Lexmark X85x Manual de usuario

Lexmark™ X85x

Clearing Jams

Guide

Avoiding jams

The following hints can help you avoid jams:

•Use only recommended print media.

•Do not overload the print media sources. Make

sure the stack height does not exceed the

maximum height indicated by the stack line on

the labels in the sources.

•Do not load wrinkled, creased, damp, or curled

print media.

•Flex, fan, and straighten print media before you

load it. If jams do occur with print media, try

feeding one sheet at a time through the

multipurpose feeder.

•Do not use print media that you have cut or

trimmed yourself.

•Do not mix print media sizes, weights, or types

in the same print media source.

•Make sure the recommended print side is

loaded in the source according to your simplex

or duplex needs.

•Keep print media stored in an acceptable

environment.

•Do not remove trays during a print job.

•Push all trays in firmly after loading them.

•Make sure the guides in the trays are properly

positioned for the size of print media you have

loaded. Make sure the guides are not placed

too tightly against the stack of print media.

Clearing Jams

Understanding jam numbers

200–202 Jams

1Open Door A by pushing the release latch and

lowering the door.

CAUTION: The inside of the MFP might be hot.

2Pull the print media up and toward you.

Warning: If the print media does not move

immediately when you pull, stop

pulling. Push down and pull the

green lever to make it easier to

remove the media. Make sure all

paper fragments are removed.

3Close Door A.

4To u c h Continue.

Jam What to do

200–202 Jams Open Door A, and remove the

jam.

203 Jam Open the Door A and Door E,

and remove the jam.

230 Jam Open Door D, and remove the

jam. Open the Door A and Door

E, and remove the jam.

231 Jam Open Door D, and remove the

jam. Open the Door A and Door

E, and remove the jam.

24x Jams Open each tray, and remove any

jammed media.

250 Jam Remove all media from the

multipurpose feeder, flex and

stack the media, reload the

multipurpose feeder, and adjust

the guide.

280-288 Jams As directed by the message,

check area F, G, or H, then

remove the jam.

289 Jam Remove the staple cartridge,

then remove any jammed

staples.

290, 291, 292, and

294 Jams

Open the ADF cover and the

scanner cover, and remove any

jammed media.

293 Jam Select the location of your

original document, finish your job

without further scanning, restart

scanning, or cancel the job and

clear the message.

203 Jam

1Open Door A by pushing the release latch and

lowering the door.

CAUTION: The inside of the MFP might be hot.

2Open Door E by pushing the release latch and

lowering the door.

3Pull the print media up.

4Close Door E.

5Close Door A.

6Touch Continue.

230 Jam

1Open Door D by the duplex rear door.

2Remove the jammed media.

3Close Door D.

4Open Door A by pushing the release latch and

lowering the door.

CAUTION: The inside of the MFP might be hot.

5Open Door E by pushing the release latch and

lowering the door.

6Pull the print media up.

7Close Door E.

8Close Door A.

9To u c h Continue.

231 Jam

1Open Door D by the duplex rear door.

2Remove the jammed media.

3Close Door D.

4Open Door A by pushing the release latch and

lowering the door.

CAUTION: The inside of the MFP might be hot.

5Pull the print media up.

Warning: If the print media does not move

immediately when you pull, stop

pulling. Pull the green lever to make

it easier to remove the media. Make

sure all paper fragments are

removed.

6Close Door A.

7Touch Continue.

24x Jams

Paper jams in these areas can occur on the incline

surface of a tray or across more than one tray. To

clear these areas:

1Open the tray. If necessary, remove the tray

from the MFP.

2Remove the media from the MFP tray slot.

3Remove any crumpled paper from the tray.

4Insert the tray into the MFP.

5To u c h Continue.

250 Jam

1Remove the paper from the multipurpose

feeder.

2Flex, fan, and restack the media, and place it

into the multipurpose feeder.

3Load the print media.

4Slide the side guide toward the inside of the tray

until it lightly rests against the edge of the

media.

5To u c h Continue.

Clearing the 2000-sheet high capacity

feeder (Tray 5)

1If necessary, close the multipurpose feeder.

2Slide the high capacity feeder away from the

MFP.

3Raise the top door, and lift the jam access

cover.

4Remove the jammed paper.

5Close the jam access cover and top door.

6Slide the feeder firmly against the MFP.

7Touch Continue.

Clearing Area B

1If the MFP is configured with a 2000-sheet high

capacity feeder, slide the feeder away from the

MFP.

2Open Door B.

3Remove the jammed media.

4Close Door B.

5Slide the feeder firmly against the MFP.

6To u c h Continue.

Clearing Area C

1If the MFP is configured with a 2000-sheet high

capacity feeder, slide the feeder away from the

MFP.

2Open Door C.

3Remove the jammed media.

4Close Door C.

5Slide the feeder firmly against the MFP.

6Touch Continue.

280-288 Jams

These are finisher jams. Follow the appropriate

instructions to clear a jam in the finisher.

Clearing Area F

1Lift the bridge unit assembly door.

2Remove the jammed media.

3Close the door.

4Touch Continue.

Clearing Area G

1Open the finisher door.

2Remove the jammed media, as indicated on the

operator panel.

3Close the door.

4To u c h Continue.

Clearing Area H

1Lift Door H.

2Remove the jammed media.

3Close the door.

4To u c h Continue.

Clearing staple jams

289 Jam

1Check that the machine stops operations, and

open Door G (front door) of the finisher.

2Hold the lever on the staple cartridge holder,

and move the holder to the right (towards you).

3Firmly pull the colored tab to remove the staple

cartridge.

4Use the metal tab to lift the staple guard, and

then pull out the sheet of staples.

Discard the entire sheet.

5Remove any loose staples from the staple

guard.

6Look through the clear covering on the bottom

of the cartridge holder to make sure no staples

are jammed in the entry throat.

7Press down on the staple guard until it snaps

securely into place.

8Push the cartridge holder firmly into the stapler

until the holder clicks into place.

9Close Door G.

Priming Stapler appears on the operator

panel display. Priming ensures the stapler is

functioning properly.

Clearing ADF Jams

290, 291, 292, and 294 Jams

1Remove all original documents from the ADF.

2Lift the ADF cover latch.

3Open the ADF cover.

4Raise the sheet guard.

5Turn the paper advance wheel to the left to

remove any jammed pages.

6Close the ADF cover.

7Open the document cover, and remove any

jammed pages.

8Close the document cover.

9Touch Continue.

293 Jam

A 293 jam indicates the MFP was sent a scan job,

but found no original document in the ADF. To

resolve a 293 Jam:

•Touch Continue if no scan job is active when

the attendance message appears. This clears

the message.

•Touch Cancel Job if a scan job is processing

when the attendance message appears. This

cancels the job and clears the message.

•Touch Scan from Automatic Document Feeder

if the page jam recovery is active. Scanning

resumes from the ADF immediately after the

last successfully scanned page.

•Touch Scan from flatbed if page jam recovery is

active. Scanning resumes from the flatbed

immediately after the last successfully scanned

page.

•Touch Finish job without further scanning if

page jam recovery is active. The job ends at the

last successfully scanned page, but the job is

not canceled. Successfully scanned pages go

to their destination: copy, fax, e-mail, or FTP.

•To u c h Restart job if job recovery is active and

the job is restartable. The message clears. A

new scan job containing the same parameters

as the previous job starts.

Paper advance

wheel

Tabla de contenidos

Otros manuales de Impresora todo en uno de Lexmark

Lexmark

Lexmark X940E Manual de uso y cuidado

Lexmark

Lexmark Pro715 Manual de usuario

Lexmark

Lexmark X342n Manual de usuario

Lexmark

Lexmark XC4150 Manual de usuario

Lexmark

Lexmark 6200 Series Manual de usuario

Lexmark

Lexmark X500N Manual de usuario

Lexmark

Lexmark X84 Manual de usuario

Lexmark

Lexmark X646 Manual de usuario

Lexmark

Lexmark X792 Manual de usuario

Lexmark

Lexmark Impact S305 Manual de usuario

Lexmark

Lexmark Pro5500t Manual de usuario

Lexmark

Lexmark MX6500E Manual de usuario

Lexmark

Lexmark 2470 - X Color Inkjet Manual

Lexmark

Lexmark MS810 Series Manual de usuario

Lexmark

Lexmark W01 Manual de usuario

Lexmark

Lexmark X850e Manual de usuario

Lexmark

Lexmark MX81 series Manual de usuario

Lexmark

Lexmark X940E Instrucciones de instalación y mantenimiento

Lexmark

Lexmark CX942 Manual de usuario

Lexmark

Lexmark CX331 Manual de usuario

Lexmark

Lexmark X792de Manual de usuario

Lexmark

Lexmark C544N/DN/DW/DTN Manual de usuario

Lexmark

Lexmark x9350 Manual de usuario

Lexmark

Lexmark W812 Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Brother

Brother MFC-9760 Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario

Copystar

Copystar CS 4551ci Manual de usuario

Konica Minolta

Konica Minolta Magicolor 4650EN Manual de usuario

Brother

Brother MFC-9840CDW Manual de usuario