LG AN-BL100 Manual de usuario
2
WIRELESS IR BLASTER
PART DECSRIPTION
IR BLASTER SETTING AND PAIRING
If you have the IR blaster installed, you can control the peripheral
devices connected to the TV with the LG TV remote app using the
Magic remote control or a smartphone.
PAIRING
OFF ON
On/Off
switch Pairing
Button
WARNING: This product contains chemicals known to the State of California
to cause cancer and birth defects or other reproductive harm.
Wash hands
after handling.
ENGLISH
OJ 83#fp
63#fp#0#:#p
78俋
LED
Indicator
3
1. Within 7 meters(22 Feet) from the TV, Press the pairing button
on the IR blaster for about 2 seconds
2. The LED indicator of the IR blaster turns on and the pairing
status is displayed on the TV screen.
* If the paring failure message appears, reboot the IR blaster
and press the pairing button again.
3. When pairing is complete, install the IR blaster within 50 cm (1.5
feet) of the external device(s) within 45 degrees of the of the IR
sensor.
* Do not place any obstacles that may interfere the reception
between the IR blaster and the IR receiver of the external
device.
4. Set the Universal Control using the Magic remote control.
[Input List Set the Universal Control]
* Press the pairing button for 5 seconds or more to restart the
pairing.
* Do not throw or roll the IR blaster.
ENGLISH
OPERATING ENVIROMENT
1. If multiple set-top boxes and media devices are used or the
media device is in a place where the IR signal from the remote
cannot be received, the IR blaster transmits the IR signals to the
external devices.
4
INSTALLING BATTERIES
1. Hold the top and bottom
cases together and turn the
top case counter-clockwise
to split them.
2. Press the label on the
battery cover to open it.
3. Insert new four Alkaline AA
batteries according to the
polarity symbols (+ and -)
marked and close
4. Align the top and bottom
cases and turn the top case
clockwise.
ENGLISH
2. When using the LG remote app on your smartphone, you can
control an external device through the IR blaster. (Only when
using the Universal Remote function)
(1) After replacement of the battery, use the IR blaster following
pairing in accordance with user manual.
(2) If the unit does not operate after replacement of battery, take
the battery out and reattempt pairing in accordance with the
user manual.
(3) If the IR blaster is not being used for a prolonged period of
time, it is recommendable you remove the battery from the
unit.
PRECAUTIONS
5
ENGLISH
(4) Do not dismantle or exert heat to the battery.
(5) Do not drop battery or exert extreme impact that may even
cause the case to be damaged.
(6) Do not immerse the battery in water.
(7) There is danger of explosion if the battery is inserted
reversely.
(8) Discard the used battery into designated location.
SPECIFICATIONS
Categories
Details
Model No. AN-BL100
Range of frequency 2.400 GHz - 2.4835 GHz
Channel 79 channels
Transmission output 10 dBm
Reception sensitivity -86 dBm
Dimensions 75 mm X 75 mm X 71.2 mm ± 1 mm
Weight 81.1 g ± 5 g
Power source AA 1.5 V,
4 alkaline batteries are used
Operational tem-
perature range 0
°
C - 60
°
C
Tabla de contenidos
Otros manuales de Accesorios de TV de LG
LG
LG AP-60DA60 Manual de usuario
LG
LG AN-VC200 Manual de usuario
LG
LG CodePlus PIVD100R Manual de usuario
LG
LG AP-HV400 Manual de usuario
LG
LG FMA-LG102 Manual de usuario
LG
LG RJP-110WBR Manual de usuario
LG
LG RJP-110S Manual de usuario
LG
LG RJP-101M Manual de usuario
LG
LG RJP-110F Manual de usuario
LG
LG 98UH5F Manual de usuario
LG
LG FMA-LG101 Manual de usuario
LG
LG SP520N Manual de usuario
LG
LG RJP-201M Manual de usuario
LG
LG AN-WL100W Manual de usuario
LG
LG FMA-LG101 Manual de usuario
LG
LG AN-WF100 Manual de usuario
LG
LG SP520 Manual de usuario
LG
LG FC22A9A Manual de usuario
LG
LG Zenith HCS5610 Guía de instalación
LG
LG AN-WF100 Manual de usuario
