LG Premium Magic Remote PM20GA Manual de operación
Premium Magic Remote
User
Information
Model Name : PM20GA
Table of Contents
1. Overview and specification of the remote control
(1) Overview
(2) Specification
2. Precautions
3. Customer Support
English
1. Overview and Specifications for the Remote Control
(1) Overview
- Instructions for using the Premium Magic Remote control are in the
TV manual.
this remote uses RF(Radio Frequency) instead of IR (InfaRed light).
this remote will operate within 10m of the tv and does
not require it be pointed at the tv.(voice recognition support)
(2) Specifications
"This device can be operated in at least one Member State without
infringing applicable requirements on the use of radio spectrum"
Categories Details
Model No. PM20GA
Range of frequency 2.400 GHz ~ 2.4835 GHz
Output Power(Max.) 7.5dBm
Channel 40 channels
Power source AAA 1.5 V,
2 alkaline batteries are used
Operational
temperature range 0 ℃ ~ 40 ℃
2. Precautions
(1) After replacement of the battery, use the remote control following pairing
in accordance with user manual.
(2) If the unit does not operate after replacement of battery, reattempt pairing
in accordance with the user manual.
(3) If the remote controller is not being used for prolonged period of time, it is
recommended you remove the battery from the unit.
(4) Do not dismantle or exert heat to the battery.
(5) Do not drop battery or exert extreme impact that may even cause the case
to be damaged.
(6) Do not immerse the battery in water.
(7) There is danger of explosion if a the battery is inserted reversely.
(8) Properly dispose of used batteries.
(9) Open the battery cover to find the label.
3. Customer Support
Refer to the contact number for services provided in the TV Manual.
Federal Communications Commission(FCC) Statement
Federal Communications Commission(FCC) Statement
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void
the user’s authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including
interference that may cause undesired operation of the
device.
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the
user’s authority to operate the equipment.
FCC Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate this equipment and For indoor use only, use outdoors or in
other modes not covered by this manual may violate the FCC
regulation and violate the user authority to use the product.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. End users
must follow the specific operating instructions for satisfying RF exposure
compliance.
Industry Canada Statement
[English]
Industry Canada Statement
(For Canada)
This device complies with Industry Canada’s licence-exempt RSS
Stadard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Avis d'industrie canada
Cet appareil est conforme aux normes CNR d’Industrie Canada
applicables aux dispositifs exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
IC Radiation Exposure Statement
(For Canada)
This equipment complies with IC radiation exposure limits set forth for an
Uncontrolled environment.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY
TO OPERATE THE EQUIPMENT.
[French]
Avis d'Industrie Canada
(Pour le Canada)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Avis d’Industrie Canada sur l’exposition aux rayonnements
Avis d'industrie canada
(Pour le Canada)
Cet appareil est conforme aux limites d’exposition aux rayonnements
d’Industrie Canada pour un environnement non contrôlé.
REMARQUE : LE FABRICANT N’EST PAS RESPONSABLE DES INTERFÉRENCES
RADIOÉLECTRIQUES CAUSÉES PAR DES MODIFICATIONS NON AUTORISÉES
APPORTÉES À CET APPAREIL. DE TELLES MODIFICATIONS POURRAIENT
ANNULER L’AUTORISATION ACCORDÉE À L’UTILISATEUR DE FAIRE
FONCTIONNER L’APPAREIL.
CE Statement
1) Certification Marking
[ENGLISH]
Hereby, LG Electronics declares that the radio equipment type
[Magic Remote] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
LG Electronics European Shared Service Center B.V.
Krijgsman 1
1186 DM Amstelveen
The Netherlands
Wireless function S/W Version: 1.0.329.13
H/W Version: PNCFA1431B
Tabla de contenidos
Otros manuales de Mando a distancia de LG
LG
LG Magic Remote AN-MR400P Manual de operación
LG
LG PQRCVSL0 Guía de inicio rápido
LG
LG Magic Remote Manual de operación
LG
LG AN-SP700 Manual de operación
LG
LG Magic Remote MR23GN Manual de usuario
LG
LG V-NET ACS PREMTA000B Manual de instrucciones
LG
LG PQRCUDS0 Guía de inicio rápido
LG
LG PQRCUSA1 Guía de inicio rápido
LG
LG PQRCUCA0 Guía de inicio rápido
LG
LG PREMTB001 Guía de inicio rápido
LG
LG AN-MR300 Manual de usuario
LG
LG EM9600 Manual de usuario
LG
LG MR20GA Manual de usuario
LG
LG Magic Remote Manual de usuario
LG
LG Magic Remote Manual del propietario
LG
LG AN-MR600 Manual de usuario
LG
LG Smart AC Manual de usuario
LG
LG PQRCUCS0C Guía de inicio rápido
LG
LG PREMTW101 Guía de inicio rápido
LG
LG AN-MR600 Manual de operación
