Lightmybricks 103024 Manual de usuario

Light My Bricks : Ghostbusters Firehouse Headquarters LED

Lighting Kit

Here is the instructions document for the Lego Ghostbusters Firehouse Headquarters

LED lighting kit. Please read and follow the steps carefully to ensure this lighting kit is

installed properly.

Package contents:

 6x White Strip Lights

 13x White 30 cm Bit Lights

 3x Flashing Red 30cm Bit Lights

 1x Flashing White 30cm Bit Light

 1x 12-port Expansion Board

 2x 6-port Expansion Boards

 1x 4-port Traffic Light Effects Board

 1x Battery Pack (3x AA batteries not included)

 10x Adhesive squares

Connecting Cables

 4x 15cm cable

 5x 30cm cable

Extra Lego Pieces

 6x plate 1×6 (for mounting strip lights)

 2x trans red 1×1 round plate

 1x trans green 1×1 round plate

 1x trans orange 1×1 round plate

 2x trans red 1×1 round brick

 2x light grey 1×1 modified brick with stud on one side

 2x light grey “tap”

Important things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they

are laid correctly between the LEGO® studs. Do NOT forcefully join LEGO® together

around cables; instead ensure they are laying comfortably in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable

and light.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights. Connectors can be

inserted only one way. With the Strip Light facing up, ensure the side of the connector

with the wires exposed is facing down. If a plug won’t fit easily into a port connector, don’t

force it. Doing so will damage the plug and the connector.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can

be inserted only one way. With the expansion board facing up, look for the soldered “=”

symbol on the left side of the port. The connector side with the wires exposed should be

facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily

into a port connector, do not force it.

WARNING: Incorrectly inserting the connector can result in bent pins inside the port or

possible overheating of the expansion board when connected.

Installing Bit Lights under LEGO® bricks and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way

up (Yellow LED component exposed). You can either place them directly on top of

LEGO® studs or in between.

OK, Let’s Begin!

Instructions for installing this kit

1.) This lighting kit is installed from the bottom up. Start by opening the building and

removing the 2nd and top levels of the modular building.

We will be installing lights to the traffic light first. Remove the traffic light and pole, then

disassemble the traffic light starting from the left yellow plate.

Otros manuales de Equipo de iluminación de Lightmybricks

Lightmybricks

Lightmybricks LEGO THE LORD OF THE RINGS: RIVENDELL 10316 LIGHT... Manual de usuario

Lightmybricks

Lightmybricks Technic DIY Designer Kit Manual de usuario

Lightmybricks

Lightmybricks Fire Brigade Manual de usuario

Lightmybricks

Lightmybricks LEGO MARVEL SPIDER-MAN CARNAGE Manual de usuario

Lightmybricks

Lightmybricks LEGO CHRISTMAS TREE 2-IN-1 40573 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks 75336 Manual de usuario

Lightmybricks

Lightmybricks LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING... Manual de usuario

Lightmybricks

Lightmybricks LEGO WALT DISNEY TRIBUTE CAMERA LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks LEGO AT-TE WALKER 75337 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks LEGO STAR WARS VENATOR-CLASS REPUBLIC ATTACK... Manual de usuario

Lightmybricks

Lightmybricks 10265 Manual de usuario

Lightmybricks

Lightmybricks 75326 Manual de usuario

Lightmybricks

Lightmybricks 75330 Manual de usuario

Lightmybricks

Lightmybricks LEGO Fiat 500 10271 LED light kit Manual de usuario

Lightmybricks

Lightmybricks FKP 37 Manual de usuario

Lightmybricks

Lightmybricks LEGO Harley-Davidson Fatboy 10269 Lighting... Manual de usuario

Lightmybricks

Lightmybricks LEGO OPTIMUS PRIME Manual de usuario

Lightmybricks

Lightmybricks LEGO HOGWARTS EXPRESS COLLECTORS EDITION Manual de usuario

Lightmybricks

Lightmybricks Downtown Diner Lighting Kit Manual de usuario

Lightmybricks

Lightmybricks LEGO 75274 Manual de usuario

Lightmybricks

Lightmybricks 10317 Manual de usuario

Lightmybricks

Lightmybricks 75349 Manual de usuario

Lightmybricks

Lightmybricks 40426 Manual de usuario

Lightmybricks

Lightmybricks LEGO BOOKSHOP Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario