LG LP62 Manual de usuario
OWNER’S MANUAL
LED TV*
Please read this manual carefully before operating
your set and retain it for future reference.
LN54**
LP36**
LP62**
* Disclaimer
LG LED TV applies LCD screen with LED backlights.
www.lg.com
2
ENG
ENGLISH
TABLE OF CONTENTS
WARNING
yIf you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.
CAUTION
yIf you ignore the caution message, you may be
slightly injured or the product may be damaged.
NOTE
yThe note helps you understand and use the
product safely. Please read the note carefully
before using the product.
TABLE OF CONTENTS
3 INSTALLATION PROCEDURE
3 ASSEMBLING AND PREPARING
3 Unpacking
6 Separate purchase
7 Parts and buttons
8 Lifting and moving the TV
9 Setting up the TV
9 - Attaching the stand
9 Mounting on a table
12 Mounting on a wall
13 Tidying cables
13 MAKING CONNECTIONS
14 Antenna connection
14 HDMI connection
15 DVI to HDMI connection
15 Component connection
16 Composite connection
16 RGB-PC connection
17 Audio connection
17 - Digital optical audio connection
17 External speaker out
18 Speaker output setup
18 - Volume control port
18 Network Connection
18 - Connecting to a Wired Network
19 - Wireless network connection
19 Headphone connection
20 USB connection
21 REMOTE CONTROL
23 MAINTENANCE
23 Cleaning your TV
23 - Screen, frame, cabinet and stand
23 - Power cord
23 TROUBLESHOOTING
24 CAUTION FOR USING EZSIGN
25 SPECIFICATIONS
28 LICENSES
28 OPEN SOURCE SOFTWARE NOTICE
29 IR CODES
30 EXTERNAL CONTROL DEVICE
SETUP
30 RS-232C Setup
30 Type of connector; D-Sub 9-Pin Male
30 RS-232C Configurations
31 Communication Parameters
31 Command reference list
32 Transmission / Receiving Protocol
3
ENGENGLISH
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
NOTE
yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you are using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned
off if it will not be watched for some time, as this will reduce energy consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced,
and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available. You can use the TV network functions only when the network
connection is made. (Only LP62**)
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you
purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yDo not use any unapproved items to ensure the safety and product life span.
yAny damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
ySome models have a thin film attached on to the screen and this must not be removed.
WARNING
yYou need to enable easy access for connecting and disconnecting electric cables fed from the mains.
NOTE
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product
functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm
width. Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not fit into your
TV’s USB port.
A
B
A
B
*A
<
=
10 mm
*B
<
=
18 mm
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
Remote control and
batteries (AAA)
(See p.21, 22)
Owner’s manual Cable holder
(Depending on model)
(See p.13)
Power Cord
(Depending on model)
Stand Screws
3EA, M5 x 25
4EA, M4 x 14
(Only 60LN54**,
42LN549D)
(See p.9)
Stand Screws
7EA, M4 x 14
(Only
32/42/47/55LN549C,
32/42/47/55LN549E,
LP36**, LP62**)
(See p.9)
Desk-mount Screw
(See p.10)
Power cable holder/
bolt
(See p.13)
or
Stand Body / Stand
Base
(See p.9)
Isolator
(Depending on model)
(See p.5)
EzSign Editor CD
(Only LN549E)
5
ENGENGLISH
ASSEMBLING AND PREPARING
NOTE
yAntenna Isolator Installation Guide
- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.
»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be
heated and excessive heat might cause an accident.
- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is
recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid
disconnecting the antenna Isolator after installation.
- Before starting, be sure that the TV antenna is connected.
ANTENNA/
CABLE IN
Cable / Antenna
Wall
Isolator
1. Connect to TV.
2. Connect to Set-Top box.
or
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a cable
distribution system using coaxial cable, may in some circumstances create a re hazard. Connection to
a cable distribution system has therefore to be provided through a device providing electrical isolation
below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
LG Audio device Wireless Dongle
AN-WF100
Compatibility LN549C, LN549D, LP36**,
LP62** LN549E
LG Audio device • •
Wireless Dongle
AN-WF100 •
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s
circumstances or policies.
7
ENGENGLISH
ASSEMBLING AND PREPARING
Parts and buttons
Button Description
H
Scrolls through the saved programmes.
H
Adjusts the volume level.
H
Selects the highlighted menu option or confirms an input.
SAccesses the main menu, or saves your input and exits the menus.
H
Changes the input source.
Turns the power on or off.
SETTINGS
INPUT
OK
Buttons
Screen
Remote control sensor
Power indicator
Speakers
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Lifting and moving the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
CAUTION
yAvoid touching the screen at all times, as this may
result in damage to the screen.
yIt is recommended to move the TV in the box or
packing material that the TV originally came in.
yBefore moving or lifting the TV, disconnect the
power cord and all cables.
yWhen holding the TV, the screen should face
away from you to avoid damage.
yHold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yWhen transporting a large TV, there should be at
least 2 people.
yWhen transporting the TV by hand, hold the TV as
shown in the following illustration.
yWhen transporting the TV, do not expose the TV
to jolts or excessive vibration.
yWhen transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the left
or right.
yDo not apply excessive pressure to cause flexing
/bending of frame chassis as it may damage
screen.
9
ENGENGLISH
ASSEMBLING AND PREPARING
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
2
3
1
Stand Base
M4 x 14
4EA
M4 x 14
3EA
Only
32/42/47/55LN549C,
32/42/47/55LN549E,
LP36**, LP62**
Only
60LN54**,42LN549D
M5 x 25
3EA
Stand Body
CAUTION
yWhen attaching the stand to the TV set, place the
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
yMake sure that the screws are inserted correctly
and fastened securely. (If they are not fastened
securely enough, the TV may tilt forward after
being installed.)
Do not use too much force and over tighten the
screws; otherwise screw may be damaged and
not tighten correctly.
NOTE
yRemove the stand before installing the TV on a
wall mount by performing the stand attachment in
reverse.
Mounting on a table
1 Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yDo not place the TV near or on sources of heat,
as this may result in fire or other damage.
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Attaching the TV to a table
(Only 39/42/47LN549C, 39/42/47LN549E, 42/47LP36**,
42/47/55LP62**)
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
(not provided as parts of the product)
4-Screws
Stand
Table
Screws: M5 x L (*L: Table depth + 8-10 mm)
ex) Table depth: 15mm, Screw: M5 x 25
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
WARNING
yTo prevent TV from falling over, the TV should be
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV
may cause injury.
Adjusting the angle of the TV to suit view
(Only 32LN54**, 32LP36**, 32LP62**)
Swivel 15 degrees to the left or right and adjust the angle
of the TV to suit your view.
90˚ 90˚
15˚ 15˚
(Only 39/42/47/55LN549C, 39/42/47/55LN549E,
42/47LP36**, 42/47/55LP62**)
Swivel 90 degrees to the left or right and adjust the angle
of the TV to suit your view.
90˚ 90˚
15˚ 15˚
CAUTION
yWhen adjusting the angle of the product, watch
out for your fingers.
»
»Personal injury may occur if hands or fingers are
pinched. If the product is tilted too much, it may fall,
causing damage or injury.
Este manual sirve para los siguientes modelos
14
Tabla de contenidos
Otros manuales de Televisor OLED de LG
LG
LG OLED65G1RLA Manual de usuario
LG
LG OLED55B6V-T Manual de lista de piezas
LG
LG OLED65B1PVA.AFKG Manual de usuario
LG
LG 15EL9500 Manual de usuario
LG
LG 43UN570H0UA Manual de usuario
LG
LG 75UR781C0SB Manual de usuario
LG
LG 55EG9600 Manual de usuario
LG
LG OLED65E9PSA Manual de usuario
LG
LG OLED55C6P Manual de usuario
LG
LG 55EA9700 Manual de usuario
LG
LG OLED55C7 Series Manual de usuario
LG
LG OLED55G3PUA Manual de usuario
LG
LG 55EG9600-CA Manual de usuario
LG
LG 65SK9550PUA Manual de lista de piezas
LG
LG OLED55B8PUA Manual de usuario
LG
LG OLED77ZX9LA.AEK Manual de usuario
LG
LG OLED97G2CUA Manual de usuario
LG
LG 65ET961H Manual de usuario
LG
LG 55EG9600-UA Manual de usuario
LG
LG 75UN8100PTB.AAU Manual de usuario
