Light Emotion LE90 Manual de usuario

www.lightemotion.com.au

LE90

90w LED Moving Head Spot

User’s instruction manual

This manual contains important information about the safe installation and use of this product

Please read this instruction manual carefully before installing or operating

Please keep these instructions in a safe place for future reference

V1.00

Contents

1. Safety Instructions 2

2. Installation 3

3. Features 3

4. Menu Operation 4

5. Stand Alone Operation 4

6. Master/Slave Operation 5

7. DMX Table 5

8. DMX Connection 7

9. DMX Address Setting 7

10. DMX Terminator 8

11. Cleaning and Maintenance 8

12. Technical Data 9

13. Warranty 10

Introduction

Thank you for the purchase of your LE90 LED Moving Head Spot by Light Emotion. We are

confident you will be satisfied with your purchase and enjoy many years of use from this

Professional Light Emotion product. Please read these instructions carefully to ensure the

product is well look after and used correctly to avoid any potential problems.

Please note that as part of our ongoing commitment to continuous improvement and product

development, the specifications in this manual are subject to change without notice. Whilst

every care has been taken in the preparation of this manual we reserve the right to change

specifications in the course of product improvement.

What is in the box:

- 1 x LE90 Moving Head

- 1 x Power Cable

- 1 x Mounting bracket

- This user manual

1. Safety Instructions:

Please read these instructions carefully. It includes important information about the installation

usage and maintenance of this product.

- Please keep this User Manual for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction booklet.

- Always make sure that you are connecting to the proper voltage and that the line voltage you

are connecting to is not higher than that stated on the sticker of the fixture.

- This fixture is designed for indoor use only and cannot be used for outdoor applications or

exposed to moisture.

- Make sure there are no flammable materials close to the unit while operating.

- The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surface. Be sure that no ventilation slots are blocked.

- Always disconnect from power source before servicing.

- Secure fixture to stands, trussing and the like using a safety chain.

- Due to the fact this is a moving head, be sure that the movement of the head is free from any

obstructions which could damage the unit if come into contact.

- Maximum ambient temperature is 40˚C. Do not operate fixture at temperatures higher than

this.

- In the event of serious operating problem, stop using the unit immediately. Never try to repair

the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.

Please contact the nearest authorized technical assistance centre.

- Make sure power cord is never crimped or damaged.

- Never disconnect power cord by pulling or tugging on the cord.

- Never carry the fixture directly from the cord. Carry by holding the chassis of the unit.

- Avoid direct eye exposure to the light source while it is on.

2. Installation:

Caution: For safe mounting of this product, please read the following carefully.

- When mounting the product, do not stand directly underneath the product.

- When mounting in fixed installation, use the provided brackets. Please ensure the unit is

being attached securely to any surface – consult a professional for the installation if need be.

- Always use a safety chain when mounting the product on stands, trussing or bars. Make sure

the breaking strain rating of the chain is at least 10 times the weight of the product.

- Product will work in either upright or upside down orientation. It cannot work in a

perpendicular orientation where the base is on the side as such – for example you cannot

mount the base to a wall with the moving head protruding out from the wall – this can cause

damage to the driver motors and ultimate failure.

- Make sure there is adequate ventilation around the product.

- Never look directly into the LED light sources of the product.

- Keep out of reach of children.

3. Features

This product is designed as a professional LED moving head and is only intended to be used as

such for entertainment, display and architectural applications. Due to our ongoing commitment

to constantly reviewing and improving products, features and specifications are subject to

change without prior notice.

- LED: 90w white LED source with average 50000 hours lifespan -

- Beam angle

：

12º

- Control: DMX, built-in programs, sound activation and Master/slave

- 16 DMX channels

- Pan 540 º Tilt 270 º (plus 16 bit fine)

- 0-100% linear dimming

- Blue text LCD display menu with 4 control buttons

- Colour Wheel: 7 colours + open, rainbow flow effect

- Gobo Wheels: 8 fixed gobos + open, flow effect and gobo shake

6 rotating gobos + open, flow effect and gobo shake

- Weight: 6.8kg

- Product size: 260x250x350mm

4. Menu Operation

Used for setting up or operating the product without DMX control

Menu or Mode: Press each time to access features – see table below.

UP: Increase setting

DOWN: Decrease setting

Enter: Confirm and save setting.

Menu Map:

5. Stand Alone Operation.

To run the fixture in stand alone mode, press MODE or MENU until the display says SHOW

MODE. Then, press enter and use the UP / DOWN buttons to navigate between Slow Mode,

Fast Mode or Sound Mode. Once you have chosen the show, press Enter.

DMX SET

001

512

512 Add setting

Show Mode

Mode

DMX control mode

Fast Mode

Fast running mode

Slow Mode

Show running mode

Sou

Sound running mode

Sound Sense

Sound sensitivity adjusting

Pan Inverse

OFF

X clockwise moving

X anti

clockwise moving

ilt

Inverse

OFF

Y clockwise moving

Y anti

clockwise movin

Default

confirm

YES

default

Fixture

REST

YES

reset

MENU UP DOWN ENTER

6. Master/Slave operation

To run in Master/Slave mode, chose on of the fixtures to be the master. Connect DMX cable

from the output of that fixture to the input of the second. For each additional fixture, connect

DMX cable from output of the previous fixture to the input of the next and so on. On the unit

deemed to be the Master, chose a show to play like you would in stand/alone mode.

For each of the slave units, chose DMX mode with the first slave (second fixture) set to

channel 1, the next to 17, the next to 33 and so on.

You can also choose to invert the pan and/or the tilt from the menu which allows fixtures to

mirror each other in certain shows. This is especially useful when you have say one on either

side of a stage and you desire for the beams from the shows to look more like they are coming

together or moving away together.

In order to invert the pan or tilt, press the mode button until you reach pan or tilt inverse, press

enter, and use UP/DOWN to turn on or off.

7. DMX Channel Allocation and functions tables.

The following is the DMX channel allocation for this fixture which utilizes 16 DMX channels.

Channel Function Value

1 Pan 0-255 - 0° to 540°

2 Tilt 0-255 - 0° to 270°

3 Dimming 0-255 - 0-100%

4 Strobe

0-10 Full on

11-249 Strobe from slow to fast

250-255 Full on

5 Colour

0-9 White (no colour)

10 Red

20 Green

30 Blue

40 Yellow

50 Magenta

60 Light Green

70 Cyan

80-161 Half colours (in above order)

162-255 Rainbow effect from slow to fast

6 Gobo Wheel

0-35 No gobo (clear)

36 8 growing spots gobo

72 Five pointed star gobo

108 Three pointed overlap-style gobo

144 Ten pointed bicycle wheel-type gobo

180 Three comma-shapes in a circle

216 Eight diamonds gobo

220-255 Gobo flow from slow to fast

7 Gobo

Rotation

0-7 No effect

8-89 Gobo position indexing

90-167 Gobo rotation anti clockwise

168-255 Gobo rotation clockwise

8 Gobo Shake

0-10 No effect

11-249 Gobo shake from slow to fast

250-255 No effect

9 Gobo Wheel

0-26 No gobo (Clear)

27 Twelve blade fan-type gobo

54 Rose logo

81 Six comb-shapes gobo

108 Three flower-shapes gobo

135 Sixteen fan blade-like gobo

162 3D spots type gobo

189 Clouds gobo

216 Random pointy shapes gobo

220 Gobo-flow from slow to fast in order

Gobo shake

for gobo

wheel 2

0-10 No effect

11-249 Gobo shake from slow to fast

250-255 No effect

11 Focus 0-255 Focus from near to far

12 Prism

0-49 No effect

50-100 Prism on

101-255 Prism rotate from slow to fast

13 Speed 0-255 Speed from slow to fast

14 Pan fine 0-255 Fine pan adjust 16 bit

15 Tilt fine 0-255 Fine tilt adjust 16 bit

16 Reset 150-200 Resets the fixture.

8. DMX-512 Control Connection

Using a 3 pin XLR cable, you can connect the product to a DMX controller and then to

other fixtures with 3 pin XLR inputs and outputs. When not using DMX, multiple

fixtures can be connected together and operate under master/slave control. The signal

cable should be two core with shielded cable, the signal connectors are XLR input and

output connectors. Please refer to the below diagram:

9. DMX Address Setting

When being used in conjunction with a DMX controller, each fixture must be set a specific

starting address. When receiving signal, fixture will receive channel control signals of this

address from the DMX controller.

For simplicity, the user can use the same address for multiple fixtures but this will result in

each fixture providing exactly the same output and fixtures with the same DMX address cannot

be individually controlled.

To control each fixture individually via DMX, each fixture must have its own unique DMX

address. Depending upon which DMX mode this fixture is set in, the individual DMX

addresses must be separated by at least the same number of channels.

So for example – assuming the first fixture is DMX channel 1, the second fixture would need

to be on channel 17, then the 3

channel 33 and so on as each fixture uses DMX 16 channels.

Refer to your DMX controllers’ instruction manual on how best to manage your DMX channel

allocation.

10. DMX Terminator:

A DMX terminator helps to reduce ‘noise’ on the DMX chain, and makes the light respond to

control more accurately. It should be plugged in to the last fixture in any chain. For Terminator

connections please see below:

11. Cleaning and maintenance

From time to time it is recommended the product is cleaned to ensure maximum light output

and performance. Before cleaning, please unplug mains power from the unit.

Use a wet cloth to clean the housing as well as the lenses and base. Glass cleaner is also

suitable but alcohol based cleaners and solvents cannot be used as they will cause damage to

the product.

When used in a fixed long term installation such as a venue or club, the unit should be

periodically taken down from the installation and professionally cleaned. Dust build-up within

the unit can cause damage and ultimately failure of components.

The manufacturer’s recommended regularity of cleaning is once every 3 weeks for the exterior

lens and every two months for the interior optics.

12. Technical Data

- Input voltage: 90-240VAC, 50 or 60Hz

- Power consumption: 95W

- LEDs: 1 high powered 90W LED with average 50000 hours lifespan

- Beam angle: 12º

- Control: DMX or on-board built-in programs, sound activation, master/slave

- 16 DMX channels

- Colour wheel: 7 colours + open (white), rainbow/flow effect

- 2 Gobo wheels: 6 gobos + open (clear), with rotating gobos, gobo shake and gobo flow effect.

wheel 8 gobos + open (clear), gobo shake and gobo flow effect.

- Electronic strobe rate: 1-25Hz

- Dimming: 0-100% linear dimming

- Built in programs

- Pan 540

- Tilt 270

- Weight: 6.8kg

- Product size: 260x250x350mm

Tabla de contenidos

Otros manuales de Equipo de DJ de Light Emotion

Light Emotion

Light Emotion P64LEDLITE Manual del operador

Light Emotion

Light Emotion BRUTE Manual del operador

Light Emotion

Light Emotion MOONSTAR4 Manual del operador

Light Emotion

Light Emotion MUSHROOMLED Manual del operador

Light Emotion

Light Emotion RAZORTRI Manual de usuario

Light Emotion

Light Emotion P64100RGB Manual del operador

Light Emotion

Light Emotion Firefly Series Manual de usuario

Light Emotion

Light Emotion LE60 Manual del operador

Light Emotion

Light Emotion COB150RGBW Manual del operador

Light Emotion

Light Emotion P64LEDLITEWW Manual del operador

Light Emotion

Light Emotion HALFBALL Manual del operador

Light Emotion

Light Emotion DERBY4 Manual del operador

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario