LG 29UM57-P.AUS Manual de usuario
www.lg.com
25UM57
29UM57
Please read the safety information carefully before using the
product.
IPS LED Monitor (LED Monitor) Model List
Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
2
ENG
ENGLISH
Contents
CONTENTS
21 CUSTOMIZING SETTINGS
21 Activating the Main Menu
22 Customizing settings
22 - Menu Settings
22 - -Quick Settings
23 - -Picture
25 - -General
26 - -Reset
27 - -Game mode
29 TROUBLESHOOTING
31 SPECIFICATIONS
31 25UM57
32 29UM57
33 Factory support mode
33 HDMI Timing (Video)
33 Power Indicator
34 PROPER POSTURE
34 Proper Posture for Using the Monitor
3LICENSE
4ASSEMBLING AND
PREPARING
4Product Components
5Component and Button Description
6Moving and Lifting the Monitor
7Installing the Monitor
7- Assembling the stand base
8- Using the cable holder
9- Detaching the stand base
11 - Installing onto a table
12 - Adjusting the angle
13 - Using the Kensington lock
13 - Installing the wall mount plate
14 - Installing to a wall
15 USING THE MONITOR
15 Connecting to a PC
15 - HDMI connection
15 Connecting to AV Devices
15 - HDMI connection
16 Connecting to External Devices
16 - Headphone port connection
17 INSTALLING THE LG
MONITOR SOFTWARE
17 Installing The Screen Split
19 Installing The Dual Controller
3
ENG
ENGLISH
LICENSE
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet
the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Product Components
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
yAlways use genuine components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of counterfeit components.
yNote that the components may look different from those shown here.
yWithout prior notice, all information and specifications in this manual are subject to change to im-
prove the performance of the product.
yTo purchase optional accessories, visit an electronics store or online shopping site or contact the
retail store where you purchased the product.
CAUTION
NOTE
User Manual/Card
Stand Base Stand Body Screw Cover Screws
HDMI Cable
Stand Base Stand Body Screw Cover Screws
( Depending on the country ) ( Depending on
the country )
Power Cord AC-DC Adapter AC-DC Adapter
or
5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Component and Button Description
Power Indicator
yOn: power is on
yOff: power is off
Ports
(Power Button)
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
yAs far as possible, avoid touching the moni-
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
yIt is advisable to place the monitor in the
original box or packing material before at-
tempting to move it.
yBefore moving or lifting the monitor, discon-
nect the power cord and all cables.
yHold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
yWhen holding the monitor, the screen should
face away from you to prevent it being
scratched.
yWhen moving the monitor, avoid any strong
shock or vibrations to the product.
yWhen moving the monitor, keep it upright,
never turn the monitor on its side or tilt it
sideways.
CAUTION
yIf you use the monitor panel without the
stand base, its joystick button may cause
the monitor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Installing the Monitor
Assembling the stand base
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
2Check the direction of the stand body
(front, back) and then mount the stand body
onto the stand hinge.
Tighten two screws into the back of the stand
body .
1Place the screen face down.
3
4Attach the screw cover.
Stand Body
Stand Body
Stand Base
Stand Hinge
Attach the Stand Base to Stand Body.
Tighten the screw to the right.
1
2
Screws
Screw Cover
25UM57
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
2Check the direction of the stand body
(front, back) and then mount the stand body
onto the stand hinge.
Tighten two screws into the back of the stand
body .
1Place the screen face down.
Applying excessive force when tightening
the screws may cause damage to the moni-
tor. Damage caused in this way will not be
covered by the product warranty.
CAUTION
3
4Attach the screw cover.
It may hurt your foot off the stand, so be
careful.
CAUTION
Stand Body
Stand Body
Stand Base
Stand Hinge
Attach the Stand Base to Stand Body.
Tighten the screw to the right.
1
2
Screws
Screw Cover
29UM57
Using the cable holder
9
ENG
ENGLISH
ASSEMBLING AND PREPARING
Detaching the stand base
2Remove the screw cover.
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
1Place the screen face down.
25UM57
3Remove the two screws on the back of stand
body.
As shown in the illustration, disconnect the
stand body from the stand hinge.
Screw cover
Stand Body
Stand Base
Turn the screw to the left.
Pull out the Stand Base.
41
2
Screws
Stand Body
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Monitor de LG
LG
LG L194WS-BF Manual de usuario
LG
LG L226WTQ-SF Guía de inicio rápido
LG
LG 22MP56HQ Manual de usuario
LG
LG Flatron L226WTM-SFQ.A**GQF Manual de usuario
LG
LG L1734S Manual de usuario
LG
LG 24BK4 series Manual de usuario
LG
LG M5500C-BA - - 55" LCD Flat Panel Display Manual de usuario
LG
LG FLATRON LCD 577LH Manual de usuario
LG
LG D2343P Manual de usuario
LG
LG IPS206T-PN Manual de usuario
LG
LG MU-50PZ41A Manual de usuario
LG
LG N224WHA Manual de usuario
LG
LG Flatron L1750H Manual de usuario
LG
LG MFL67652408 Manual de usuario
LG
LG 32MN510M Manual de usuario
LG
LG L196WTG Manual de usuario
LG
LG L177WSBS Manual de usuario
LG
LG 34WK95C-W.AUS Manual de usuario
LG
LG L1915S - - 19" LCD Monitor Manual de usuario
LG
LG UltraGear 27GL83A Manual de usuario
