LG Tone Pro HBS-750 Manual de usuario
Rev 1.0 RU
HBS-750 User Manual
BLUETOOTH®Stereo Headset
English
Рyccкий
Қазақша
Українська
www.lg.com
ON OFF
English
All rights reserved.
LG Electronics Inc., 2014
Note: For the best performance and
to prevent any damage to, or misuse of the
HBS-750, please read all of the information
carefully prior to using the HBS-750.
Any modications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
HBS-750 User Manual
BLUETOOTH®Stereo Headset
ON OFF
2
ENG
Description of parts
Earbuds (2 Sets) User Manual
USB Charging Cable WEEE Card
Item Description
Bluetooth
®
specication
3.0 (Headset / Hands-Free / A2DP Proles)
Battery
Battery 3.7V / 195mAh Li-Polymer
Standby time / Talk Time Up to 500Hrs / Up to 15Hrs
Music play time Up to 10Hrs
Charging time < 2.0Hrs
Charging rated input DC 4.75 V ~ 5.6 V, 400mA
Operation temperature -10°C ~ 60°C
Dimension / weight 138.5(W) X 173.1mm(L) X 17.5mm(T) / 36g
Package Contents
Specication
ON OFF
VOLUME UP Button
VOLUME DOWN Button
REW Button
Power Switch
FF Button
PLAY / PAUSE / STOP Button
Earphone (R)
Charging
Port
CALL Button,
LED Indicator
Microphone
Earphone (L)
Memory Flex Neck Strap
3
ENG
Power On / Power Off
- Move the Power switch to the ‘ON’ or ‘OFF’ side.
Charging
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid red light and change to violet
when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
Low Battery
- An announcement will be made once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- Press and hold the VOLUME DOWN button for 1 second.
- There are 3 levels of battery status
Battery status High Medium Low
Voice Prompt Battery High Battery Medium Battery Low
LED display
Blinking
Blue LED
3 times
Blinking
Violet LED
3 times
Blinking
Red LED
3 times
- HBS-750 battery status indicator will appear on the iPhone screen.
How to Use
4
ENG
How to Use
Pairing
- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled
handset.
- To pair your headset with an additional handset, the headset must be placed in
Pairing Mode.
- There are 2 Pairing Mode Methods with the HBS-750.
Easy Pairing (First Time Pairing)
1. Move the Power switch to the ‘ON’ side to turn on the HBS-750. When the headset
enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, nd the Bluetooth Menu and “search for” or “add” new
devices.
• Select “LG HBS750” from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter “0000” (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
• Once pairing has completed successfully, you will hear “Your headset paired.”.
• The HBS-750 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
• With the power off, press the CALL button and move the Power switch to the ‘ON’
side at the same time for 2 seconds.
• When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 3.
5
ENG
Advanced Multipoint
The HBS-750 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing
instructions on page 2).
- Turn off the headset.
- With the power off, press the CALL button and move the Power switch to the ‘ON’
side at the same time for 2 seconds to enter Manual Pairing mode.
- Now, pair and connect the headset with your other Bluetooth-enabled handset.
(this will be your primary handset).
- Once this handset is paired and connected, go back and connect the originally
paired handset to the headset. This will now be your secondary handset.
* NOTE: When the HBS-750 is connected to two handsets at the same
time(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-750 will enter pairing mode.
Calling Function
- Voice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
- While speaking on an active call, press the CALL button for 1 second to switch
to an incoming call.
- To switch between 2 active calls, press the CALL button for 1 second.
- To terminate the active call or both calls at once, briey press the CALL button.
- If both handsets are receiving an incoming call, the headset will default to the
primary device.
Multi-connection
How to Use
6
- If the HBS-750 is turned off (either accidentally or intentionally) while connected
to a handset, the headset and handset will disconnect. The headset and handset
will automatically reconnect when the HBS-750 is turned back on while in range.
- Secondary handset need to be connected via selecting “LG HBS750” from the
list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the
headset and handset will disconnect and HBS-750 will vibrate to alert.
* If vibrate is set to off by pressing VOLUME UP button for 3 seconds, HBS-750
will not vibrate.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briey press the CALL button on the HBS-750 to
reconnect manually.
* It is possible to use these functions only when your handset supports them. For
further information about using these features, please consult your handset’s
user manual.
- While in multi-connection and streaming, the inactive paired device, which is
out of range, will be disconnected. The HBS-750 will alert once with no attempt
to reconnect.
How to Use
Auto Reconnect
Answering a call / Ending a call
- When there is an incoming call, the headset will ring and vibrate.
* If vibrate is set to off by pressing VOLUME UP button for 3 seconds, HBS-750
will not vibrate.
- Briey press the VOLUME DOWN button to stop vibration.
- Briey press the CALL button.
Transferring a call
- While on a call on your handset, press and hold VOLUME UP button for 3
seconds to transfer the audio either from headset to handset or from handset
to headset.
Calling
ENG
7
Voice dialing
- Briey press the CALL button to activate “Voice Command”.
Note: If the handset does not support Voice Dialing, it is possible that performing
this action will activate Last Number Redial.
Last number redial
- Press and hold the CALL button for 1second to activate “Last Number Redial”.
The headset will beep, and call the last number dialed.
Call waiting
- Answer a second call without hanging up the rst call by pressing the CALL
button for 1 second (you will hear a beep). Press the CALL button for 1second to
turn to the original call.
- Briey press the CALL button to terminate the active call or both calls at once.
(subject to handset’s support)
Rejecting a Call
- Press the CALL button for 1second when the handset rings.
Mic Mute
- Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously
for 1 second to mute/unmute the Mic during conversation.
- Briey press the VOLUME button.
Volume control
Audio streaming controls
- PLAY : Briey press the PLAY/PAUSE button.
- PAUSE : Briey press the PLAY/PAUSE button.
- STOP : Press and hold the PLAY/PAUSE button.
- NEXT SONG : Briey press the FF button.
- PREVIOUS SONG : Briey press the REW button.
- FAST FORWARD : Press and hold the FF button.
- REWIND : Press and hold the REW button.
How to Use
ENG
8
Equalizer
- While playing music, press and hold VOLUME UP and VOLUME DOWN buttons
simultaneously for 1 second to switch between EQ’s (Bass Boost(Default) g
Normal g Treble Boost).
- The bass coming from the speakers can vary as a result of the size of the Earbud
that is being used.
SMS Reader
The HBS-750 Bluetooth headset supports SMS reading on
Android TM based devices.
In Google Play™ Store search for the LG ‘BT Reader’
application and install on your device to use this function.
* The 2D barcode shown below helps you download the LG
‘BT Reader’ application from Google Play™ Store. Google
Play is a trademark of Google, Inc.
aptX®
- HBS-750 features aptX® technology that ensures audio content transmitted over
Bluetooth is instant and crystal-clear.
- aptX® is automatically enabled as long as the source device supports it.
How to Use
Vibrate Control
- To activate or deactivate the ‘Vibrate’ function, press and hold VOLUME UP button for 3
seconds. You will hear “Vibrate on” or “Vibrate off” when it is activated or deactivated.
- When HBS-750 is set to vibrate off, and HBS-750 will not vibrate when receiving
‘incoming call’ and being ‘out of range’.
- By powering the unit off and then powering the unit back on, the vibration
functionality will be activated.
ENG
Otros manuales para Tone Pro HBS-750
2
Tabla de contenidos
Idiomas:
Otros manuales de Auriculares de LG
LG
LG TONE Free HBS-FN6 Manual de usuario
LG
LG HBM-220 Manual de usuario
LG
LG HBM-770 Manual de usuario
LG
LG HBM-800 - - Bluetooth hands-free Car Manual de usuario
LG
LG Tone Free TONE-T60Q Manual de usuario
LG
LG TONE FREE Manual de usuario
LG
LG TONE INFINIM HBS-910 Manual de usuario
LG
LG TONE ACTIVE PLUS HBS-A100 Manual de usuario
LG
LG 285 Manual de usuario
LG
LG LG TONE PRO HBS-780 Manual de usuario
LG
LG TONE Free HBS-FN6 Manual de usuario
LG
LG TONE Free fit TONE-UTF8Q Manual de usuario
LG
LG HBS-500 Manual de usuario
LG
LG TONE-FP3W Manual de usuario
LG
LG TONE ULTRA HBS-820 Manual de usuario
LG
LG TONE PRO HBS-760 Manual de usuario
LG
LG Tone Free TONE-T60Q.AUSACBK Manual de usuario
LG
LG TONE PLATINUM HBS-1100 Manual de usuario
LG
LG TONE Style HBS-SL5 Manual de usuario
LG
LG TONE Free fit TONE-TF8Q Manual de usuario
