Life Span Traction II Manual de usuario
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
TRACTION II
OWNER’S MANUAL
2
TRACTION II
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. IMPORTANT ELECTRICAL INFORMATION 4
3. IMPORTANT OPERATING INSTRUCTIONS 5
4. ASSEMBLY INSTRUCTIONS 6
5. FOLDING INSTRUCTIONS 9
6. INCLINE INSTRUCTIONS 10
7. GROUNDING METHODS 11
8. OPERATION GUIDE 12
9. EXERCISE GUIDE 18
10. MAINTENANCE GUIDE 20
11. EXPLODED DIAGRAM 24
12. PARTS LIST 25
13. TROUBLE SHOOTING GUIDE 27
14. WARRANTY 29
3
TRACTION II
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this treadmill.
It is important your treadmill receives regular maintenance to prolong its useful life. Failing to
regularly maintain your treadmill may void your warranty.
Danger –To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to
cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY
USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.
Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and
treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of
the treadmill and any fixed object.
Place your unit on a solid, level surface when in use
Never allow children on or near the treadmill.
When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should
you fall or move too far back on the treadmill.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being administered.
Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
The treadmill is intended for in-home use only and not suitable for long time running.
4
TRACTION II
To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug
from the outlet.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
Use the handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Allowed temperature: 5 to 40 degrees.
Remove the safety key after use to prevent unauthorized treadmill operation.
2. IMPORTANT ELECTRICAL INFORMATION
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power
cord away from any moving part of the treadmill including the elevation mechanism and transport
wheels.
NEVER remove any cover without first disconnecting AC power.
NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,
near a pool, or in any other high humidity environment.
5
TRACTION II
3. IMPORTANT OPERATING INSTRUCTIONS
Be sure to read the entire manual before operating your machine.
Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
Use caution while participating in other activities while walking on your treadmill, such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the centre of the belt; which may result in serious injury.
In order to prevent losing balance and suffering unexpected injury, NEVER mount or dismount the
treadmill while the belt is moving. This unit starts with at a very low speed. Simply standing on the
belt during slow acceleration is proper after you have learned to operate this machine.
Always hold on to handrail while making control changes.
A safety key is provided with this machine. Remove the safety key will stop the walking belt
immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure.
6
TRACTION II
4. ASSEMBLY INSTRUCTIONS
1
19
22L/R
23
33
51
52
62
63
84
86
91
92
PART LIST
NO.
DESCRIPTION
REMARK
Q’Y
NO.
DESCRIPTION
REMARK
QTY
1
MAIN FRAME
1
62
BOLT
M8*15
８
19
SAFETY KEY
1
63
BOLT
M6*25
6
22L/R
FRONT COVER
2
84
INNER WASHER
∮8.4*∮14.5*
t0.8
８
23
FOOT PLATE
2
86
MP3 OUTPUT
WIRE
1
33
FOOT PLATE PLUG
6
91
BOLT
M4*15
6
51
ALLEN WRENCH
S5
1
92
ALLEN WRENCH
S6
1
52
SCREW DRIVER
1
7
TRACTION II
STEP 1:
STEP 2:
1. Use the M8*15 bolt (62) and washer (84) to
lock the computer (18) to the upright
(4L/4R).
1. Open the box and put mainframe on the
floor;
2. With both hands holding the computer (18),
rotate the uprights (4L/4R) so it is aligned
with the arch pocket on mainframe (2) as
shown by the arrow
3. Use the M8*15 bolt (62) and washer (84) to
secure the uprights (4L/R) to the
mainframe (2)
4. Use the M4*15 bolt (91) to secure the
cover (22) to the mainframe (2)
5. Pull up (4L/4R), as shown by the arrow,
and rotate until it is aligned with the arch
pockets on uprights (4L/4R).
8
TRACTION II
STEP 3:
STEP 4:
ATTENTION
You must first confirm that you have performed a complete assembly as outlined above and
secured all nuts bolts before proceeding with the following.
1. Put on the safety key and MP3 output wire
1. Use the M6*25 bolt (63) to lock the foot
plate (23) to the running board (13) tightly
2. Attach the foot plate plug (33)
9
TRACTION II
5. FOLDING INSTRUCTIONS
Folding:
Unfolding:
Erect the base frame using position (A)
until you hear the click sound emitted by
the lock pin
Whilst supporting position (A) with your
hand, use your hand to pull the spring
pin (B) lightly and allow the machine to
descend but itself smoothly.
A
A
B
10
TRACTION II
6. INCLINE INSTRUCTIONS
PICTURE 1
PICTURE 2
“INCLINE+/-”and “+/-”on left handrail are incline add and subtract buttons.
When adjusting the incline whilst the treadmill is running, the increase is 1 level per press.
Holding the incline for button more than 2 seconds will quickly increase or decrease the incline.
There are also shortcut keys 3, 6, 9, 12 on the computer.
Picture 1 shows incline ”0”, Picture 2 shows incline “20”.
Tabla de contenidos
Otros manuales de Rueda de andar de Life Span
Life Span
Life Span PRO Series Manual de usuario
Life Span
Life Span Equalizer Manual de usuario
Life Span
Life Span TR200i Manual de usuario
Life Span
Life Span TR2500-HRC Manual de usuario
Life Span
Life Span SPIRIT Manual de usuario
Life Span
Life Span Workplace DT-3 Manual de usuario
Life Span
Life Span STYLE Manual de usuario
Life Span
Life Span LS Series Manual de usuario
Life Span
Life Span Workplace DT-3 Manual de usuario
Life Span
Life Span BOOMER Manual de usuario
Life Span
Life Span TR2000e Manual de usuario
Life Span
Life Span EXPLORER Manual de usuario
Life Span
Life Span BOOST-R Manual de usuario
Life Span
Life Span Delta 2.0 Manual de usuario
Life Span
Life Span PERFORMER PLUS Manual de usuario
Life Span
Life Span M3 Manual de usuario
Life Span
Life Span GOLD 2.0 Manual de usuario
Life Span
Life Span SPORTZ Manual de usuario
Life Span
Life Span TORQUE III Manual de usuario
Life Span
Life Span COMMANDER Manual de usuario
Manuales populares de Rueda de andar de otras marcas
Smooth Fitness
Smooth Fitness EVO 3i Manual de usuario
NordicTrack
NordicTrack NETL81810.0 Manual de usuario
Schwinn
Schwinn 830/Journey 8.0 Manual de usuario
Keys Fitness
Keys Fitness HealthTrainer HT-740T Manual de usuario
Spirit
Spirit XT8 Manual de usuario
NordicTrack
NordicTrack T 14.0 Treadmill Manual de usuario