LG RL-JA10 Manual de usuario
RL-JA10
OWNER’S MANUAL
LG LCD PROJECTORLG LCD PROJECTOR
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the bottom of the set and
quote this information to your dealer when you
require service.
Model number :
Serial number :
LCD
PROJECTOR
LCD
PROJECTOR
1
FCC NOTICE
• A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CONTENTS
INDEX
INTRO-
DUCTION
1Safety Instructions 3
Names of parts 7
INSTALLATION AND
COMPOSITION
2Installation Instructions 13
Composition 15
Turning on the Projector 17
Turning off the Projector 18
Operating the Projector 19
Selecting source mode 20
CONNECTIONBASIC FUN-
CTIONS
3
Function checking 32
Using Still function 33
4
Connecting to a Desktop PC 21
Connecting to a Notebook PC 22
Connecting to a Macintosh Desktop PC
23
Connecting to a Macintosh PowerBook
26
Connecting to a wireless trasmitter(TW-AV10T)
27
Connecting to a wireless receiver(TW-AV10R)
28
Connecting to a Video Source 29
Connecting to a DVD 30
Connecting to a D-TV Settop Box 31
SPECIAL
FUNCTIONS
5Selecting language 34
Using Flip Horizontal / Vertical function
35
Using Blank function 37
Checking lamp time 38
Selecting PC screen size input signal
39
POSI-
TIONING
6
Using Tracking function 43
TRACK-
ING
VIDEO /
AUDIO
7
Using Resize function 40
Adjusting screen display 41
Adjusting Video 45
Adjusting Audio 47
8
INFORMA-
TION
9Supported Monitor Display 48
Maintenance 49
Specifications 50
2
Before operating the
unit, please read this
manual carefully.
3
Safety Instructions
GAlways keep the safety instructions to prevent any potential accident or misuse of the projector.
✶The meanings of symbols in the manual and the unit are as below.
G Take care of danger that may happen under specific condition.
G Take care of electric shock that may happen under specific condition.
G After reading this manual, keep it in the place that the user always can contact easily.
GSafety Instructions have two kinds of information, and each meaning of it is as below.
WARNING The violation of this instruction may cause serious injuries and even death.
NOTES The violation of this instruction may cause light injuries or damage of the projector.
WARNING
Do not attempt to repair or adjust this
equipment. Contact your dealer or Service
center. High risk of electric shock!
Don’t insert any object into the exhaust vent .
This may cause a fire or could give
an electric shock.
Earth wire should be connected.
- If the earth wire is not connected, there is possible a
danger of electric shock caused by the current leakage.
- If grounding methods are not possible, a separate cir-
cuit breaker should be employed and installed by a
qualified electrician.
- Do not connect ground
to telephone wires,
lightning rods or
gas pipe.
Short-circuit
breaker
Power
Do not place anything containing liquid on
top of the projector. High risk of Electric
Shock or damage to the projector.
This may cause a fire
or could give an
electric shock.
WARNING
Don’t remove any covers (except lens
cover). High risk of Electric Shock! Use an air spray or soft cloth that is wet
with a neutral detergent and water for
removing dust or stains on the projection
lens.
Don’t look directly onto the lens when the
projector is in use. Eye damage may occur!
Don’t use the projector in damp place such
as a bathroom or any place where it is like-
ly to get wet. Serious damage could occur
or risk of Electric Shock!
Don’t use the projector if there is smoke
or unusual smell from the projector.
Disconnect from the mains and contact
the service center. Risk of fire!
Leave an adequate distance(30cm or more)
around the projector.
To cooling the lamp, leave the projector
plugged in for at least 3 minutes after
switching off the procector. if not, it cause
shortening of projector life.
4
INTRODUCTION
AC
K
P
R
P
B
Y
RGB(DC/DTV) RS-232C
DC
AC
K
P
R
P
B
Y
RGB(DC/DTV) RS-232C
DC
Don’t clog the opening(absorption tube/ex-
haust pipe) of the projector.
It makes internal temperature increase and caus-
es a fire.
absorption tube exhaust pipe
5
Safety Instructions
NOTES
Only use the projector on a level and sta-
ble surface.
It may fall down
or be upset.
Be sure to unplug when you don’t use
the projector for a long period or you are
absent.
Accumulated dust may
cause a fire,
electric shock from
deterioration,
or electric leakage.
No contact while working, or right after the
lamp is off since the exhaust port and the
lamp lid generate heat.
Disconnect from the mains and remove all
connections before moving.
Damage of cords may cause
a fire or electric shock.
Never touch the power plug with wet hand.
It may cause electric shock.
Don’t use alcohol, benzene, or thinners to
clean any plastic parts of the projector.
Never use industrial chemicals or deter-
gents.
Ensure the power lead doesn’t trail across
any hot objects like a heater.
It may cause a fire
or electric shock.
Hold the plug tightly when unplugging.
If you hold the cord when unplugging , the internal
line of the cord may be cut. This may cause heat-
ing and fire.
NOTES
Don’t touch the lens of the projector. It may
cause damage of it. Don’t use any sharp tools on the projector
as this will damage the casing.
If the projector requires cleaning inside con-
tact the service centre. Accumulated dust
can cause mechanical failure.
Place the projector where people will not
trip or tread on the power lead.
Use the indicated type of power source on
the projector. If you are not sure of the type
of power available, consult your dealer or
customer service center.
Don’t place the projector or the remote
control on a heater or use in a heated car.
Don’t use the projector when the power
cord or the plug is damaged or the con-
necting part of wall socket is loose.
It may cause electric shock
or a fire.
Contact your dealer for replacing a new
lamp.
6
INTRODUCTION
7
Names of parts
AC
K
Audio
RGB(PC Input) RS-232C
Component(DVD/DTV Input)
P
R
P
B
Y
R
RAudio
Audio
L
L/Mono
Video
RAudio
L/Mono
Video
S-Video
Video 1
DC Out
(12V/0.5A)
Video2
Main Body
Main Body
Rear Connecting Part
Rear Connecting Part
Foot adjuster
lever
Foot adjuster
lever
Indicators
Front remote
control sensor
Focus ring Lens cover
Foot
Foot
RGB(PC Input) RS-232C
(Program Download)
DC Out(12V/0.5A)
Component(DVD/DTV Input)
Audio
Kensington Security
System Connector
(Refer to page 16)
Rear remote control sensor
Video1/Video2/S-Video
Zoom ring
Power button
Control panel
*
The LCD projector is manufactured using high-precision technology. You may, however, see tiny black points
and/or bright points(red, blue, or green) that continuously appear on the LCD projector. This is a normal result
of the manufacturing process and does not indicate a malfunction.
Control Panel
Control Panel
MENU
SOURCE PATTERN
ENTER
VOL VOL
POWER
POWER Button
Indicators D, EButton
Selects menus and
items in the menus.
MENU Button
Selects or closes menus.
SOURCE Button
Switches to RGB, Video 1, Video 2,
S-Video, Component mode.
VOLUME F, GButton
Adjusts volume level and
functions of menus.
ENTER AButton
Checks present mode and
saves the change of functions.
PATTERN Button
When pressing PATTERN
button, the screen display’s
the screen for focus adjust-
ment.
8
INTRODUCTION
9
Names of parts
MENU
SOURCE
ENTER
PLAY FWD
TRACKING
AUTO RESIZE STILL ZOOM
BLANK APC MUTE VOL VOL
POWER
PROJECTOR
VIDEO DVD
RECORD STOP SKIP SKIP
OPEN/CLOSE
PAUSE REW
. .
Remote Control
Remote Control
POWER Button
Button to select
desired product
VCR Buttons
RESIZE Button(Refer to p.40)
AUTO TRACKING Button
(Refer to p.43)
BLANK Button(Refer to p.37)
MENU Button
APC Button(Refer to p.46)
(D, E, F, G) Button
ENTER(A) Button
ZOOM Button(Refer to p.42)
STILL Button(Refer to p.33)
Indicator of product choice button
VOLUME -, + Button
MUTE Button
*Switches the sound on or off.
SOURCE Button(Refer to p.20)
Otros manuales para RL-JA10
1
Tabla de contenidos
Otros manuales de Proyector de LG
LG
LG RL-JA20 Manual de usuario
LG
LG HW300G Manual de instalación y operación
LG
LG RD-JT91 Manual de usuario
LG
LG PB63U Manual de usuario
LG
LG PF50KA Manual de usuario
LG
LG AN110B-JD Manual de usuario
LG
LG CineBeam Laser 4K Manual de usuario
LG
LG BS275 Manual de instalación y operación
LG
LG BX503B Manual de usuario
LG
LG HW300T Manual de usuario
LG
LG BX503 Manual de usuario
LG
LG CineBeam HF60LA Manual de usuario
LG
LG CineBeam HF65LA Manual de usuario
LG
LG MiniBeam PF1500W Manual de usuario
LG
LG HF85JG Manual de usuario
LG
LG ProBeam UST HF85JA Manual de usuario
LG
LG CineBeam Laser 4K Manual de usuario
LG
LG LP-XG22 Manual de usuario
LG
LG PB60G Manual de usuario
LG
LG PB63U.AUS Manual de usuario
