LG LG-E612f Manual de usuario

Some of the contents of this manual may not apply to your phone. This

depends on your phone’s software and your service provider.

This handset is not recommended for the visually impaired because of its

touch screen keyboard.

logo are registered trademarks of LG Group and its related entities. All other

trademarks are the property of their respective owners.

Google™, Google Maps™, Gmail™, Google Talk™ and Android Market™

are trademarks of Google, Inc.

•

This guide helps you get started using your phone.

If you need more information, please visit www.lg.com.

LG-E612fLG-E612f User Guide

English

Part 15.21 statement

" Change or Modifications that are not expressly approved by the manufacturer could void

the user's authority to operate the equipment. “

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device is not intended for sale in the USA.

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC

rules and ICES-003 Class B digital apparatus requirements

for Industry Canada. Operation is subject to the following

two conditions:(1) This device and its accessories may not

cause harmful interference, and (2) this device and its

accessories must accept any interference received, including

interference that may cause undesired operation.

Body-worn Operation

This device was tested for typical body-worn operations

with the back of the phone kept 1.0cm (0.39 inches) between

the user’s body and the back of the phone. To comply with

FCC RF exposure requirements, a minimum separation

distance of 1.0cm (0.39 inches) must be maintained between

the user's body and the back of the phone. Third-party

belt-clips, holsters, and similar accessories containing

metallic components may not be used. Body-worn

accessories that cannot maintain 1.0cm (0.39 inches)

separation distance between the user's body and the back

of the phone, and have not been tested for typical body-

worn operations may not comply with FCC RF exposure

limits and should be avoided.

Conformité aux normes FCC Part 15 Class B

Cet appareil et ses accessoires sont conformes aux

normes FCC Part 15 Class B de la Federal

Communications Commission et aux exigences pour

appareils numériques ICES-003 Class B d’Industrie

Canada.Son fonctionnement est sujet aux deux conditions

suivantes :(1) Cet appareil et ses accessoires ne doivent

pas provoquer de brouillage préjudiciable, et (2) cet

appareil et ses accessoires doivent accepter toutes les

interférences reçues, y compris celles pouvant causer un

fonctionnement indésirable.

Utilisation comme appareil portatif

Ce téléphone a été testé en vue d’une utilisation type

comme appareil portatif, avec une distance de 1.0cm (0,39

pouces) entre l’arrière de l’appareil et le corps de

l’utilisateur. Pour satisfaire aux exigences de la FCC en

matière d’exposition aux radiofréquences, une distance

d’au moins 1.0cm (0,39 pouces) doit être maintenue entre

le corps de l’utilisateur et l’arrière du téléphone. Les

pinces de ceinture, les étuis et autres accessoires

semblables d’autres marques et contenant des

composantes métalliques ne doivent pas être utilisés.Les

accessoires portatifs empêchant le maintien d’une

distance de 1.0 cm (0,39 pouces) entre le corps de

l’utilisateur et l’arrière du téléphone et qui n’ont pas été

testés en vue d’une utilisation type comme accessoires

portatifs peuvent ne pas satisfaire aux limites d’exposition

aux radiofréquences stipulées par la FCC et, par

conséquent, ne doivent pas être utilisés.

To turn on your phone, press and hold the Power key for 3 seconds.

To turn off the phone, press and hold the Power key for 3 seconds, then touch Power off and OK.

Menu key

Check what options are available.

Home key

Return to home from any screen.

Back key

Return to the previous screen.

Speaker/Receiver

Power/Lock key

Switch your phone on/off by pressing and holding this key.

Turn off and lock the screen.

Proximity sensor

Getting to know your phone

NOTE: Proximity sensor

When receiving and making calls,

the proximity sensor automatically

turns the backlight off and locks

the touch keypad by sensing when

the phone is near your ear. This

extends battery life and prevents

the touch keypad from activating

unintentionally during calls.

Volume keys

On the home screen: control

ringer volume.

During a call: control your In-

Call volume.

When playing a track: control

volume continuously.

•

Stereo earphone connector

Power/Lock key

WARNING

Placing a heavy object on the phone

or sitting on it can damage its LCD

and touch screen functions. Do not

cover the protective ﬁlm on the LCD’

s proximity sensor. This may cause the

sensor to malfunction.

Getting to know your phone

Installing the SIM card and

battery

To remove the back cover, hold the phone

in your hand firmly. With the other hand,

firmly press your thumb on the back

cover. Now lift off the back cover.

Slide the SIM card into the SIM card slot.

Make sure the gold contact area on the

card is facing downwards.

Insert the battery by aligning the gold

contacts on the phone and the battery.

Replace the back cover of the phone.

Charging your phone

Insert the charger, then plug it into an

electrical outlet. Your LG-E612f must be

charged before you see .

NOTE: The battery

must be fully

charged initially to

improve battery

lifetime.

Getting to know your phone

Installing the memory card

NOTE: The LG-E612f supports memory

cards up to 32 GB.

To insert a memory card:

Turn the phone off before inserting or

removing a memory card. Remove the

back cover.

Insert the memory card into the slot.

Make sure the gold contact area is facing

downwards.

Removing a memory card

Carefully remove the memory card out of

the slot.

WARNING

Do not insert or remove the memory

card when the phone is on. Doing so

may damage the memory card as well

as your phone, and the data stored on

the memory card may be corrupted.

Getting to know your phone

Otros manuales para LG-E612f

Manuales populares de Teléfono móvil de otras marcas

Zte

Zte BLADE A520 Manual de usuario

Nokia

Nokia Lumia 620 Manual de usuario

Blackbe;rry

Blackbe;rry KEYone Manual de usuario

Bea-fon

Bea-fon X5 Premium Manual de usuario

Blackbe;rry

Blackbe;rry 8707 Series Manual de usuario

Blackbe;rry

Blackbe;rry Storm Instrucciones de funcionamiento

LifeWatch

LifeWatch V Manual de usuario

Bea-fon

Bea-fon SILVER LINE SL860 Manual de usuario

IKI Mobile

IKI Mobile KF4.5i Manual de usuario

Hitech

Hitech HT-850 Manual de usuario

Yezz

Yezz Fashion F10 Manual de usuario

Point Mobile

Point Mobile PM60 Manual de usuario

Blackbe;rry

Blackbe;rry Q10 Manual de usuario

Blackbe;rry

Blackbe;rry Bold 9900 Manual de usuario

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manual de usuario

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manual de usuario

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Manual de usuario

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Manual de usuario