!
!
!!
!
!
!
!
!
light-for-me!
User’s Manual!
3XML Alexandra RCA head*!
!
Light-for-me 3XML Alexandra head:!
!
- 3 x XML diodes!
- 4th red signalling diode!
- 3600 lumens!
- light angle: 13 degrees!
-36 W!
- piezo switch!
- three modes of light: 10%, 50% and 100%!
- control over LEDs temperature!
- control over battery pack discharge!
- made from anodised aluminium!
- detachable cable!
- cable length:!
!!standard: 110cm!
!!SideMount (custom made): up to 123cm!
!
!
3XML Alexandra head can be powered by light-for-me ACCUS with compatible RCA cable
entry point. Burn time (given at 100% power) depends on the battery pack and is as
follows:!
!
ACCU XS 4.4Ah: !2.2h!
ACCU S 6.6Ah: !3.2h!
ACCU M 11.25Ah: !5.2h!
ACCU L 20Ah: !9.6h!
!
Given burn times may differ from actual burn time +/- 10%.!
Given burn times are based on battery packs provided by light-for-me only.!
Given burn times are based on one head connected only.!
!
4th red signalling diode - this diode lights up when:!
- there is a break in connection head - battery pack; this can happen if the RCA plug was
not connected properly to the port or when the RCA plug or port are rusty/dirty;!
-the battery pack voltage is too low to power the head;!
-there is an error on the driver board.!
In all the above situations the red diode flashes!
!
*This manual refers to 3XML Alexandra head & 3XML Alexandra Heavy-Duty hea!
