LG HBS-760 TonePRO Manual de usuario
English
All rights reserved.
LG Electronics Inc., 2015
Note: For the best performance and
to prevent any damage to, or misuse of the
HBS-760, please read all of the information
carefully prior to using the HBS-760.
Any modications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
HBS-760 User Manual
Bluetooth® Stereo Headset
2
ENG
Description of parts
Extra Ear Gels
(small & large)
- The medium size Ear Gels are equipped to the product.
User Manual
USB Charging Cable WEEE Card
(Europe Only)
Item Description
Bluetooth
®
specication
4.1 (Headset / Hands-Free / A2DP Proles)
Battery
Battery 3.7 V / 210 mAh Li-Polymer
Standby time / Talk Time Up to 540 hours / Up to 16 hours
Music play time Up to 10.5 hours
Charging time Less than 2 hours
Charging rated input DC 4.75 V ~ 5.6 V, 400 mA
Operation temperature -10°C ~ 60°C
Dimension / weight 138 mm (W) x 171 mm (L) x 16.2 mm (H)/34.2 g
Package Contents
Specications
FF/REW Switch
Charging Port
Power Switch Microphone
Earbud (L)
LED Indicator
CALL Button
VOLUME Switch (+/-)
PLAY/PAUSE/STOP Button
Earbud (R)
3
ENG
Power On / Power Off
- Slide the Power switch to the ON or OFF position.
Charging
- When the charger is connected (with the power on or off) the headset will turn off.
- While charging, the LED indicator will show a solid red light and then change to
violet when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
Low Battery
- An announcement will be made once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- Slide the VOLUME switch to the - position for 1 second.
Battery Status High Medium Low
Voice Prompt Battery High Battery Medium Battery Low
LED Indicator Blinking
Blue
Blinking
Violet
Blinking
Red
How to Use
4
ENG
How to Use
Pairing
- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled
handset.
Easy Pairing (First Time Pairing)
1. Slide the Power switch to the ON position to turn on the HBS-760. When the
headset enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, nd the Bluetooth Menu and search for or add new devices.
• Select LG HBS760 from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter 0000 (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
• Once pairing has completed successfully, you will hear “Your headset paired.”
• The HBS-760 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
• With the power off, press the CALL button and slide the Power switch to the ON
position at the same time for 2 seconds.
• When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 3.
5
ENG
Advanced Multipoint
The HBS-760 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets (see the pairing
instructions on page 4).
- Turn off the headset.
- With the power off, press the CALL button and slide the Power switch to the ON
position at the same time for 2 seconds to enter Manual Pairing mode.
- Pair and connect the headset with your other Bluetooth-enabled handset. (this
will be your primary handset).
- Once this handset is paired and connected, go back and connect the originally
paired handset to the headset. This will now be your secondary handset.
* NOTE: When the HBS-760 is connected to two handsets at the same time
(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-760 will enter pairing mode.
Calling Function
- Voice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
- While speaking on an active call, press the CALL button for 1 second to switch
to an incoming call.
- To switch between 2 active calls, press the CALL button for 1 second.
- To terminate the active call or both calls at once, briey press the CALL button.
- If both handsets are receiving an incoming call, the headset will default to the
primary device.
Multi-connection
How to Use
6
ENG
- The headset and handset will automatically reconnect when the HBS-760 is
turned back on while in range.
- The secondary handset need to be connected via selecting LG HBS760 from the
list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the
headset and handset will disconnect and HBS-760 will vibrate to alert.
* If vibrate is set to off by sliding the VOLUME switch to the + position and hold for
2 seconds, HBS-760 will not vibrate.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briey press the CALL button on the HBS-760 to
reconnect manually.
* It is possible to use these functions only when your handset supports them. For
further information about using these features, please consult your handset’s
user manual.
- While in multi-connection and streaming, the inactive paired device, which is
out of range, will be disconnected. The HBS-760 will alert once with no attempt
to reconnect.
How to Use
Auto Reconnect
Answering a call / Ending a call
- When there is an incoming call, the headset will ring and vibrate.
* HBS-760 will not vibrate if vibration function is on ‘off’.
- Briey slide the VOLUME switch to the - position to stop the vibration.
- Briey press the CALL button.
Transferring a call
- While on a call on your handset, press the PLAY/PAUSE/STOP button twice
on the HBS-760 to transfer the audio either from headset to handset or from
handset to headset.
Calling
7
ENG
Voice dialing
- Briey press the CALL button to activate Voice Command.
Note: If the handset does not support Voice Dialing, it is possible that performing
this action will activate Last Number Redial.
Last number redial
- Press and hold the CALL button for 1second to activate Last Number Redial.
The headset will beep, and call the last number dialed.
Call waiting
- Answer a second call without hanging up the rst call by pressing the CALL
button for 1 second (you will hear a beep). Press the CALL button for 1second to
turn to the original call.
- Briey press the CALL button to terminate the active call or both calls at once.
(subject to handset’s support)
Rejecting a Call
- Press the CALL button for 2 seconds when the handset rings.
Mic Mute
- Slide the VOLUME switch to the + position and the FF/REW switch to the
REW position at the same time for 1 second to mute/unmute the Mic during
conversation.
* Precaution : For your safety, do not operate microphone mute during driving.
- Slide the VOLUME switch to the + or - position.
Volume control
Audio streaming controls
- PLAY : Briey press the PLAY/PAUSE button.
- PAUSE : Briey press the PLAY/PAUSE button.
- STOP : Press and hold the PLAY/PAUSE button.
- NEXT SONG : Briey slide the FF/REW switch to the FF position.
- PREVIOUS SONG : Briey slide the FF/REW switch to the REW position.
- FAST FORWARD : Slide and hold the FF/REW switch to the FF position.
- REWIND : Slide and hold the FF/REW switch to the REW position.
How to Use
8
ENG
Equalizer
- While playing music, press the PLAY/PAUSE/STOP button twice to switch between
Bass Boost (default), Normal, and Treble Boost.
- The bass coming from the speakers can vary as a result of the size of the ear gel
that is being used.
aptX®
- The HBS-760 features aptX® technology that ensures audio content transmitted via
Bluetooth is instant and crystal-clear.
- aptX® is automatically enabled as long as the source device supports it.
How to Use
Vibrate Control
- To activate or deactivate the Vibrate function, slide the VOLUME switch to the +
position for 2 seconds. You will hear “Vibrate on” or “Vibrate off” when it is activated
or deactivated.
- When the HBS-760 is set to vibrate off, the headset will not vibrate when receiving an
incoming call or when it is out of range.
- By powering the unit off and then powering the unit back on, the vibration functionality
will be activated.
9
ENG
Tone & TalkTM
The HBS-760 Bluetooth headset supports SMS reading on
AndroidTM based devices.
To download the application, search for Tone & Talk in Google
PlayTM * or scan the QR code. Follow the installation instructions.
* Google Play is a trademark of Google, Inc.
Function Action
Current time alert Slide the FF/REW switch to the FF position for 1 second.
Read latest SMS or MMS Slide the FF/REW switch to the REW position for 1 second.
Designated contact
Press the CALL button twice (select Designated contact
and set the telephone number from Headset call settings
menu of Tone & Talk
TM
).
Favorite contacts
1. Press the CALL button twice.
2. Select the name to call by sliding the FF/REW switch
for 1 second.
3. Press the CALL button twice to call (select Favorite
contacts and set telephone number from the Headset call
settings menu of Tone & Talk
TM
).
Call logs
1. Press the CALL button twice.
2. Select the name to call by sliding the FF/REW switch
for 1 second.
3. Press the CALL button twice to call (select Call logs and
set the telephone number from the Headset call settings
menu of Tone & Talk
TM
).
Tone & TalkTM
How to Use
10
ENG
LED Indicator
Issue Possible problem Resolution
Does not
turn on Check whether the battery of
the HBS-760 is fully charged. Charge the battery.
Unable to
communicate
with the LG
Bluetooth
Headset
HBS-760
Check whether the handset
supports the headset or
hands-free Bluetooth proles.
Determine whether your
handset supports the headset
or hands-free Bluetooth proles.
Check whether the battery of
the HBS-760 is low.
Charge the battery.
Unable to pair
the HBS-760
with the
Bluetooth
device
Check and make sure the
headset is on.
Slide the Power switch to the
ON position to turn on the
headset.
Check and make sure the
headset is placed in pairing
mode.
With the power off, press the
CALL button and slide the
Power switch to the ON position
at the same time for 1 second
to place the headset in Manual
Pairing mode.
Low sound
(speaker) Check the speaker volume. lncrease the volume level.
Function HBS-760 Status Action
Operating
Pairing mode The blue LED light stays on.
Headset / hands-free
prole connected
The blue LED light ickers 1 time.
Call connected The blue LED light ickers 1 time.
Charging Charging The red LED light stays on and changes to
violet when charged 80% and above.
Charging complete
The blue LED light stays on.
Troubleshooting
Otros manuales para HBS-760 TonePRO
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Auriculares de LG
LG
LG TONE-FP5W Manual de usuario
LG
LG HBM-500 Manual de usuario
LG
LG TONE Studio HBS-W120 Manual de usuario
LG
LG HBS-F110 Manual de usuario
LG
LG TONE-T90Q.AUSACBK Manual de usuario
LG
LG HBM-800 - - Bluetooth hands-free Car Manual de usuario
LG
LG TONE Style HBS-SL5 Manual de usuario
LG
LG TONE-FP8W Manual de usuario
LG
LG TONE INFINIM HBS-912 Manual de usuario
LG
LG TONE Free HBS-FN4 Manual de usuario
LG
LG TONE Ultra SE Manual de usuario
LG
LG TONE FREE Manual de usuario
LG
LG HBS-730 Manual de usuario
LG
LG HBM-730 Manual de usuario
LG
LG Tone Free HBS-FN7 Manual de usuario
LG
LG Tone Active+ HBS-A100 Manual de usuario
LG
LG HBS-730 Manual de usuario
LG
LG TONE FREE Manual de usuario
LG
LG TH900 Manual de usuario
LG
LG Tone Infinim HBS900 Manual de usuario
