexcat Manual de usuario

Manuales populares de Sistema estéreo de otras marcas