LG 27UK650 Manual de usuario
www.lg.com
Please read the safety information carefully before using the product.
IPS LED Monitor (LED Monitor) Model List
Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
27UK650
27UK600
ENG
ENGLISH
2
CONTENTS
20 USER SETTINGS
20 Activating the Main Menu
20 - Main Menu Features
21 User Settings
21 - Menu Settings
26 TROUBLESHOOTING
28 SPECIFICATIONS
28 27UK650
29 27UK600
30 Factory Support Mode (Preset Mode, PC)
30 HDMI
30 DisplayPort
31 HDMI Timing (Video)
31 Power LED
3LICENSE
4ASSEMBLING AND PREPARING
4 Product Components
5 Supported Drivers and Software
6 Component and Button Description
6 - How to Use the Joystick Button
7 Input Connector
8 Moving and Lifting the Monitor
9 Installing the Monitor
9 - Assembling the stand base
10 Installing the Monitor
10 - Assembling the stand base
11 - Using the cable holder
12 - Installing onto a table
12 - Adjusting the angle
13 - Adjusting the Stand Height
14 - Pivot Feature
15 - Using the Kensington lock
16 - Installing the wall mount plate
16 - Installing to a wall
18 USING THE MONITOR
18 Connecting to a PC
18 - HDMI connection
18 - DisplayPort connection
19 Connecting to AV Devices
19 - HDMI connection
19 Connecting to External Devices
19 - Connecting Headphones
3
ENG
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP
Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for
dual-mode source devices are all registered trademarks of the Video Electronics Stan-
dards Association.
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
Product Components
Please check whether all the components are included in the box before using the product. If there are missing com-
ponents, contact the retail store where you purchased the product. Note that the product and components may look
different from those shown here.
yAlways use genuine components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of counterfeit components.
yIt is recommend that use the supplied components.
yIf you use generic cables not certified by LG, the screen may not display or there may be image noises.
yNote that the components may look different from those shown here.
yWithout prior notice, all information and specifications in this manual are subject to change to improve the
performance of the product.
yTo purchase optional accessories, visit an electronics store or online shopping site or contact the retail store
where you purchased the product.
CAUTION
NOTE
CD(Owner's Manual) /
Card
DisplayPort Cable
( Depending on the country )
HDMI Cable
( Depending on the country )
( Depending on the country ) ( Depending on the country )
Power Cord AC-DC Adapter
or
AC-DC Adapter
27UK600
27UK650
27UK600
27UK650
27UK600
27UK650
27UK600
27UK650
Stand Body Stand Base Cable Holder
27UK600
27UK650
27UK600
27UK650
27UK600
27UK650
27UK600
27UK650
27UK600
27UK650
Stand Body Stand Base Screw Cover 2 Screws
6
ENG
ENGLISH
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your
finger.
Basic Functions
Power on Press the joystick button once with your finger to turn on the
monitor.
Power off Press and hold the joystick button once with your finger to turn off the
monitor.
◄/►Volume
Control You can control the volume by moving the joystick button left/right.
Component and Button Description
Power LED
yOn: power is on
yOff: power is off
Joystick Button
yThe joystick button is located at the bottom of the monitor.
NOTE
27UK650 27UK600
7
ENG
ENGLISH
Input Connector
27UK650 27UK600
8
ENG
ENGLISH
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these in-
structions to prevent the monitor from being scratched
or damaged and to ensure safe transportation regard-
less of its shape or size.
yAs far as possible, avoid touching the monitor
screen. This may result in damage to the screen or
some of the pixels used to create images.
yIt is advisable to place the monitor in the original
box or packing material before attempting to
move it.
yBefore moving or lifting the monitor, disconnect
the power cord and all cables.
yHold the top and bottom of the monitor frame
firmly. Do not hold the screen itself.
yWhen holding the monitor, the screen should face
away from you to prevent it being scratched.
yWhen moving the monitor, avoid any strong shock
or vibrations to the product.
yWhen moving the monitor, keep it upright, never
turn the monitor on its side or tilt it sideways.
CAUTION
yIf you use the monitor panel without the stand
base, its joystick button may cause the monitor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
27UK600
27UK650
27UK600
27UK650
9
ENG
ENGLISH
Installing the Monitor
Assembling the stand base
yTo avoid injury to the fingers and foot when
Assembly Stand Body and Base, should hold
Base when assembly stand body and base.
yPress the stand until the button reaches the top.
1Please put a soft cloth on a low table or box to
protect the screen of the monitor.
Please put the monitor on the soft cloth with the
screen facing down.
3Turn the screw clockwise to secure the stand base.
21
2
Assemble the Head and Stand body.
1 2
Assemble the Stand body and Stand base .
CAUTION
NOTE
27UK650
Stand Body
Stand Base
Stand Body
Cable Holder
10
ENG
ENGLISH
1Place the screen face down.
27UK600
Installing the Monitor
Assembling the stand base
yTo protect the screen from scratches, cover the
surface with a soft cloth.
CAUTION
2Check the direction of the stand body (front, back)
and then mount the stand body onto the stand
hinge.
3Attach the Stand Base to Stand Body.
Tighten the screw to the right.
1
2
4Attach the screw cover.
Stand Body
Stand Base
Applying excessive force when tightening the screws
may cause damage to the monitor. Damage caused in
this way will not be covered by the product warranty.
CAUTION
It may hurt your foot off the stand, so be careful.
CAUTION
yYou can disassemble the stand in the reverse order
of the assembly.
NOTE
Stand Body
Screw Cover
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Monitor de LG
LG
LG 34CB88 Manual de usuario
LG
LG 34WP580 Manual de usuario
LG
LG 42LG60 Series Manual de usuario
LG
LG 27BL650C Manual de usuario
LG
LG 910B Manual de usuario
LG
LG 32QK500-C Manual de usuario
LG
LG UltraGear 32GN600 Manual de usuario
LG
LG StudioWorks 563N Manual de usuario
LG
LG Flatron M228WA Manual de usuario
LG
LG 34UM64 Manual de usuario
LG
LG L2000CP Manual de usuario
LG
LG M2901S Manual
LG
LG L227WGP Manual de usuario
LG
LG 29UC97 Manual de usuario
LG
LG 35WN65C-B.AUS Manual de usuario
LG
LG 27UP850 Manual de usuario
LG
LG 34WQ68X Manual de usuario
LG
LG M4210N Guía de inicio rápido
LG
LG E1942C-BN Manual de usuario
LG
LG 42WS10-BAAL Manual de usuario
