LG Innotek WL1NB6V2 Manual de usuario
User Manual
PRODUCT NAME : Wireless audio Module
MODEL NAME : WL1NB6V2
(00)-0073
The information contained herein is the exclusive property of LG Innotek
and shall not be distributed, reproduced or disclosed in whole or no in part
without prior written permission of LG Innotek.
User Manual
PAGE :
REG. DATE : 2020.07.30
REV. DATE : 2020.07.30
REV.NO : 1.0
©2015 LGIT. All rights reserved.
1/ 8
MODEL : ETWADYEC01(LGIT)
WL1NB6V2(LGE)
Table of Contents
No. Description Page
1Features 2
2Module Photo 2
3Block Diagram 3
4Storage Conditions 4
5Operating Conditions 4
6Interface Specification 5
7Pin Description 6
8Outline Drawing 7
9Packing Information 8
User Manual
PAGE :
REG. DATE : 2020.07.30
REV. DATE : 2020.07.30
REV.NO : 1.0
©2015 LGIT. All rights reserved.
2/ 8
MODEL : ETWADYEC01(LGIT)
WL1NB6V2(LGE)
2. Module Photo
1. Features
ETWADYEC01 is the small size and low power module for Wireless Audio.
ETWADYEC01 is based on Syncomm IA9Q.
5.2/5.8GHz GFSK Modulation
Size : 35mm x 35mm x 5.03 mm
Internal PCB Printed Antenna
I2S digital audio interface
I2C control with external device
Low audio delay time < 20ms
Application : Wireless Speaker, Woofer, TV Theater
<Top view> <Bottom view>
User Manual
PAGE :
REG. DATE : 2020.07.30
REV. DATE : 2020.07.30
REV.NO : 1.0
©2015 LGIT. All rights reserved.
3/ 8
MODEL : ETWADYEC01(LGIT)
WL1NB6V2(LGE)
3. Block Diagram
User Manual
PAGE :
REG. DATE : 2020.07.30
REV. DATE : 2020.07.30
REV.NO : 1.0
©2015 LGIT. All rights reserved.
4/ 8
MODEL : ETWADYEC01(LGIT)
WL1NB6V2(LGE)
4. Storage Conditions
5. Operating Conditions
Parameter Min Max Unit
Storage Temperature -10 +80 ℃
Storage Humidity (@ 40℃)-90 %
Caution : The specifications above the Table define levels at which permanent damage
to the device can occur. Function operation is not guaranteed under these conditions.
Operating at absolute maximum conditions for extend periods can adversely affect the
long-term reliability of the device.
•Other conditions
1) Do not use or store modules in the corrosive atmosphere, especially where chloride
gas, sulfide gas, acid, alkali, salt or the like are contained.
Also, avoid exposure to moisture.
2) Store the modules where the temperature
and relative humidity do not exceed 5 to 40℃and 20 to 60%.
Parameter Min Typ Max Unit
Ambient Temperature 0 - +60 ℃
Operating Humidity (40℃)- - 85 %
Supply Voltage 3.15 3.3 3.45 Vdc
User Manual
PAGE :
REG. DATE : 2020.07.30
REV. DATE : 2020.07.30
REV.NO : 1.0
©2015 LGIT. All rights reserved.
5/ 8
MODEL : ETWADYEC01(LGIT)
WL1NB6V2(LGE)
6. Interface Specification
1) I2S Timing
User Manual
PAGE :
REG. DATE : 2020.07.30
REV. DATE : 2020.07.30
REV.NO : 1.0
©2015 LGIT. All rights reserved.
6/ 8
MODEL : ETWADYEC01(LGIT)
WL1NB6V2(LGE)
7. Pin Description
Note.
1) Recommend a Module install sequence for prevent operation failure
-Supply 3.3V power
2) Connector: 26Pin SMD Connector
A
< TOP View > < Bottom View >
User Manual
PAGE :
REG. DATE : 2020.07.30
REV. DATE : 2020.07.30
REV.NO : 1.0
©2015 LGIT. All rights reserved.
7/ 8
MODEL : ETWADYEC01(LGIT)
WL1NB6V2(LGE)
8. Outline Drawing
User Manual
PAGE :
REG. DATE : 2020.07.30
REV. DATE : 2020.07.30
REV.NO : 1.0
©2015 LGIT. All rights reserved.
8/ 8
MODEL : ETWADYEC01(LGIT)
WL1NB6V2(LGE)
9. Packing Information
User Manual
PAGE :
DOCUMENT No :
REG. DATE : 2020.05.21 MODEL NAME: ETWCFMBC01(LGIT)
LGSBWAC95(LGE)
REV. DATE : 2020.05.21
REV.NO : V1.0
-
Copyrightⓒ. 2020. All Rights Reserved.
10 / 9
<Regulatory notice>
1. FCC Statement
FCC Part 15.19 Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Part 15.105 statement (Class B)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.21 statement
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
Responsible Party Information
Supplier's Declaration of Conformity
47 CFR §2.1077 Compliance Information
Responsible Party –U.S. Contact Information
LG Electronics USA
1000 Sylvan Avenue Englewood Cliffs
New Jersey, United States, 07632
Telephone number or internet contact information
Tabla de contenidos
