LG 25UM58 Manual de usuario
www.lg.com
25UM58
29UM58
34UM58
Please read the safety information carefully before using the product.
IPS LED Monitor (LED Monitor) Model List
*Disclaimer: LG LED Monitor applies LCD screen with LED backlights.
This product is a computer monitor and not for television purpose.
OWNER’S MANUAL
IPS LED COMPUTER
MONITOR
(LED COMPUTER
MONITOR*)
2
ENG
ENGLISH
Contents
CONTENTS
23 - -Picture mode
24 TROUBLESHOOTING
26 SPECIFICATIONS
26 25UM58
27 29UM58
28 34UM58
29 Factory support mode
29 HDMI Timing (Video)
29 Power Indicator
30 PROPER POSTURE
30 Proper Posture for Using the Monitor
3LICENSE
4ASSEMBLING AND
PREPARING
4Product Components
5Component and Button Description
6Moving and Lifting the Monitor
7Installing the Monitor
7- Assembling the stand base
8- Using the cable holder
9- Detaching the stand base
11 - Installing onto a table
12 - Adjusting the angle
13 - Using the Kensington lock
13 - Installing the wall mount plate
14 - Installing to a wall
15 USING THE MONITOR
15 Connecting to a PC
15 - HDMI connection
16 Connecting to External Devices
16 - Connecting Headphones
17 CUSTOMIZING SETTINGS
17 Activating the Main Menu
18 Customizing settings
18 - Menu Settings
18 - -Quick Settings
19 - -Picture
21 - -General
22 - -Reset
3
ENG
ENGLISH
LICENSE
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet
the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing Ad-
ministrator, Inc.
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Product Components
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
yAlways use genuine components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of counterfeit components.
yNote that the components may look different from those shown here.
yWithout prior notice, all information and specifications in this manual are subject to change to im-
prove the performance of the product.
yTo purchase optional accessories, visit an electronics store or online shopping site or contact the
retail store where you purchased the product.
CAUTION
NOTE
CD / Card
Stand Base Stand Body Screw Cover Screws
HDMI Cable
Stand Base Stand Body Screw Cover Screws
( Depending on
the country )
( Depending on the country )
Power Cord AC-DC Adapter AC-DC Adapter
or
Clear sheet
34UM58
5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Component and Button Description
Power Indicator
yOn: power is on
yOff: power is off
Ports
(Power Button)
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
yAs far as possible, avoid touching the moni-
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
yIt is advisable to place the monitor in the
original box or packing material before at-
tempting to move it.
yBefore moving or lifting the monitor, discon-
nect the power cord and all cables.
yHold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
yWhen holding the monitor, the screen should
face away from you to prevent it being
scratched.
yWhen moving the monitor, avoid any strong
shock or vibrations to the product.
yWhen moving the monitor, keep it upright,
never turn the monitor on its side or tilt it
sideways.
CAUTION
yIf you use the monitor panel without the
stand base, its joystick button may cause
the monitor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Installing the Monitor
Assembling the stand base
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
2Check the direction of the stand body
(front, back) and then mount the stand body
onto the stand hinge.
Tighten two screws into the back of the stand
body .
1Place the screen face down.
3
4Attach the screw cover.
Stand Body
Stand Body
Stand Base
Stand Hinge
Attach the Stand Base to Stand Body.
Tighten the screw to the right.
1
2
Screws
Screw Cover
25UM58
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
2Check the direction of the stand body
(front, back) and then mount the stand body
onto the stand hinge.
Tighten two screws into the back of the stand
body .
1Place the screen face down.
Applying excessive force when tightening
the screws may cause damage to the moni-
tor. Damage caused in this way will not be
covered by the product warranty.
CAUTION
3
4Attach the screw cover.
It may hurt your foot off the stand, so be
careful.
CAUTION
Stand Body
Stand Body
Stand Base
Stand Hinge
Attach the Stand Base to Stand Body.
Tighten the screw to the right.
1
2
Screws
Screw Cover
29UM58 34UM58
Using the cable holder
9
ENG
ENGLISH
ASSEMBLING AND PREPARING
Detaching the stand base
2Remove the screw cover.
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
1Place the screen face down.
25UM58
3Remove the two screws on the back of stand
body.
As shown in the illustration, disconnect the
stand body from the stand hinge.
Screw cover
Stand Body
Stand Base
Turn the screw to the left.
Pull out the Stand Base.
41
2
Screws
Stand Body
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
2Remove the screw cover.
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
yIllustrations in this document represent typi-
cal procedures, so they may look different
from the actual product.
yDo not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result
in personal injury.
yWhen lifting or moving the monitor, do not
touch the monitor screen. Applying force or
pressure may damage the monitor screen.
Instead, hold the stand body or the plastic
frame of the product.
CAUTION
1Place the screen face down.
29UM58 34UM58
3Remove the two screws on the back of stand
body.
As shown in the illustration, disconnect the
stand body from the stand hinge.
Stand Hinge
Screw cover
Stand Body
Stand Body
Stand Base
Turn the screw to the left.
Pull out the Stand Base.
41
2
yThe components in the illustrations may dif-
fer from the actual product.
yDo not carry the monitor upside down, as this
may cause it to fall off its stand and result in
damage or injury.
yTo avoid damaging the screen when lifting
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
CAUTION
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Monitor de LG
LG
LG UltraGear 45GR95QE Manual de usuario
LG
LG UltraGear 27GN800 Manual de usuario
LG
LG Flatron W2361TQ Manual de usuario
LG
LG 34UC97 Manual de usuario
LG
LG E2341V Manual de usuario
LG
LG 23ET63V Manual de usuario
LG
LG 34UC97 Manual de usuario
LG
LG 27MP89HM-S Manual de usuario
LG
LG 27BK550Y-W Manual de usuario
LG
LG DX2343 Manual de usuario
LG
LG 27MP59HT Manual de usuario
LG
LG UltraFine 27MD5KL Manual de usuario
LG
LG 22MK400A-B Manual de usuario
LG
LG Flatron L1722P Manual de usuario
LG
LG L192WS-BNQ Manual de usuario
LG
LG UltraGear 27GQ50A-B.AEUQ Manual de usuario
LG
LG 22MP56HQ Manual de usuario
LG
LG L1960SR Manual de usuario
LG
LG 29UC97C-B Manual de usuario
LG
LG 24MP59HT Manual de usuario
