LG LN240 Manual de usuario
- 1 -
User Manual
LN240
Ver. 1.1
2009. 09. 24
Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void
the user's authority to operate the equipment. “
Part 15.105 statement
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Part 15 Class B Compliance
This device and its accessories comply with part15 of FCC rules.
Operation is subject to the following two conditions:
(1) This device & its accessories may not cause harmful interference.
(2) This device & its accessories must accept any interference received,
including interference that may cause undesired operation.
Body-worn Operation
This device has been tested for typical body-worn operations
with the distance of 0.79inches (2.0cm) from the user’s body.
To comply with FCC RF exposure requirements, a minimum separation distance
of 0.79inches(2.0cm) must be maintained from the user's body.
Additionally, Belt clips, holsters & other body-worn accessories may not contain
metallic components.
- 11 -
Getting Started
Unlocking Your Phone
If you received your LN240 in the mail, you may need to unlock it before making calls.
1. Press the END/PWR Switch for 2~3 seconds.
2. Press soft key Unlock.
3. Enter your four-digit lock code. For security purposes, the code will not be visible as you type.
Note: If you can’t recall your lock code, try using the last four digits of your Social Security number, the
last four digits of your Phone Number or 0000.
- 13 -
View of Phone
1. END/PWR Switch: Lets you power the phone on or off.
2. Antenna: Retractable antenna provides optimum reception for 800 MHz & 1900 MHz frequencies.
3. Power On Indicator: Illuminates red when the phone powers on or when you receive incoming calls.
Flashes red when you have messages of scheduled alarms.
4. Headset Jack: Provides connection for an optional headset.
5. Volume Control Keys: Adjust the Ring Volume in the Main Menu or the Voice Volume during a call.
The keys also scroll through mouths in the Calendar or pages in the MiniBrowser.
6. Mouse Key: Allows quick and easy scrolling through the menus.
7. OK: Lets you place a call, receive a call, end a call or select menu options.
8. CLR: Lets you clear an entry or back-up in the menu.
9. Folder : Lets you answer or end calls.
===============page 3
Installing and Removing the Battery
To install the battery, insert the bo ttom of the ba ttery into the openi ng on the back o f th e phone. Then,
push the battery down until the latch clicks.
To remove the battery, press down on the latch and remove the battery from the phone.
Turning Your Phone On and Off
To turn your phone on, move the On/Off Switch ( near the antenna) to the ON position. Y our phone
performs a short self-test before letting you know it is operational.
If your phone does not turn on, make sure the battery is installed correctly and is ade quately charged or
has external power (via the AC Adapter, Cigarette Lighter Adapter or Hands-Free Car Kit).
- 14 -
To turn your phone off, move the On/Off Switch to the OFF position.
Main Menu
When yo ur phone a cquires Service, the G reeting (a b anner of text), the current tim e and d ate an d the
Main Menu are displayed. If you are in authorized analog cellular provider’s service area, you are ready
to send and receive calls.
Power Save Mode
When the phone is in an area without service for 15 minutes, it stops searching for service and enters into
the power Save Mode. When your phone activates this feature, Power Save is displayed on your screen.
The phone automatically checks for service periodically or you can check manually by pressing any key.
- 15 -
Menu Navigation
The Mouse Key lets you scroll circularly through menus quickly and easily.
As you navigate through a menu, the options are highlighted (Highlighted Test Example ) . Select an
option by highlighting it and pressing . The scroll bar at the right of the menu keeps track of your
position in the menu at all times.
For example, if you want to view your last incoming call:
1. From the Main Menu, select RECENT CALLS and press 2. (It may already be highlighted.)
2. Press the Mouse Key down to highlight and press .
If you have received any calls, they are displayed on the screen.
Entering Characters Using the Keypad(T9)
To ent er a let ter, pun ctuation or n umber when c reating P hone Bo ok or S cheduler ent ries, press t he
corresponding key until the desired character appears. By default, the firs t letter of a wor d is capitalized
and following letters are lowercase. Characters in the following order:
1 . ? , ‘ & - @ ( ) / ~ P Q R S 7 p q r s
A B C 2 a b c 2 T U V 8 t u v 8
D E F 3 d e f 3 W X Y Z 9 w x y z 9
G H I 4 g h i 4 Next 0
J K L 5 j k l 5 Shift
M N O 6 m n o 6 Space
Incoming
1 7PQRS
9WXYZ
8TUV
6MNO
5
J
4
G
3DEF
ABC
1
*
0Space
- 16 -
After a character is enter ed, the cursor automatically advances to the next space after two seconds. You
can also advance the cursor by pressing or entering a character not on the same key.
If you make a mistake, press to move the cursor left or [CLR] to era se a character. To clear the
entire entry, press and hold [CLR] for two seconds.
- 17 -
Display Icons
Display ic ons are the symbols your phone uses to com municate im portant in formation. They are as
follows:
ICON DESCRIPTION
3G send
3G receive
3G send receive
Alarm
Battery
Antenna
In use
No service
Location
Location out
Vo i c e
Vo i c e P r i v a c y
Vibrate
Roaming
TTY
SSI
Ringer
Ringer off
Text + voice
- 19 -
Using Your Phone
Placing a Call
When th e ph one is tur ned o n, ch eck the S ignal S trength ico n to see o f you are in a S ervice Ar ea or
authorized PCS CDMA provider’s service area.
1. Open the Flip.
2. Enter the phone number and press [SEND].
☞Tip! When dialing long distance, it is not necessary to dial a “1” before the area code.
3. When you are finished with your call and press [END] . If the phone is in Active Flip Mode, closing
the Flip will also end the call.
Roaming With Your Phone
Your Phone is you can use it to make and receive calls in many places.
Setting Your Phone’s Mode
Your Phone allows you to control your ability to roam. (See “Set Mode”)
Otros manuales para LN240
4
Tabla de contenidos
Otros manuales de Teléfono móvil de LG
LG
LG Secret KF750 Manual de usuario
LG
LG G Flex 2 Manual de usuario
LG
LG KS360 - Cell Phone 15 MB Manual de usuario
LG
LG LGE739BK Manual de usuario
LG
LG ISAI VIVID LGV32 Manual de usuario
LG
LG Volt 2 Manual de usuario
LG
LG Prada KF900 Manual de usuario
LG
LG GW550 Manual de usuario
LG
LG C1300 Manual de usuario
LG
LG GT540 Manual de usuario
Manuales populares de Teléfono móvil de otras marcas
Blackbe;rry
Blackbe;rry Q10 Manual de usuario
Blackbe;rry
Blackbe;rry Bold 9900 Manual de usuario
Blackbe;rry
Blackbe;rry STORM 9500 - VERSION 5.0 Manual de usuario
ISAFE MOBILE
ISAFE MOBILE IS655.2 Manual de usuario
Blackbe;rry
Blackbe;rry CURVE 8300 - SMARTPHONE Manual de usuario
Blackbe;rry
Blackbe;rry 8707 - VERSION 4.1 Manual de usuario