LG Al4000f Manual de usuario

Automatic Drying Rack installation Manual (Entire model)

Standard apartment (Normal slave for seal) installation manual

1. Step :

Secure space for installation

Secure space from the front, rear, side for more than 100mm

Make sure no obstacles such as door, windows, rack or etc.

2. Step :

Secure Electronic line

Warning : Turn off CB, attached connector

For easy After service and avoid electronic shork

Make sure connect right side to avoid unpluged.

If On/off switch is mounted the wall

Cause of customer unconvenince and unstable power supply

Changed composition of power example photo4)

3. Step :

Mark position of anchor

Secure the space and mark 4 position of Anchor

4. Step :

Make hole of Anchor

Make depth 4 positions of Anchor between 30 to 35mm

Warning : Not exceed more than 40mm : danger of broken electric line or water pipe

5. Step :

Stained anchor

Stained 4 anchor example photo6

※ Warning Make sure use more than 5/16" size anchor to avoid drop down

Wedge anchor - make sure put more than 1cm of head of anchor

Strong anchor - Stained with hammer correctly

Do not use screw or other materials to stained, it cause of drop down

6. Step :

Mounted body and connect power supply

Mounted body for example photo8, connect power supply thru hole of body

Wall mounted switch, connect signal line thru hole of body to PCB

Connect power supply for example photo9

When complete connected 'Beep' sound from PCB

To avoid electronic short from moisture

Line shoul be twisted U style and connect

7. Step :

Connect Anchor nut

Tight nus as strong as possible inside of the body

Actuall hanging anchor

nut

Photo5) Mark position

100mm 100mm

2000mm

Photo1) Front

Photo9) Power supply

(Green, Margenta complex is groud)

Photo3) power supply

(Green is earth)

Photo4) Mounted SW

Blue -Drying rack

Photo2) Side

100mm 100mm

700mm

Photo6) Stained anchor(Wedge anchor) Photo7) Stained anchor(Strong anchor)

그림8) 본체 걸기

'U'형태

8. Step :

Function test and install the cover (★ Attention ★)

Pulled side of wire weather any materials touched it or not

Up and down, limit switch for obstables function test

If LED lights is attached, line connect to PCB and function test

9. Step :

Attached pipe bracket to X-link

Release tie and down the X-link

X-link washer movement is sensor direction

Insert wire head into bracket for example photo11

Insert front of wire head into bracket for example photo12

Insert rear of wire head into bracket for example photo13

Attention : Placed outside first, inside first cause of bend of X-link

Stained plastic materials put from inside see photo14

Photo15) Hang the bracket

10. Step :

Hang the pipe

Placed 2 side pipe into 4 main pipe

※ Easy placed side pipe, place correctly to put out

Parts for main pipe shoul comes out

Pully assembled 4 pipes placed into pipe bracket both side and stained

※ For safety, make the proper position between pipe bracket and pipe

See photo17

11. Sept :

Installation option parts

If hook or multipurpose hook is avaiable, hanging the pipes

If wall mounted switch, placed it correctly

12. Step :

Function TEST

Use remote control for the function test

Welltech co.,ltd

Customer service : +82 2 1600-5470

Warranty service : 1 year after installation

www.momeasy.co.kr

Operation hours : 10:00 ~ 18:00

photo12) Attached pipe bracket Photo11) hang the wire

Photo15) Hang the bracket

photo10) Pipe bracket

Sensor direction

photo13) Pipe bracket

Photo14) Hang the bracket

Photo16) Placed side pipe

Photo17) Insert pipe

Tabla de contenidos

Otros manuales de Secadora de LG

Manuales populares de Secadora de otras marcas

Bosch

Bosch WTA79200GB Manual de usuario

Amana

Amana W10233410A Manual de usuario

Miele

Miele TWH 780 WP Manual de usuario

Asko

Asko T760 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Manual de usuario

Bosch

Bosch Logixx 10 WTB76556GB Hoja de especificaciones

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Manual de instrucciones

Electrolux

Electrolux EW2H328R2 Manual de usuario

Beko

Beko DS8433RX1M Manual de usuario

Dawlance

Dawlance Spinner DS 6000 C Manual de usuario

Electrolux

Electrolux TP5080TW Manual de usuario

AEG

AEG TR838P4OB Manual de usuario

Indesit

Indesit IDV 75 Manual de usuario

Infiniton

Infiniton SD-DG85C Manual de usuario

BOMANN

BOMANN WT 5019 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Manual de usuario

Asko

Asko T793C Manual de usuario

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Manual de usuario