Liesegang ddv 2300 Manual de usuario
i
USER’S Manual
ddv 2300
ii
Notice
The information in this user’s Manual’s subject to change without notice.
THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR
ERRORS OR OMISSIONS CONTAINED IN THIS MANUAL AND SHALL
NOTBE LIABLE FOR ANY CONSEQUENTIAL DAMAGES, WHICH MAY
RESULT FROM THE PERFORMANCE OR USE OF THIS MANUAL.
The information in this user’s Manual’s protected by copyright laws. No
part of this manual may be photocopied or reproduced in any form without
prior written authorization from the copyright owners.
© Copyright Nov, 2002
All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks of their
respective owners/companies.
iii
TABLE OF CONTENTS
PREFACE
Protecting Your Projector
- Avoid Abusive Handling and Adverse Environment
Symbols
1. GETTING TO KNOW THE BASICS
Performance Features (1-2,3)
Supplied Accessories (1-3)
System at a Glance (1-4)
Front View (1-4)
Top View (1-5,6)
Rear View (1-7,8)
Right-Side View (1-8)
Left-Side View (1-9)
Bottom View (1-9)
Control Panel and Remote Control (1-10,11,12)
Control Panel (1-10)
Remote Control (1-11,12)
Remote Instruction Operating Range (1-13)
Projector Operation (1-13,14,15,16,17,18)
Setting Up Procedure (1-13)
Connecting Projector to Equipment (1-14,15,16)
Starting the Presentation (1-16,17)
Ceiling Mount Projection Setting Procedure (1-18)
2. ON SCREEN DISPLAY MENU DESCRIPTION
Status Signals (2-2,3)
OSD Menu (2-3)
Adjust Menu (2-4,5)
Setup Menu (2-6,7)
Color Management Menu (2-8)
Language Menu (2-9)
Utility Menu (2-10)
Status Menu (2-11)
3. CLEANING, MAINTENANCE AND TROUBLESHOOTING
Cleaning (3-2)
Clean The Lens (3-2)
Clean Exterior Case (3-2)
Maintenance (3-3)
Lamp Replacement (3-3,4)
Resetting the Lamp (3-5)
Troubleshooting (3-6)
iv
Image Problems (3-7,8,9)
Lamp Problems (3-9)
Other Problems (3-10)
LED Indicator Error Messages (3-10)
Appendix A REFERENCE
Product Specification (A-2)
Projection Distance V.S. Projection Size (A-3)
Present Timing (A-4)
Appendix B AGENCY REGULATORY NOTICES
Federal Communications Commission Notice (B-2)
Compliance Information For Canada (B-3)
User Information for all Countries (B-3)
v
Preface
Using This Manual
This User’s Manual contains general information about your projector,
hardware installation and OSD setting information, troubleshooting, and
technical specifications.
Protecting Your Projector
- Avoid Abusive Handling and Adverse Environment
Follow the advice below will help ensure that you get the most out of your
Investment.
Your projector will serve you well if you take good care of it.
Do not expose the projector to direct sunlight or place it near
sources of heat.
Do not subject it to temperatures below 10
°
C or above 35
°
C.
Do not expose the projector to magnetic fields.
Do not expose the projector to moisture or rain.
Do not spill water or liquid on the projector.
Do not subject the appliance to adverse shock and vibration.
Do not place the appliance to areas susceptible to excessive
dust, dirt, and smoke.
Do not place objects on top of this product to avoid damaging it.
Do not block the ventilation slots.
Do not place the projector on rocky surfaces, unstable table or
shaky stand.
Do keep the fan running for a few minutes cooling, before
powering off the product.
Do disconnect the power plug from AC outlet if the projector
won’t be able to use for a while.
Do operate your projector without the lamp module or lamp
module door.
Complying with safety instructions will keep you away from fire,
electric shock, bodily injury or property damage.
To reduce the risk of causing electric shock, fire or property
damage:
Do not assemble the projector.
If the service or repair is required, Please take it to the
customer service center nearby you.
Do not expose the appliance to rain or moisture.
Do not replace lamp assembly or any electronic
components unless the projector is unplugged.
vi
To reduce the bodily harm:
Do not stare directly into the lens as possible eye injury
could occur since this projector produce intense light from
the projection lens. Be especially careful that children do
not look into the beam directly.
When cleaning the projector, observe these steps:
1. Switch off the projector and disconnect the power plug from AC
outlet.
2. Use a soft cloth dampened with mild detergent to clean the
housing. Do not use liquid or aerosol cleaners.
Contact your dealer or see your service technician if any of the
following occurs:
Projector has been dropped or the body has been d
amaged.
Liquid has been spilled into the product.
The projector does not operate normally.
Symbols
This manual contained have been categorized in accordance with
seriousness of potential hazards through the icons. Each of the icons
represents its own meaning as below.
Note: Warning:
Note:
Text in this format and symbol
means specific instructions,
commentary, sidelights, or any
additional information or notes
that you should be aware of.
Warning:
Text is this format and symbol
means that failures to comply
with the given instructions or
information could result in
damage to your projector or
could cause bodily harm or
loss of life.
GETTING TO KNOW THE BASICS
1
GETTING TO KNOW
THE BASICS
This section introduces the features and
components of the DLP Projector.
USER’S MANUAL
1-2
Performance Features
High Resolution
By using advanced video “Digital Light
Processing” technology, it is fully compatible
with true XGA and supports SXGA. This lets
you display your clear compression images
without line omission.
Convenient Presentation Design
With this feature, you won’t have to stand next
to your computer or give hand signal to your
partner when you require changing slides. You
can fully focus on connecting and
communicating with your audience, not with
your computer while giving presentations.
Auto Source Selection
The projector will auto detect display signal
source from any attached equipment such as
computing system and video appliances.
Easy Keystone Correction
If the projection position is set to the height of
line of vision, there won’t be any keystone
issue. On the contrary, when projecting above
or under the height of line of vision, image
distortion might occur. The distortion is easy
to be adjusted by using the keystone
correction.
Auto Image Optimization
The projector will automatically optimize the
parameters and present a good image quality
adapted to the new circumstance.
GETTING TO KNOW THE BASICS
3
Multilanguage OSD Menu Support
The On Screen Display Menu in 7 languages
provides users with informative data to aid
users to re-set the parameters while operated
in their own native language.
Supplied Accessories
Make sure that all of the following accessories are
included in the package besides the projection unit. If
anything is missing, please contact your dealer
immediately.
Power Cord Computer Cable: M1-DA
Audio Cable S-Video Cable
Remote Controller Batteries (2x “AAA”)
Quick Start Guide CD-Wizard (User’s Guide)
Lens Cap Carrying Case
Note:
Please keep the
original packing
material for future
shipment.
USER’S MANUAL
1-4
System at a Glance
Front View
1. Projection Lens
This is where the beam of light projected.
2. Ventilation Grills
The fan grills are where air is exchanged in and out
of the projector for internal thermal regulation.
Restricting the airflow can cause it to overheat and
turn off. If this happens, you must wait for a couple
of minutes before attempting to turn it back on.
3. Adjusting Feet
The projector is equipped with 2 adjuster feet.
Push the adjusters to adjust its tilt angle.
1) Life the projector up and press the adjuster
button to release the adjuster.
2) The adjuster will drop into position and be
locked.
4. Remote Control Sensor
This is where the remote control signal received.
Warning:
Do not stare directly
into the lens as
p
ossible eye injury
could occur since
this projector
p
roduce intense
light from the
p
rojection lens. Be
especially careful
that children do not
look into the beam
directly.
Illustration 1-1
12
4
3
Tabla de contenidos
Otros manuales de Proyector de Liesegang
Liesegang
Liesegang 283A Manual de usuario
Liesegang
Liesegang dv 420 Manual de usuario
Liesegang
Liesegang DV610 Manual de usuario
Liesegang
Liesegang dv 481 Manual
Liesegang
Liesegang dv 900 Manual de usuario
Liesegang
Liesegang dv 420 Manual de usuario
Liesegang
Liesegang dv 483 Manual
Liesegang
Liesegang Solid Cinema 215 Manual de usuario
Liesegang
Liesegang e-motion4100 Manual de usuario
Liesegang
Liesegang 251 Manual de usuario
Liesegang
Liesegang dv475 Manual de usuario
Liesegang
Liesegang dv 540 flex Manual de instrucciones
Liesegang
Liesegang DV 880 Manual de usuario
Liesegang
Liesegang Mayfair Manual de usuario
Liesegang
Liesegang ddv 3200 Manual de instrucciones
Liesegang
Liesegang Solid Ultra Documento técnico
Liesegang
Liesegang ddv 1800 Manual de usuario
Liesegang
Liesegang ddv 2100 Manual de instrucciones
Liesegang
Liesegang dv410 Manual de usuario
Liesegang
Liesegang DV 470 Manual de usuario
