LG EX6100 Manual de usuario

CONTENTS 1

PHONE COMPONENTS 2

ONSCREEN ICONS 4

INSTALLING THE UIM CARD AND

BATTERY 5

Installing the UIM card 5

Removing the Battery 5

Charging the Battery 6

Battery Charge Level 6

BASIC FUNCTIONS 7

Turning the Phone On and Off 7

Changing the display language 7

Airplane Mode 7

Making a Call 8

Receiving Calls 8

CAMERA 9

PLAY FM RADIO 9

TRACKER 10

MENU TREE 11

ENTERING AND EDITING

INFORMATION 12

Entering Information Using T9 Text Input 12

Typing In T9Arab 13

MESSAGES 14

Write New 14

INTRODUCTION 16

MENU FEATURES 17

FUNCTIONS USED DURING A CALL 27

SAFETY INFORMATION 28

Charger and Adapter Safety 28

Battery Information and Care 28

General Notice 28

CONTENTS

EX6100_Slim_Eng_1014 10/14/08 6:38 PM Page 1

The following shows key components of your mobile phone.

PHONE COMPONENTS

1. Earpiece

2. Headset Jack

3. 4 Way Navigation Key

4. Soft Key1

5. CALL Key

6. Vibrate Mode Key

7. Microphone

8. LCD Screen

9. OK Key

10. Soft Key2/Clear

11. END/PWR Key

12. Alphanumeric Keypad

13. Key Guard

14. Charger Port

EX6100_Slim_Eng_1014 10/14/08 6:38 PM Page 2

LCD Screen Displays messages & indicator

icons.

Soft Keys The names of the functions, of these

keys appear on the bottom of the screen.

●Soft Key 1

Used to display the function setting menu.

Accepts the highlighted choice when

navigating through a menu.

●Soft Key 2/Clear

Used to search phonebook and clear a single

space or character. Go to previous menu.

During a call, activate speaker On/Off.

Send SMS on call reject during an incoming

call.

CALL Key Allows user to place or answer calls.

See and redial from call history.

END/PWR Key Used to turn power On/Off and

to end a call. Using this key, you can return to the

main menu display screen. When you press once,

when a call is received, the phone stops ringing or

vibrating depending on the mode it is in. Press

twice to reject the call.

Alphanumeric Keypad These keys enable

you to enter numbers and characters and choose

menu items.

Navigation Key This Navigation key allows

quick access Messages and Voice Mail

notification messages.

FM Radio, Ring Tone, Camera.

User Can access Write New,Speaker On/Off &

Camera Preview by pressing Up, OK & Right long

key respectively. My Menu can be accessed by

pressing OK key.

Vibrate Mode Key In standby mode, set the

vibrate mode by pressing and holding the key

about 2 seconds.

EX6100_Slim_Eng_1014 10/14/08 6:38 PM Page 3

The phone screen displays several onscreen icons which appear when the

phone is powered on.

ONSCREEN ICONS

Displays the strength of the signal

received by the phone and current

signal strength is indicated by the

number of bars displayed on the

screen.

No service.

The phone is not receiving a system

signal.

In use. A call is in progress.

* No icon indicates the phone is in

standby mode.

Charge level. Indicates battery charge

level.

Roaming mode.

In General mode.

In Silent mode.

In Alarm mode.

In Vibrate Only mode.

In Outdoor mode.

Indicates that a Text Message or Voice

Mail Messages has been received.

In Headset mode.

EX6100_Slim_Eng_1014 10/14/08 6:38 PM Page 4

Installing the UIM card

Your UIM card contains your phone number,

service details and contacts and must be

inserted into your handset. If your UIM card is

removed then your handset becomes unusable

until a valid one is inserted. Always disconnect

the charger and other accessories from your

handset before inserting and removing your

UIM card. Slide the UIM card into the UIM card holder. Make sure that the UIM card is

properly inserted and the gold contact area on the card is facing downwards. To remove

the UIM card, press down lightly and pull it in the reverse direction.

Note

The metal contact of the UIM card can easily be damaged by scratches. Pay special attention to

the UIM card while handling.

Removing the Battery

1. Turn off the phone, then move the battery

cover latch away from the battery cover to

release it.

2. Lift and remove the battery cover.

3. Lift the top of the battery out using the

fingertip cutouts, then remove it.

INSTALLING THE UIM CARD AND BATTERY

Slot Groove

EX6100_Slim_Eng_1014 10/14/08 6:38 PM Page 5

Charging the Battery

To use the AC adapter charger provided with your phone:

1. Plug the AC adapter into the electrical outlet.

2. Insert the micro USB charger of the adapter into the AC adapter jack on the

bottom of the phone. (Make sure the battery is installed.)

●As the phone charges, the battery icon continually displays a progression

from empty ( ) to full ( ).

It takes about five hours to fully recharge a completely rundown battery through

AC adaptor or through USB cable for laptops and PCs.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen.

When the battery charge level becomes low, the low battery sensor will alert

you in three ways: sounding an audible tone, blinking the battery icon outline,

and POP UP displaying Recharge the battery If the battery charge level

becomes exceedingly low, the phone will automatically switch off and any

function in progress will not be saved.

EX6100_Slim_Eng_1014 10/14/08 6:38 PM Page 6

Turning the Phone On and Off

1. Install a charged battery pack or connect the phone to an external power

source such as the AC adaptor.

2. Hold down the Key for 2 seconds until the LCD screen flashes.

Note As any other communication device, avoid any unnecessary contact with the antenna

while your phone is turned on.

Changing the display language

1. In standby mode, press Soft Key 1 Menu.

2. Press , .

3. Set

Français/ /English

with and then press Soft Key 1.

Airplane Mode

When your phone is in Airplane Mode, it cannot send or receive any calls or

access online information. You may use the phone’s other features, such as

Game, Scheduler, Memo, etc. When Airplane Mode is enabled, The message is

displayed on the screen “Airplane Mode”.

1. In standby mode, press Soft Key 1 Menu, , , .

2. Select On or Off and press Soft Key 1.

BASIC FUNCTIONS

EX6100_Slim_Eng_1014 10/14/08 6:38 PM Page 7

Making a Call

Every time you make a call, follow these steps:

1. Make sure that the phone is turned on. If not, hold down for 2 seconds.

2. Type the phone number and then press .

●If the phone is locked, press Soft Key 2 Unlock and type the 4 digits lock

code.

3. To end the call press .

Receiving Calls

1. When the phone rings or vibrate (if the Vibrate Mode is enabled), press any

key (except ) or depending on the Call setting.

●When you press once, when a call is received, the phone stops ringing

or vibrating depending on the mode it is in. Press twice to reject the

call.

2. To end an answered call, press .

3. If you are not in the condition to receive call, pressing

Soft Key 2

will send a

Preset SMS to Caller. The SMS can be editted using "Edit SMS on Call Reject"

function given under Settings' Call.

EX6100_Slim_Eng_1014 10/14/08 6:38 PM Page 8

Your multimedia phone comes with an easy-to-use built-in camera, which

allows you to instantly take, view, and share photos with your friends and family.

1. Press Menu,

, ,

to take pictures.

2. Select the options to customize.(Refer to page 22.)

Note

Press Short Key for Camera Menu.

CAMERA

1. Attach headset to the headset jack.

2. Press Menu + 8 Multimedia + 2 FM Radio + 1 Listen To Radio or Press in

idle mode.

3. Press Soft Key 1 for below Options:

GMain Screen Go to main screen.

GSwitch Off Switch off the FM Radio.

GEdit Channels Adjust and save channels manually.

GAuto Scanning Auto scan and save channels.

GReset All Reset all channels to default mode.

GListen Via Listen FM Radio via Speaker or Headset.

GSleep Timer Set the sleep time. (Off/15 Mins/30 Mins/60 Mins)

Note

Upto 12 channels can be configured.

PLAY FM RADIO

EX6100_Slim_Eng_1014 10/14/08 6:38 PM Page 9

The Mobile Tracker feature provides you the ability to have a Tracking System for

your mobile in case you lose or stolen by some one.

The moment a new RUIM is inserted with Tracker feature enabled, you will be

prompted to enter the Tracker code during boot-up. After 3 unsuccessful attempts

an SMS is triggered and is sent to your pre-defined numbers.

1. Soft Key 1 Menu, , , .

2. Enter tracker code.(Default is 0000.)

GAdd Numbers Add numbers to be informed in case you

lose or stolen by some one.(Up to 5, can be

saved.)

GEdit Message Edit message to be informed in case you

lose or stolen by some one.

GSet Tracker Select Enable/ Disable.

GChange Tracker Code Customize tracker code.

Note In case you want to use your phone with new RUIM.

●

It is recommended to do so by disabling the Tracker feature.

●

If the Tracker feature is not disabled you are prompted to input the Tracker code (Default

is “0000”) during phone boot-up.

●

If you don’t remember the Tracker code you can get the same by contacting the

predefined numbers.

TRACKER

EX6100_Slim_Eng_1014 10/14/08 6:38 PM Page 10

Tabla de contenidos

Manuales populares de Teléfono móvil de otras marcas

Zte

Zte BLADE A520 Manual de usuario

Nokia

Nokia Lumia 620 Manual de usuario

Blackbe;rry

Blackbe;rry KEYone Manual de usuario

Bea-fon

Bea-fon X5 Premium Manual de usuario

Blackbe;rry

Blackbe;rry 8707 Series Manual de usuario

Blackbe;rry

Blackbe;rry Storm Instrucciones de funcionamiento

LifeWatch

LifeWatch V Manual de usuario

Bea-fon

Bea-fon SILVER LINE SL860 Manual de usuario

IKI Mobile

IKI Mobile KF4.5i Manual de usuario

Hitech

Hitech HT-850 Manual de usuario

Yezz

Yezz Fashion F10 Manual de usuario

Point Mobile

Point Mobile PM60 Manual de usuario

Blackbe;rry

Blackbe;rry Q10 Manual de usuario

Blackbe;rry

Blackbe;rry Bold 9900 Manual de usuario

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manual de usuario

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manual de usuario

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Manual de usuario

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Manual de usuario