LG 55EH5C Guía de inicio rápido

55EH5C

www.lg.com

P/No.: MFL69588401 (1608-REV01)

Printed in Korea

*MFL69588401*

Please read this manual carefully before operating your set and retain it

for future reference.

EASY SETUP GUIDE

LG Digital

Signage

(MONITOR SIGNAGE)

https://youtu.be/6t5lcuROngM

ENG

ENGLISH

AAA

FRONT

(M4 x L8)

(M3 x L4.5)

(Φ3 x L6) (Φ3 x L10) (M4 x L10)

ENGENGLISH

You can download the web manuals for this product at the following websites.

(Keyword: EH5C)

•www.lgecommercial.com

•www.lg.com

SuperSign: www.lgecommercial.com/supersign

ENG

ENGLISH

Network

DVI OUT

DP OUT

HDMI OUT

ENGENGLISH

Network

DVI OUT

DP OUT

HDMI OUT

ENG

ENGLISH

1 Open the product box, then remove the packaging materials and the T-con box in the order they appear.

T-con box

2 Connect the cables to the Signage box. At this stage, the HDMI cable with the label marked ‘FRONT’ must be

connected to the upper part and the Rear cable must be connected to the lower part.

In the case of 16/22 pin cables, connect the cable with the red mark to the upper part. Connect the 16/22 pin

cable with the longer neck to the display set.

FRONT

ENGENGLISH

3 Attach the 16/22 pin cables using the 2 screws (M3 x L4.5).

4 If installing onto a ceiling or wall, attach the mounting brackets to the Signage box using four screws (M4 x L8).

5 Position the jack cover to fit the cables to the cut spaces and then attach it using the 2 screws (M3 x L4.5).

ENG

ENGLISH

6 Fold the connectors on the opposite side of the 16/22 pin cables to make them parallel to the cable.

7 Insert the connectors of the 16/22 pin cables into the tubes.

8 Pass the cables through the hole in the middle of the SET.

FRONT

ENGENGLISH

9 Connect the HDMI cable with the label marked ‘FRONT’ to the FRONT side. Insert the 16/22 pin cable with the red

mark to the cable holder and connect it using a screw (M3 x L4.5).

FRONT

Connect the HDMI cable (without the label marked ‘FRONT’) to the REAR side. Insert the 16/22 pin cable (without

the red mark) to the cable holder and connect it using a screw (M3 x L4.5).

When installing the product to a stand (excluding a ceiling mount or a wall mount), remove the 2 screws, change

the direction of the LG logo, and then reassemble it.

ENG

ENGLISH

Cover the FRONT side with the T-con box cover (with the IR receiver) and attach it using 4 screws (Φ3 x L6) on the

opposite side.

Cover the REAR side with the other T-con box cover and attach it using 2 screws (Φ3 x L10).

Otros manuales para 55EH5C

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Manuales populares de Señalización digital de otras marcas

SMART-AVI

SMART-AVI SIGNAGEPRO Manual de usuario

KeyWest Technology

KeyWest Technology BREEZE Manual de usuario

XtendLan

XtendLan XL-DSP-183C Manual de usuario

Dynascan

Dynascan DS861LR4 Manual de usuario

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Manual de usuario

protech

protech KT-7290 Manual de usuario

WebDT

WebDT 515A Instrucciones de montaje

Samsung

Samsung IWJ Series Manual de usuario

EVERI

EVERI Enrollment Kiosk Manual de usuario

NCR

NCR SelfServ 90 Manual

ViewSonic

ViewSonic EP4602 Manual de usuario

ViewSonic

ViewSonic EP3202r Manual de usuario

Samsung

Samsung OM46N Manual de usuario

Viessmann

Viessmann 6336 Manual de usuario

Osram

Osram Traxon Manual de instrucciones de instalación

Philips

Philips Signage Solutions Series BDL4990VL Manual de usuario

ViewSonic

ViewSonic EP5012-L Manual de usuario

Philips

Philips CRD01/00 Manual de usuario