Lightmybricks 75954 Manual de usuario

The following page is the instructions for the Light My Bricks LEGO Hogwarts

Great Hall (75954) LED light kit.

If you run into any issues, please refer to the online troubleshooting guide.

To ensure a trouble-free installation of your light kit, please read and follow

each step carefully. These instructions can be downloaded in PDF format here

Please note: This page lists instructions for the LED light kit only. If you are

wishing to purchase the Light My Bricks LEGO Hogwarts Great Hall (75954) LED

Light My Bricks: LEGO Hogwarts Great Hall

75954 Lighting Kit

light kit , please click here to view the product page

Package Contents:

8x White 30cm Bit Lights

4x White 15cm Micro Bit Lights

3x Green Strip Lights

1x White Strip Light

1x Flicker Effects Boards

1x Micro 4-Port Expansion Board

2x 6-Port Expansion Boards

2x 5cm Connecting Cables

3x 15cm Connecting Cables

2x 30cm Connecting Cables

1x AA Battery Pack (Requires 3x AA Batteries)

6x Adhesive Squares

LEGO Pieces:

6x Black Plate 1×6

4x Black Tile 1×1 with Clip

4x Black 1×1 Modiﬁed Plate Rounded with Handle

1x Black Round Plate 1×1 with open stud

1x Black Plate 1×2 modiﬁed with stud jumper

3x Trans Clear Plate w Rounded Bottom 2×2

Important things to note:

Laying cables in between and underneath bricks

Cables can ﬁt in between and underneath LEGO® bricks, plates, and tiles

providing they are laid correctly between the LEGO® studs. Do NOT forcefully

join LEGO® together around cables; instead ensure they are laying comfortably

in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the

cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards.

Connectors can be inserted only one way. With the expansion board facing up,

look for the soldered “=” symbol on the left side of the port. The connector side

with the wires exposed should be facing toward the soldered “=” symbol as you

insert into the port. If a plug won’t ﬁt easily into a port connector, do not force it.

Incorrectly inserting the connector can can result in bent pins inside the port

or possible overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure

the side of the connector with the wires exposed is facing down. If a plug won’t

ﬁt easily into a port connector, don’t force it. Doing so will damage the plug and

the connector.

Installing Bit Lights under LEGO® bricks

and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the

correct way up (Yellow LED component exposed). You can either place them

directly on top of LEGO® studs or in between.

OK, Let’s Begin!

1.) We will begin with installing spot lights to the exterior of the Great Hall. First,

take out the following provided LEGO pieces to make up an angled spot light.

2x Black Plate 1×6

1x Black Tile 1×1 with Clip

1x Black 1×1 Modiﬁed Plate Rounded with Handle

Take a Green Strip Light and using it’s adhesive backing, stick it onto the base

of the black 1×6 plate for the spot light

2.) Repeat the previous step to build another 3 spot lights using provided

pieces and Green Strip Lights as per below:

4x Black Plate 1×6

2x Black Tile 1×1 with Clip

2x Black 1×1 Modiﬁed Plate Rounded with Handle

2x Green Strip Lights

3.) Take a 15cm Connecting Cable and connect it between two of the spot

lights, then take a 30cm Connecting Cable and connect one end to the right

strip light as shown below:

Connect the two spot lights to the front of the great hall in the below positions,

then tuck the 15cm connecting cable underneath the base of the hall.

4.) Take the other end of the 30cm Connecting Cable and connect it to the

third spot light (green strip light’s left port), then bring it around to the right

side of the hall. Disconnect and discard the following grey angled tile and

connect the spot light to this position.

Hide the 30cm cable in between the spot lights underneath the base of the hall

as shown below.

5.) Take the AA Battery Pack and insert 3x AA Batteries to it. Connect the

battery pack cable to the left port on the spot light on the left of the Hall. Turn

ON the battery pack to test the spot lights are working OK.

6.) Take a new 15cm Connecting Cable and connect it to the third green Strip

Light. Connect the other end of the cable to a 6-Port Expansion Board.

Tabla de contenidos

Otros manuales de Equipo de iluminación de Lightmybricks

Lightmybricks

Lightmybricks LEGO Assembly Square 10255 Manual de usuario

Lightmybricks

Lightmybricks LEGO PAC-MAN ARCADE 10323 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks LEGO UCS OBI-WAN's JEDI STARFIGHTER 10215 LIGHT... Manual de usuario

Lightmybricks

Lightmybricks LEGO 1989 Batwing Manual de usuario

Lightmybricks

Lightmybricks LEGO ALPINE LODGE Manual de usuario

Lightmybricks

Lightmybricks LEGO STAR WARS AT-AT 75288 Manual de usuario

Lightmybricks

Lightmybricks LEGO THE BATMAN-BATMOBILE 42127 Manual de usuario

Lightmybricks

Lightmybricks 75325 Manual de usuario

Lightmybricks

Lightmybricks LEGO MARVEL SPIDER-MAN CARNAGE Manual de usuario

Lightmybricks

Lightmybricks 76956 Manual de usuario

Lightmybricks

Lightmybricks LEGO Porsche 911 RSR 42096 Lighting Kit Manual de usuario

Lightmybricks

Lightmybricks 103375 Manual de usuario

Lightmybricks

Lightmybricks LEGO MEDIEVAL CASTLE Manual de usuario

Lightmybricks

Lightmybricks LEGO STAR WARS BD-1 75335 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks LEGO CLASSIC TV Series Manual de usuario

Lightmybricks

Lightmybricks LEGO FISH TANK Manual de usuario

Lightmybricks

Lightmybricks 42125 Manual de usuario

Lightmybricks

Lightmybricks LEGO Brick Bank 10251 Light Kit Manual de usuario

Lightmybricks

Lightmybricks LEGO STAR WARS UCS LUKE SKYWALKER'S... Manual de usuario

Lightmybricks

Lightmybricks LEGO 75277 Manual de usuario

Lightmybricks

Lightmybricks LEGO THE LORD OF THE RINGS: RIVENDELL 10316 LIGHT... Manual de usuario

Lightmybricks

Lightmybricks HARRY POTTER EXPECTO PATRONUM 76414 LIGHT... Manual de usuario

Lightmybricks

Lightmybricks LEGO GINGERBREAD HOUSE 10267 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks 10309 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario