LG DM2352D-PZ.AEK Manual de usuario
User Guide
This is a 「User Guide」 installed on TV.
The contents of this guide are subject to change without prior notice for quality
improvement.
GP2
GP2
GP2
eng
Press GUIDE button.
[In Digital mode only]
Obtains information about programmes and airtime. Checks the broadcasting
time of the desired programme and schedule viewing.
GP2
eng
❐Automatically Setting Up Programme
SETTINGS ➾ SETUP ➙Auto Tuning
Automatically tunes the programmes.
1 Select Country where the TV is used. Programme settings change depending
on the country you choose.
2 Initiate Auto Tuning.
3 Select Input Source of your choice.
4 Set Auto Tuning following screen instructions.
✎If Input Source is not connected properly, programme registration may not
work.
✎Auto Tuning only finds programmes that are currently broadcasting.
✎If Lock System is turned on, a pop-up window will appear asking for
password.
GP2
eng
❓Cable DTV Setting option
When searching for programmes using FULL setting it can take a long time. The
following values are needed in order to search all available programmes quickly
and correctly. The commonly used values are provided as “default”.
• Frequency : Enter a user-defined frequency.
• Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which
a device such as modem sends symbols to a channel).
• Modulation : Enter a user-defined modulation. (Modulation: Loading of audio
or video signals onto carrier).
• Network ID : Unique identifier allocated for each user.
• Start Frequency : Enter a user-defined start frequency range.
• End Frequency : Enter a user-defined end frequency range.
GP2
eng
❐Cable DTV Setting
SETTINGS ➾ SETUP ➙ Cable DTV Setting
[In Cable mode only]
When Channel Auto Update is On, you can update information for all the
programmes that can be updated, including the programme currently being
watched. When Channel Auto Update is Off, you can only update information for
the programme currently being watched.
✎The range that a user can select from the Service Operator menu differs
depending on number of Service Operator supported by each country.
✎If number of supported Service Operator for each country is 1, corresponding
function becomes inactive.
✎You can not select the Cable DTV Setting when the service operator is set to
“Ziggo”.
GP2
eng
❐To use Manual Tuning
SETTINGS ➾ SETUP ➙ Manual Tuning
Adjusts programmes manually and saves the results.
For digital broadcasting, signal strength and signal quality can be checked.
For analogue broadcasting, you can set up station names and use fine tuning.
Normally fine tuning is only necessary if reception is poor.
GP2
eng
❐To edit programmes
SETTINGS ➾ SETUP ➙ Programme Edit
Edits the saved programmes.
Set as favourite programme, block/unblock programme, skip programme etc. of
the selected programme.
GP2
eng
Press TEXT button.
[depending on the country]
Teletext is a free service provided by the TV station that offers text-based
information about TV programmes, news and weather.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT
systems.
• Colour button: To select the preceding or following page.
• Number button: Enters the desired page number.
• ꔵ: To select the preceding or following page.
Tabla de contenidos
Otros manuales de Televisor LED de LG
LG
LG 60UJ6540 Manual de usuario
LG
LG 65UN560H0UD Guía de inicio rápido
LG
LG 32LM577 Series Manual de usuario
LG
LG QNED 82 Manual de usuario
LG
LG 43LJ55 Series Manual de usuario
LG
LG 22LN410D Guía de inicio rápido
LG
LG 22MN43T Manual de usuario
LG
LG LB45 series Manual de usuario
LG
LG 50UQ80006LB Manual de usuario
LG
LG 65US660H Series Manual de usuario
LG
LG LB58-Z Manual de usuario
LG
LG 65UR91006LB.AMNE Manual de usuario
LG
LG 65US66 Series Manual de usuario
LG
LG 43UJ6520-PB Manual de usuario
LG
LG LW341 Series Manual de usuario
LG
LG LB56 Manual de usuario
LG
LG 47LB5800 Manual de usuario
LG
LG 29LN300B Manual de usuario
LG
LG 75UR762H9ZC.AEU Manual de usuario
LG
LG 49UJ6200 Manual de usuario
