LG FLATRON L3000A Manual de usuario
APPENDIX G :
FCC ID : BEJL3000A
USER’S MANUAL
A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential e shock or fire hazards.
In order to allow the proper operation of all safeguards incorporated in this
display, observe the following basic rules for its installation, use, and
servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display.
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Important Precautions
A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
2. Connect the power cord into a proper power outlet that is easily accessible and
close to the display.
3. Connect the audio cable to the *LINE OUT jack of the PC sound card.
PC PC
Speaker including a built-in
amplifier(Amp) -Optional
MAC
Bottom
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that
the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of
PC sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to
Line Out using the card jumper of the program (Refer to the Sound Card Manual).
A6
Control Panel Functions
Front Panel Controls
Buttons
Use these buttons to choose or adjust items in
the On Screen Display.
MENU Button
Use this button to enter or exit the On Screen
Display.
Use this button to turn the display on or off.
This Indicator lights up green when the display
operates normally. If the display is in DPM (Energy
Saving) mode, this indicator color changes to amber.
Power Button
Power (DPMS)
Indicator
Use this button to enter a selection in the On Screen
Display.
AUTO/SELECT
Button
Remote Control Sensor
Power On/Off switch
Control Function
Bottom
A7
Control Panel Functions
Control Direct Access Function
•
Bring up Contrast and Brightness adjustment.
100
100
37
AUTO IN PROGRESS
When adjusting your display settings, always press the
AUTO/SELECT button before entering the On Screen
Display(OSD). This will automatically adjust your display
image to the ideal settings for the current screen
resolution size (display mode).
This function allows you to secure the current control settings,
so that they cannot be inadvertently changed. Press and hold
the MENU button and button for 3 seconds: the message
“CONTROLS LOCKED” appears.
You can unlock the OSD controls at any time by pushing the
MENU button and button for 3 seconds:
the message “CONTROLS UNLOCKED” will appear.
AUTO adjustment function
CONTROLS LOCKED/UNLOCKED :
MENU and
INPUT SELECT
DVI DIGITAL
DSUB ANALOG
V1 (AV)
V2 (S)
HDTV
Use this button to select an input signal.
• DVI DIGITAL: DVI digital signal
• DSUB ANALOG: 15-pin D-sub analog signal
• V1 (AV): Composite video
• V2 (S): S video
• HDTV: HDTV
Source Selection:
CONTROLS LOCKED
CONTROLS UNLOCKED
AUTO/SELECTSOURCE
Use these buttons to decrease or increase the volume level.
VOLUME:
A8
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the or Buttons. When the icon you want
becomes highlighted, press the AUTO/ SELECT Button.
Use the Buttons to adjust the item to the desired level.
Accept the changes by pressing the AUTO/SELECT Button.
Exit the OSD by Pressing the MENU Button.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
AUTO/SELECT
AUTO/SELECT
MENU
MENU
A9
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
NOTE
The order of icons may differ depending on the model (A11~A16).
To adjust the brightness and
contrast of the screen
BRIGHTNESS
CONTRAST
COLOR
ADJUSTMENT
IMAGE
POSITION
TRACKING
SETUP
PIP
Main menu Sub menu A D Reference
PRESET
9300K
6500K
R/G/B(User Color)
To adjust the position of the
screen
To customize the color of the
screen
To customize the screen status
for a user's operating environment
To improve the clarity and
stability of the screen
: Adjustable A : Analog Input D : Digital Input
BRIGHTNESS
CONTRAST
V POSITION
H POSITION
AUTO
CLOCK
PHASE
LANGUAGE
IMAGE SIZE
OSD POSITION
TRANSPARENCY
ZOOM
To adjust the PIP of the screen
PIP ON/OFF
PIP SOURCE
PIP SIZE
PIP POSITION
PIP IMAGE
PIP SOUND
Using the computer
A10
On Screen Display(OSD) Selection and Adjustment
ADJUSTMENT
AUDIO
SETUP
Main menu Sub menu Reference
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
To customize the screen status
for a user's operating environment
To improve the clarity and
stability of the screen
LANGUAGE
IMAGE SIZE
OSD POSITION
TRANSPARENCY
To adjust the audio function
VOLUME
BASS
TREBLE
MUTE
SOUND
Using the VCR/DVD/HDTV
: Adjustable
A11
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
OSD Adjust Description
BRIGHTNESS
To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
To adjust the brightness and contrast of the screen
CONTRAST/BRIGHTNESS
CONTRAST 100
BRIGHTNESS 99
RGB
PIP
COLOR ADJUSTMENT
USER 9300K 6500K
RGB
PIP
RED 50
50
50
GREEN
BLUE
USER
9300K
6500K
RED/GREEN/BLUE
Set your own color levels.
Select the screen color.
• 9300K: Slightly bluish white.
• 6500K: Slightly reddish white.
To customize the color of the screen
OSD Adjust Description
To adjust the screen when using the computer
Otros manuales para FLATRON L3000A
1
Tabla de contenidos
Idiomas:
Otros manuales de Monitor de LG
LG
LG L1917S-SNN Manual de usuario
LG
LG E2050S Manual de usuario
LG
LG 49WL900G Manual de usuario
LG
LG MT-42PZ10 Manual de usuario
LG
LG 27HK510S-W.AEU Manual de usuario
LG
LG E2210T Manual de usuario
LG
LG 32MA70HY Manual de usuario
LG
LG EB2242T Manual de usuario
LG
LG 19HK312C-B Manual de usuario
LG
LG L1953H Manual de usuario
LG
LG 27MP68VQ Manual de usuario
LG
LG 27MB85Z Manual de usuario
LG
LG FLATRON F700B Manual de usuario
LG
LG E1960S Manual de usuario
LG
LG 24BP750C Manual de usuario
LG
LG 43SQ700S Manual de usuario
LG
LG C19JE Manual de usuario
LG
LG 49WL95C-WE Manual de usuario
LG
LG 24MB35PU Manual de usuario
LG
LG 32UD60-B Manual de usuario
