LG HBM-290 Manual de usuario
English
繁體中文
简体中文
Rev 1.0 TW
All rights reserved.
LG Electronics Inc., 2014
Note: For the best performance and
to prevent any damage to, or misuse of the
HBM-290, please read all of the information
carefully prior to using the HBM-290.
Any modications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
LG Electronics
BLUETOOTH®Headset
HBM-290 User Manual
2
ENG
Description of parts
Earbuds (2 Sets)
Ear loop
User Manual
USB Charging Cable
Package Contents
Call Button
Microphone
Charging Port
Speaker Volume Up/Down
Button
Power Button
LED Indicator
WEEE Card
3
Item Description
Bluetooth
®
specication
3.0 (Headset / Hands-Free / A2DP Proles)
Battery
Battery 3.7V / 110mAh Li-Polymer
Standby time / Talk Time Up to 550Hrs / Up to 10Hrs
Charging time < 2.0Hrs
Charging rated input DC 4.75 V ~ 5.6 V, 400mA
Operation temperature -10°C ~ 60°C
Dimension / weight 17.9mm(W) X 54mm(L) X 9.8mm(T) / 10.3g
ENG
Specication
Ear Loop Attachment
Left Right
How to Use
Description of parts
4
How to Use
Power On / Power Off
- Press and hold the POWER button for 3 seconds.
Charging
- When the charger is connected, the headset will turn off.
- While charging, the LED indicator will show a solid red light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the headset.
- When charging is complete, the LED indicator will turn off.
Low Battery
- An announcement will play once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- Press and hold the VOLUME DOWN button for 3 seconds to check the battery
status of the HBM-290. The audible battery status alert will inform you of the battery
level. There are 3 levels of battery power:
1. Battery High
2. Battery Medium
3. Battery Low
Pairing
- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled
handset.
- To pair your headset with an additional handset, the headset must be placed in
Pairing Mode.
- There are 2 Pairing Mode Methods with the HBM-290.
ENG
5
Easy Pairing (First Time Pairing)
1. Press and hold the POWER button for 3 seconds to turn on the HBM-290. When
the headset enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, nd the Bluetooth Menu and “search for” or “add” new
devices.
• Select “LG HBM-290” from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter “0000” (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
• Once pairing has completed successfully, you will hear “Headset paired.”.
4. Some handsets might ask for permission to access the phone’s contact list. If you
receive a message from your handset, please select “OK” or “Allow access”
• The HBM-290 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
• With the power off, press and hold the POWER button for 6 seconds.
• When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 4.
Advanced Multipoint
The HBM-290 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled phones. (per the pairing
instructions on page 5).
- Turn the headset off and use the Manual Pairing method as described on page 5
to enter Pairing Mode.
- Now, pair and connect the headset with your other Bluetooth-enabled phone.
(This will be your primary phone).
Multi-connection
How to Use
ENG
6
How to Use
- Once this phone is paired and connected, go back and connect the originally
paired phone to the headset. (This will now be your secondary phone).
* NOTE: When the HBM-290 is connected to two phones at the same
time(multipoint), the headset calling functions will work with the primary phone.
Calling Function
- Voice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
- While speaking on an active call, press the CALL button for 1 second to switch
to an incoming call.
- To switch between 2 active calls, press the CALL button for 1 second.
- To terminate the active call or both calls at once, briey press the CALL button.
- If both handsets are receiving an incoming call, the headset will default to the
primary device.
- If the HBM-290 is turned off (either accidentally or intentionally) while connected
to a handset, the headset and handset will disconnect. The headset and handset
will automatically reconnect when the HBM-290 is turned back on while in range.
- Secondary handset need to be connected via selecting “LG HBM290” from the
list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the
headset and handset will alert the user with a beep, and the headset and device
will disconnect.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briey press the CALL button on the HBM-290 to
reconnect manually.
- While trying to reconnect, your headset will beep and the LED indicator will icker
twice every 5 seconds.
- If the headset does not reconnect within 60 minutes, it will turn off.
Auto Reconnect
ENG
7
Answering a call / Ending a call
- When there is an incoming call, the headset will ring.
- Briey press the CALL button.
Transferring a call
- To transfer a call from the headset to handset, press and hold the VOLUME UP
button for 3 seconds.
- While on a call on your handset, briey press the CALL button to transfer the
audio to the headset.
Voice dialing
- Briey press the CALL button to activate “Voice Command”.
Note: If the handset does not support Voice Dialing, it is possible that performing
this action will activate Last Number Redial.
Last number redial
- Press and hold the CALL button for 1second to activate “Last Number Redial”.
The headset will beep, and call the last number dialed.
Call waiting
- Answer a second call without hanging up the rst call by pressing the CALL
button for 1 second (you will hear a beep). Press the CALL button for 1second to
turn to the original call.
- Briey press the CALL button to terminate the active call or both calls at once.
(subject to handset’s support)
Rejecting a Call
- Press the CALL button for 1second when the handset rings.
Mic Mute
- Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously
for 1 second to mute/unmute the Mic during conversation.
Calling
How to Use
ENG
8
How to Use
- Briey press the VOLUME button.
Volume control
Audio streaming (A2DP)
The HBM-290 supports music streaming (A2DP).
When you play music from your A2DP enabled device, it will automatically transfer to
your headset. Music will automatically pause when you have an incoming call. When
the call is ended the music will start playing again.
A2DP allows streaming of all audio from your phone and running applications
including music and GPS navigation.
HD speaker
The HBM-290 supports high denition voice calling and audio streaming.
*Network must support HD Voice for higher quality calling.
SMS Reader
The HBM-290 Bluetooth headset supports SMS reading on
Android TM based devices.
In Google Play™ Store search for the LG ‘BT Reader Plus’
application and install on your device to use this function.
* The 2D barcode shown below helps you download the LG
‘BT Reader Plus’ application from Google Play™ Store.
Google Play is a trademark of Google, Inc.
ENG
9
Function HBM-290 Status Action
Operating
Power on The LED will ash 4 times.
Power off
The LED will ash 4 times and then turns off.
Pairing mode The LED stays on.
Headset / Hands-Free /
A2DP proles connected
The LED will ash twice every 5 seconds.
Call connected The LED will ash twice every 5 seconds.
Out of range
For the rst 15 minutes after the devices are
disconnected the LED will ash twice every 5
seconds. After that it will ash once every 5 seconds.
Charging Charging The RED LED stays on.
Charging complete
The RED LED turns off.
Issue Possible problem Resolution
Does not turn on Check whether the battery of
the HBM-290 is fully charged. Charge the battery.
Unable to
communicate with
the LG HBM-290
Check whether the device
supports the headset or
hands-free Bluetooth proles.
Determine whether your device
supports the Headset or Hands-
free Bluetooth proles.
Check whether the battery of
the HBM-290 is low.
Charge the battery.
Unable to pair the
HBM-290 with
Bluetooth
®
device
Check and make sure the
headset is on.
Press and hold the POWER
button for at least 3 seconds to
turn on the headset.
Check and make sure the
headset is placed in pairing
mode.
With the power off, press and hold
the POWER button for 6 seconds
to manually place the headset in
pairing mode.
Low sound (speaker) Check the speaker volume. lncrease the volume level.
Cannot to hear audio
streaming
Check whether other device
is streaming. Stop other device streaming.
LED indication
Troubleshooting
ENG
10
Do not drop the unit from high places.
Do not modify, repair, or take apart.
Do not expose directly to water, alcohol, benzene, etc. for cleaning.
Do not expose directly to ammables.
Do not place or keep the unit near ammables.
Keep unit away from humidity & dust.
Do not place heavy objects on the unit.
Only use the headset with an original LG charger, otherwise it may be damaged.
• Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• There is a risk of explosion if the battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
FCC NOTICE TO USERS :
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE :
To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user’s authority to
operate the device.
CE NOTICE TO USERS :
Hereby, LG Electronics Inc. declares that this HBM-290 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
FCC ID: BEJHBM290
Precautions
Declaration of Conformity
ENG
Otros manuales para HBM-290
2
Tabla de contenidos
Otros manuales de Auriculares de LG
LG
LG Tone Free HBS-FN7 Manual de usuario
LG
LG TONE FREE Manual de usuario
LG
LG HBS-110 Manual de usuario
LG
LG Tone Pro HBS-750 Manual de usuario
LG
LG TONE ULTRA HBS-810 Manual de usuario
LG
LG TONE Free HBS-FN6 Manual de usuario
LG
LG HBM-730 Manual de usuario
LG
LG HBM-310 Manual de usuario
LG
LG Tone Free HBS-FN7 Manual de usuario
LG
LG TONE-NP3 Manual de usuario
LG
LG TONE Free TONE-DFP5 Manual de usuario
LG
LG HBM-800 - - Bluetooth hands-free Car Manual de usuario
LG
LG HBM-215 Manual de usuario
LG
LG TONE FREE Manual de usuario
LG
LG TONE Style HBS-SL6S Manual de usuario
LG
LG HBM-W600 Manual de usuario
LG
LG TONE Free HBS-FN6 Manual de usuario
LG
LG TONE PLATINUM HBS-1100 Manual de usuario
LG
LG TONE-T90Q.AUSACBK Manual de usuario
LG
LG TONE Free TONE-UFP9 Manual de usuario
