LG RF-17FB70 Series Manual de usuario

Colour Television

OWNER’S MANUAL

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this

information to your dealer when you require service.

Model number :

Serial number :

ME06

0455Ken-05/05/24 5/24/94 4:31 PM Page 1

Contents

Installation 3

Location and function of controls 4

Remote control handset

Battery installation

Front panel / Side panel

Basic operation 7

On and off / Programme selection

Volume adjustment / Quick view

Mute function / Auto Demonstration

TV Swivel function (option)

On screen language selection (option)

On screen menus 8

Menu selection

Setting up TV stations 9

Auto programme tuning

Manual programme tuning

Fine Tuning / Programme edit

Favorite programme

Calling the programme table

Picture adjustment 14

PSM (Picture Status Memory)

Picture adjustment / Eye (option)

Turbo picture selection (option)

Sound adjustment (option) 16

SSM (Sound Status Memory)

Balance adjustment

Turbo sound selection (option)

Sound output selection

Stereo/Dual reception (option)

NICAM reception (option)

Other functions 19

TV and AV modes

Auto AV switching (option)

Child lock / Auto sleep / Blue back (option)

AVL (Auto Volume Leveler) (option)

CSM (Colour Status Memory) / Sleep timer

Game (option) 21

Block & Balloon (option)

Cricket & Car racing (option)

Timer (option) 22

Off timer / On timer

Teletext (option) 23

Switch on/off

SIMPLE text / TOP text (option)

FASTEXT / Special teletext functions

Connection of external equipment 26

Aerial socket

Audio-L/R(or Audio)/Video in/out sockets (option)

Euro scart socket (option)

Component in sockets (option)

Headphone socket (option)

Troubleshooting check list Back cover

0455Ken-05/05/24 5/24/94 4:31 PM Page 2

Installation

Power

This set operates on an AC mains supply, the voltage is as indicat-

ed on the label on the back cover. Never apply DC power to the set.

In the event of thunderstorms or powercuts, please pull out the aer-

ial and mains plugs.

Warning

To prevent fire or shock hazard, do not expose the set to rain or

moisture.

The working life of this set is 7 years since the date of delivery to

consumer.

Service

Never remove the back cover of the set as this can expose you to

very high voltage and other hazards. If the set does not operate

properly, unplug it and call your dealer.

Aerial

Connect the aerial cable to the socket marked +75

Ω

on the back

cover. For the best reception an outdoor aerial should be used.

Location

Position your set so that no bright light or sunlight falls directly onto

the screen. Care should be taken not to expose the set to any

unnecessary vibration, moisture, dust or heat. Also ensure that the

set is placed in a position to allow a free flow of air. Do not cover

the ventilation openings on the back cover.

0455Ken-05/05/24 5/24/94 4:31 PM Page 3

Location and function of controls

All the functions can be controlled with the remote control handset.

Some functions can also be adjusted with the buttons on the front

panel of the set.

Remote control handset

Before you use the remote control handset, please install the bat-

teries. See the next page.

1. POWER

switches the set on from standby or off to standby.

2. NUMBER BUTTONS

switches the set on from standby or directly select a number.

3. MENU (or INDEX)

selects a menu.

selects an index page in the teletext mode (only TELETEXT

models).

4. EYE/*(option)

switches the eye function on or off.

5. / (Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

scans programmes automatically.

F / G (Volume Up/Down)

adjusts the volume.

adjusts menu settings.

accepts your selection or displays the current mode.

6. Q.VIEW

returns to the previously viewed programme.

selects a favorite programme.

7. TELETEXT BUTTONS (option)

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

8. PSM (Picture Status Memory)

recalls your preferred picture setting.

9. TURBO PICTURE / SOUND BUTTON (option)

selects Turbo picture and sound.

POWER MUTE

123

456

789

MENU/INDEX

TV/AV

TEXT/MIX/ SIZE/ HOLD/

EYE/

Q.VIEW

LIST

I / II /

( )

OK VOLVOL

UPDATE/

PSM SSM/ SLEEP/ M

TIME/ REVEAL/

TURBO/

PICTURE SOUND

( )

(With TELETEXT)

0455Ken-05/05/24 5/24/94 4:31 PM Page 4

Location and function of controls

10. MUTE

switches the sound on or off.

11. TV/AV

selects TV or AV mode.

clears the menu from the screen.

switches the set on from standby.

12. I/II/*(option)

selects the language during dual language broadcast. (option)

selects the sound output.

13. LIST

displays the programme table.

14. SLEEP

sets the sleep timer.

15. SSM/*(option) (Sound Status Memory)

recalls your preferred sound setting.

16. SURROUND (ºº/*) (option)

selects surround sound.

*: No function

COLOURED BUTTONS : These buttons are used for teletext (only

TELETEXT models) or programme edit.

Battery installation

The remote control handset is powered by two AAA type batteries.

To load the batteries, turn the remote control handset over and

open the battery compartment. Install two batteries as indicated by

the polarity symbols ( and ) marked inside the compartment.

Note : To avoid damage from possible battery leakage, remove the

batteries if you do not plan to use the remote control handset for an

extended period of time.

(Without TELETEXT)

POWER MUTE

123

456

789

TV/AV

EYE/

Q.VIEW

LIST

I / II /

( )

OK VOLVOL

PSM SSM/ SLEEP

PICTURE SOUND

TURBO/

0455Ken-05/05/24 5/24/94 4:31 PM Page 5

1. MAIN POWER (ON/OFF)

switches the set on or off.

2. POWER/STANDBY INDICATOR

illuminates brightly when the set is in standby

mode.

dims when the set is switched on.

blinks when signal is input from the remote

control.

3. REMOTE CONTROL SENSOR

4. MENU

selects a menu.

5. OK

accepts your selection or displays the current

mode.

F / G (Volume Up/Down)

adjusts the volume.

adjusts menu settings.

D / E(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

6 HEADPHONE SOCKET

Connect the headphone plug to this socket.

7. AUDIO - L/R (or AUDIO) / VIDEO IN SOCK-

ETS (AV) (option)

Connect the audio/video out sockets of exter-

nal equipment to these sockets.

Note :If both the input jacks on the front/side

panel and back panel have been connected to

external equipments simultaneously, only the

input jacks on the front/side panel can be

received.

8. EYE (option)

adjusts picture according to the surrounding

conditions.

Note : Shown is a simplified representation of

front or side panel. Here shown may be somewhat

different from your set.

Location and function of controls

1 2 3 4 5

RF/RT-17/21FB70 series

Front panel

Side panel

VIDEO

RAUDIO

VIDEO LR

AUDIO

VIDEO LR

AUDIO

MENU OK VOL PR

1 2 3 4 5

RF/RT-21FD30 series

1 2 3 4 5 8

RF/RT-21FB90 series

MENU OK VOL PR

1 2 3 4 5

RF/RT-21FD10 series

0455Ken-05/05/24 5/24/94 4:31 PM Page 6

Basic operation

On and off

1. Press the main power button to switch the set on.

2. If the set is in standby mode, press the POWER, D / E, TV/AV or

NUMBER buttons on the remote control handset to switch it on fully.

3. Press the POWER button on the remote control handset.

The set reverts to standby mode.

4. Press the main power button again to switch the set off.

Note : If, while the set is switched on, the mains plug is discon-

nected the set will switch to standby or power on when the mains

plug is replaced in the mains power socket.

Programme selection

You can select a programme number with the D / E or NUMBER

buttons.

Volume adjustment

Press the F / G button to adjust the volume.

Quick view

Press the Q.VIEW button to view the last programme you were

watching.

Note : This function works only when Favorite programme is

set to Off. Otherwise each press of this button will select a stored

favorite programme.

Mute function

Press the MUTE button. The sound is switched off and the display

appears.

You can cancel it by pressing the MUTE, F / G,SSM/*, I/II/*,

ºº/*or TURBO SOUND button.

Auto Demonstration

To review all the menus programmed in the set, press the OK or

button of the front panel control for about 5 seconds. To stop auto

demonstration, press any button of the front panel control and

POWER button of the remote control.

TV Swivel function (option)

In some models, you can manually turn TV set at left or right direc-

tion by 15 or 20 degrees, so that the watching degree is suitable for

your position.

Note : Swivel panel is fixed in the hole at the swivel panel on the

back of the set by small bar(Swivel fixer). To operate this function,

pull it out.

On screen language selection (option)

The menu can be displayed on the screen in desired language.

First select your language.

1. Press the MENU button to select the Station menu.

2. Press the Gbutton and then D / E button to select Language.

3. Press the Gbutton and then D / Ebutton to select your desired

language.

All the on screen displays will appear in the selected language.

Press the OK or F button to select the station menu.

4. Press the TV/AV button to return to normal TV viewing.

POWER MUTE

123

456

789

TV/AV

Q.VIEW

I / II /

( )

OK VOLVOL

SSM/

TURBO/

SOUND

0455Ken-05/05/24 5/24/94 4:31 PM Page 7

On screen menus

The dialogue between you and your set takes place on screen with

an operator menu. The buttons required for the operating steps are

also displayed.

Menu selection

1. Repeatedly press the MENU button to display each menu.

2. Press the Gbutton and then D / E button to select a menu item.

3. Press the Gbutton to display the sub menu or the pull-down

menu.

4. Change the setting of an item in the sub or pull-down menu with

F / Gor D / E.

You can move to the higher level menu by pressing the OK or F

button and to move to the lower level menu by pressing the Gbut-

ton.

Note :

a. In the AV mode, the Station menu is not displayed.

b. In the teletext mode, menus are not displayed.

c. In mono models, the Sound menu does not appear.

d. In some models, the Normal/Turbo search will not display,

only the Start will display in the Auto programme menu.

e. In some models, the Language or Booster will not display.

( )

OK VOLVOL

Station menu

Picture menu

Sound menu

Special menu

TV programme

CH.

AutoOprogramme

{

ManualOprogramme

{

Program meOedit

{

FavoriteOprogramme

{

Language

{

()O{

OKOMENUOTV®AV

CH.

P M

{

User

{

()O{

OKOMENUOTV®AV

CH.

{

Balance

{

CH.

Input

{

Child

lock

{

Auto

sleep

{

Blue

back

{

AVL

{

C M

{

Game

{

Timer

{

()O{

OKOMENUOTV®AV

()O{

OKOMENUOTV®AV

ystem

{

torageOfrom

{

NormalOsearch

{

TurboOsearch

{

ystem

{

OBG

OOI

ODK

OOM

()O}{OOKOMENUOTV®AV

PR.

{

ystem

{

Channel

{

Fine

{

earch

{

Name

{

Booster

{

OO 9

()O}{OOKOMENUOTV®AV

00O

OO05OO6O9

01OCO0O3OO06OO1O7

02OCO1O2OO07OO2O2

03OO6O6OO08OCO0O9

04OO6O7OO09OCO1O1

DeleteOOOCopy

MoveOOOOO kip

PR.

{

00O

0455Ken-05/05/24 5/24/94 4:31 PM Page 8

Setting up TV stations

Up to 100 TV stations can be stored by programme numbers (0 to 99).

Once you have preset the stations, you will be able to use the D / E

or NUMBER buttons to scan the stations you programmed.

Stations can be tuned using automatic or manual modes.

Note : In some models up to 200 TV stations can be stored.

Auto programme tuning

All stations that can be received are stored by this method. It is rec-

ommended that you use auto programme during installation of this set.

1. Repeatedly press the MENU button to select the Station menu.

2. Press the

Gbutton and then D / E button to select Auto pro-

gramme.

3. Press the Gbutton to display the Auto programme menu.

4. Press the

Gbutton. Select a TV system with the D / Ebutton

on the System pull-down menu;

BG : (Asia/New Zealand/M.East/Africa/Australia)

I: (Hong Kong/South Africa)

DK : (East Europe/China/Africa/CIS)

: (USA/Korea/Philippines) (option)

5. Press the OK or F button.

6. Press the D / E button to select Storage from.

7. Press the Gbutton. Select the beginning programme number

with the F / G button or NUMBER buttons on the Storage

from pull-down menu. Any number under 10 is entered with a

numeric ‘0’(or ‘00’) in front of it, i.e. ‘05’(or ‘005’) for 5.

8. Press the OK button.

9. Press the

D / E button to select Normal or Turbo searc .

Option: In some models, you can only select Start.

Note :

a. Turbo search is further faster than Normal search and in

some models, these searches will automatically store all receiv-

able stations.

b. If the programmed station has poor quality sound, select the

system again in the Manual programme menu.

10. Press the Gbutton to begin auto programming.

All receivable stations are stored.

To stop auto programming, press the MENU button.

When auto programming is completed, the Programme edit

menu appears on the screen. See the ‘Programme edit’section

to edit the stored programme.

11. Press the TV/AV button to return to normal TV viewing.

123

456

789

TV/AV

( )

OK VOLVOL

Station

ystem

{

torageOfrom

{

NormalOsearch

{

TurboOsearch

{

NormalOsearch

{

OOCO01O(BG)

77O7O7O736%

ystem

{

torageOfrom

{

NormalOsearch

{

TurboOsearch

{

77O7O7O736%

(Normal search) (Turbo search)

CH.

AutoOprogramme

{

ManualOprogramme

{

Program meOedit

{

FavoriteOprogramme

{

Language

{

()O{

OKOMENUOTV®AV

ystem

{

torageOfrom

{

NormalOsearch

{

TurboOsearch

{

ystem

{

OBG

OOI

ODK

OOM

()O}{OOKOMENUOTV®AV

TurboOsearch

{

OOCO01O(BG)

0455Ken-05/05/24 5/24/94 4:31 PM Page 9

Setting up TV stations

Auto programme scan

To automatically scan the pictures of stored programmes, press the

or button for about 3 seconds. The picture of stored pro-

grammes appears on the screen one by one.

To stop auto programme scanning, press any button except VCR

buttons.

Manual programme tuning

Manual programme lets you manually tune and arrange the sta-

tions in whatever order you desire. Also you can assign a station

name with five characters to each programme number.

1. Repeatedly press the MENU button to select the Station menu.

2. Press the Gbutton and then D / E button to select Manual

programme.

3. Press the Gbutton to display the Manual programme menu.

4. Press the D / E button to select PR..

5. Press the Gbutton to select the programme number. Select the

desired programme number (0 to 99) with the F / G button or

NUMBER buttons on the PR. pull-down menu. Any number

under 10 is entered with a numeric ‘0’(or ‘00’) in front of it, i.e.

‘05’(or ‘005’) for 5.

6. Press the OK button.

7. Press the D / E button to select System.

8. Press the Gbutton,Select a TV system with the D / Ebutton

on the System pull-down menu;

BG : (Asia/New Zealand/M.East/Africa/Australia)

I: (Hong Kong/South Africa)

DK : (East Europe/China/Africa/CIS)

: (USA/Korea/Philippines) (option)

9. Press the OK or Fbutton.

10. Press the D / E button to select C annel.

11. Press the Gbutton. Press the D / Ebutton to select V/UHF

or Cable on the C annel pull-down menu.

If possible, select the channel number directly with the number

buttons. Any number under 10 is entered with a numeric ‘0’(or

‘00’) in front of it, i.e. ‘05’(or ‘005’) for 5.

12. Press the OK or Fbutton.

13. Press the D / E button to select Searc .

14. Press the Gbutton. Press the F / G button to commence

searching on the Searc pull-down menu. If a station is found

the search will stop.

15. Press the OK button to store it. The display Stored will appear.

16. To store another station, repeat steps 4 to 15.

17. Press the TV/AV button to return to normal TV viewing.

123

456

789

TV/AV

( )

OK VOLVOL

Station

( )

CH.

AutoOprogramme

{

ManualOprogramme

{

Program meOedit

{

FavoriteOprogramme

{

Language

{

()O{

OKOMENUOTV®AV

PR.

{

ystem

{

Channel

{

Fine

{

earch

{

Name

{

Booster

{

OO 9

()O}{OOKOMENUOTV®AV

PR.

{

PR.

{

ystem

{

Channel

{

Fine

{

earch

{

Name

{

Booster

{

{{{{

tored

earch

{

0455Ken-05/05/24 5/24/94 4:31 PM Page 10

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario