LightFry EcoFry LF1306166-1 Manual de usuario
Installation Manual
EcoFry Installation Manual –Rev 1 July 2022
1
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE MACHINE COVERS
NO USER-SERVICEABLE PARTS INSIDE
REPAIR AND INSTALLATIONS SHOULD BE DONE BY
AUTHORIZED SERVICE PERSONNEL ONLY
This installation manual covers the following models:
Model Name
Description
Power Requirements
LF1306166-1
EcoFry –For UL Ventless
Operation of the Lightfry Oven
120v, 60Hz, 12A, Single Phase
This document is under revision control and it may be subjected to modifications.
Please contact LightFry USA for the latest version.
WARNING
EcoFry Installation Manual –Rev 1 July 2022
2
1
Table of Contents
1
Table of Contents ...........................................................................................................................2
2
Explanations of the Icons ..............................................................................................................3
3
Safety Information........................................................................................................................... 4
4
EcoFry - General Information
....................................................................................................... 6
5
Recommended Installation Clearances ........................................................................................7
6
EcoFry and Lightfry Assembly - Outer Dimensions ................................................................... 8
7
EcoFry –Connections to Lightfry Oven.......................................................................................... 9
7.1
Mechanical Connections ...........................................................................................................9
7.2
Power Connections ................................................................................................................. 10
7.3
Machine Interlock .................................................................................................................... 10
7.4
EcoFry Exhaust Chimney........................................................................................................ 10
8
Operation of the EcoFry............................................................................................................... 11
9
Spare Parts.................................................................................................................................... 12
10
Troubleshooting ............................................................................................................................ 12
EcoFry Installation Manual –Rev 1 July 2022
3
2
Explanations of the Icons
Danger!
Warning!
Attention!
Immediate dangerous situation
that can cause severe injury or
death.
Possibility of dangerous situation
can cause severe injury or death.
Possible dangerous situations
that can cause minor injury or
damage.
Hot Surfaces
High
Voltage
Be aware of hot surfaces and
risk of burning
Danger of electrical shock or
danger of life. High power
components
Information
Attention or information, please be
aware of the information provided
EcoFry Installation Manual –Rev 1 July 2022
4
3
Safety Information
Please, for your own safety, carefully read this
manual before operating the EcoFry unit.
Appliance shall not be cleaned with water jets.
If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similar qualified person to avoid a hazardous
situation.
Staff using the oven must be thoroughly briefed and
trained before using the Ecofry unit. Make sure that
you keep this manual in a place where everyone can
easily find it.
Incorrect installation, maintenance, servicing, or
cleaning of the EcoFry may result in damage, or
injury.
The oven should be serviced by an authorized
service partner at least once a year to ensure that the
oven remains in perfect working order.
Do not install closer than 2”/ 50mm from the rear
side.
CAUTION
EcoFry Installation Manual –Rev 1 July 2022
5
Liability
This accessory operates internally with hot air temperatures around 315 ºC [ 600 ºF], therefore there is a
risk of burning yourself if not properly operated. Please read this manual before operating the oven,
avoiding this step could cause you serious damages.
The machine is operated at high current; therefore, the machine should be inspected, maintenance or
repaired only by trained technicians. Always disconnect the unit from main power before removing the
machine side panels.
Performing the any of the following steps will invalidate the manufacturer’s warranty and product
liability.
✓
Installations and repairs that are not carried out by authorized specialist.
✓
Performing any technical changes to the unit that are not approved by the manufacturer.
Hot Surfaces
High Current
EcoFry Installation Manual –Rev 1 July 2022
6
4
EcoFry - General Information
The EcoFry system is an accessory to the LightFry oven that permits the oven to be operated in
compliance with UL’s specification for ventless cooking. The UL certification allows the oven to be
operated with no external vent hood over it, or a hood that is sized solely for heat extraction. A hood that is
equipped for greasy vapors is not required.
The EcoFry is a catalytic system that converts the greasy vapors coming from cooking food into carbon
dioxide and water vapor. It has an integral heater element to provide the energy for the conversion reaction
that maintains the catalyst at the proper temperature independently of the oven’s set cooking temperature.
EcoFry - Specifications
Metric Imperial
Width 696 mm 27.4 inch
Height 160 mm 6.3 inch
Depth 292 mm 11.5 inch
Weight
17.2 kg 38
pounds
Operating Temp
427 oC 800 oF
The EcoFry unit is delivered in a carton box. Please read the Installation/Operation manual before
attempting to install the unit on the oven or operate it during cooking.
EcoFry Installation Manual –Rev 1 July 2022
7
5
Recommended Installation Clearances
Be sure to comply with the clearances recommended in the Lightfry installation manual for areas not
covered in this manual.
Keep a minimum clearance of 12 inches [305 mm] on the left side from any heat source. If possible do not
place any heat sources on the left side of the oven.
Keep a minimum clearance of 2 inches [50 mm] for both the back and right side of the unit.
IMPORTANT! The back side clearance should never be less than 2 inches [50 mm]. Narrower clearances
will restrict natural airflow around the unit and could compromise the electrical cabinet components.
It is recommended to increase the left/right clearance for an easy serviceability when possible. Please note
that should the EcoFry require service it will require a minimum clearance of 12 inches to open the control
panel access door.
Do not install or place any object on top of the unit.
Do not connect a ventilation system directly to the exhaust pipe, allow a minimum distance of 4 inches [100
mm] between the ventilation system and the unit.
IMPORTANT! Be aware of the hot air and steam vapors leaving the exhaust pipe during the cooking
process.
EcoFry Installation Manual –Rev 1 July 2022
8
6
EcoFry and Lightfry Assembly - Outer Dimensions
Units: Inches
EcoFry Installation Manual –Rev 1 July 2022
9
7
EcoFry –Connections to Lightfry Oven
The following steps will guide you through the installation of the EcoFry onto your LightFry oven.
7.1
Mechanical Connections
Before setting the unit on top of the Lightfry oven place the gasketing material around the oven’s exhaust
chimney as seen below:
Remove the indicated screws from the Lighfry oven and retain them for re-installation
Set the EcoFry on top of the Lightfry making sure that the inlet tube of the EcoFry slides over the exhaust
chimney of the oven.
Align the EcoFry so that the holes for the removed screws are visible and then re-install the removed
screws to secure the EcoFry to the oven.
If a gap exists between the top of the oven and the flanged foot on the front of the EcoFry, loosen the
screws on the flange foot and press downward on the flange to close the gap. Re-tighten the screws.
Tabla de contenidos
