LevelOne IES-0852 Manual de usuario

IES-0852

4 x 802.3at PoE + 4 FE Web Smart Switch -40 to 75C, DIN-rail

User Manual

v1.00-1206

IES-0852 User Manual Page 2

Preface

This manual describes how to install and use the HardenedWeb-Smart PoE & High Power

PoE Ethernet Switch.This switch introduced hereis designed to deliver full scalability with

web-based management functions. Capable of operating at temperature extremes of

-40°C to +75°C, this is the switch of choice for harsh environments constrained by space.

Port 1 to port 4 on this switch supports IEEE802.3af Power over Ethernet (PoE) Power

Sourcing Equipment (PSE) and can detect an IEEE802.3af compliant Powered Device (PD).

Using external 48VDC power inputs throughTerminal Block or Power Jack, data and power

can be transmitted to aPowered Device (PD) over the same twisted-pair Ethernet cable

through port 1 to port 4 on the switch.

Port 1 to port 4 on this switch also supports High Power PoE Power Sourcing Equipment

(PSE) and can detect a Powered Device (PD). Using external 55VDC power inputs through

Terminal Block or Power Jack, data and power can be transmitted to a Powered Device (PD)

over the same twisted-pair Ethernet cable through port 1 to port 4 on the switch.

To get the most out of this manual, you should have an understanding of Ethernet

networking concepts.

In this manual, you will find:

Features on the HardenedWeb-Smart PoE Ethernet Switch

Illustrative LEDfunctions

Installation instructions

Management Configuration

Specifications

IES-0852 User Manual Page 3

Table of Contents

OVERVIEW...........................................................................................................................4

HARDENEDWEB-SMART POEETHERNET SWITCH..............................................................................................4

FEATURES...............................................................................................................................................................5

PACKAGE CONTENTS.............................................................................................................................................5

FRONT PANEL DISPLAY.........................................................................................................................................6

POWERINPUT........................................................................................................................................................7

DINRAIN MOUNT.................................................................................................................................................8

10/100BASE-TXCONNECTOR............................................................................................................................9

CONNECTINGTOYOUR NETWORK....................................................................................................................10

CableType&Length.............................................................................................................................10

Cabling.....................................................................................................................................................10

WEB MANAGEMENT .........................................................................................................11

DEFAULTSETTING ..............................................................................................................................................11

LOGGING ONTOTHE SWITCH.............................................................................................................................12

BROWSER INTERFACE .........................................................................................................................................13

PoE............................................................................................................................................................14

HighPowerPoEOperation.................................................................................................................15

PortBasedVLAN....................................................................................................................................16

Priority......................................................................................................................................................17

DiffServCodePoint..............................................................................................................................18

SystemSetup..........................................................................................................................................19

FirmwareUpgrade................................................................................................................................20

SPECIFICATIONS ...............................................................................................................21

IES-0852 User Manual Page 4

Overview

HardenedWeb-Smart PoE Ethernet Switch

LevelOne IES-0852 Industry Ethernet Switch provides 4 PoE ports of 10/100Base-TX plus 4

ports of 10/100Base-TX Ethernet to enable high speed network at mission-critical

environment.This device is designed to be mounted on an industry standard DIN-rail, plus

the clearly visible status LEDs provide simple monitoring of port link activity.

High Reliability

All components are built to withstand harsh environment applications without

compromise where humidity, temperature variation and even shock vibration are

concerns, including Electric & Utility, Critical Infrastructure,Transportation and

Surveillance Security.This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit)

temperature.

Web Management

Web-based GUI management features implementation of Port-basedVLAN, IEEE802.1p

QoS, Prioritised DSCP, set up Admin Password with ease.Plus, the Power over Ethernet

ports can be On / Off and limits the powerbudget remotely

Power over Ethernet

This switch is Power Sourcing Equipment (PSE), and it is fully complied with IEEE 802.3at

PoE standard at maximum 30W powerbudget per port. It helps to save infrastructure

wiring costs dramatically by eliminating electric wiring and less UPS needed. Also, it is

compatible with IEEE802.3af standard PD devices.

Safety

This device has been tested under UL508 standard for Industrial Control Equipment to

endurance under test turn on and

highly reliability and safety measurement to ensure field hardened,especially for the harsh

environment.

IES-0852 User Manual Page 5

Features

Complies with NEMATS1/TS2 Environmental requirements such as temperature, shock,

and vibration for traffic control equipment.

Complies with EN61000-6-2 & EN61000-6-3 EMC Generic standard immunity for

Industrial environment.

Manageable viaWeb browser interface.

Supports IEEE802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE).

High Power PoE design up to 30W (enhancement of IEEE802.3af PoE).

Supports IEEE802.3/802.3u/802.3x.Auto-negotiation: 10/100Mbps-full/half-duplex;

Auto MDI/MDIX.

100Base-FX: Multi mode SC or ST type, Single mode SC or ST type. 100Base-BX:WDM

Single mode SC type.

Supports 1024 MAC addresses.Provides 1M bits memory buffer.

Store-and-forward mechanism.

Full wire-speed forwarding rate.

Alarms forpower and port link failure by relay output.

PoE: Redundant 48VDCTerminal Block power inputs and 48VDC DC JACK power input

for 15.4W per PoE port. Operating voltage and Max. current consumption: 1.5A @

48VDC. Powerconsumption: 72W Max.

High Power PoE: Redundant 55VDCTerminal Block power inputs and 55VDC DC JACK

power input for 30W per High Power PoE port. Operating voltage and Max. current

consumption: 2.3A @ 55VDC. Power consumption: 130W Max.

-40℃to 75℃(-40℉to 167℉) operating temperature range.Tested for functional

operation @ -40℃to 85℃(-40℉to 185℉).Web-Smart function operating temperature

@-20℃to85℃(-4℉to 185℉).

Reset button on front panel.

Front panel port status LEDs.

Hardened aluminum case.

Supports DIN-Rail, Panel, or Rack Mounting installation.

Package Contents

When you unpack the product package, you shall find the items listed below. Please

inspect the contents,and report any apparent damage or missing items immediately to

your authorized reseller.

IES-0852 HardenedWeb-Smart High Power PoE Ethernet Switch

Quick Installation Guide

CDUserManual

IES-0852 User Manual Page 6

Front Panel Display

LED

Status

Description

PW 1,2,3

Steady

Power On

Off

Power Off

10/100Base-TX or 100Base-FX/BX

LNK/ACT

Steady

Network connection is established

Flashing

Transmitting or Receiving data

PoE

(High Power)

Steady

Power Device (PD) is connected

Off

Power Device (PD) is disconnected

IES-0852 User Manual Page 7

Power Input

Terminal Block

PW1

48, 55VDC (High Power)

PowerGround

PW2

48, 55VDC (High Power)

PowerGround

PW3

DC Jack

48, 55VDC (High Power)

Earth Ground

Relay Output

0.1A @ 24VDC

*Warning signal disable for following:

1. The relay contact closes if Power1 and Power2 are both failed but Power3

on.

2. The relay contact closes if Power3 is failed but Power1 and Power2 are

both on.

DC Jack

PW3

DC Jack

48, 55VDC (High Power)

Special Note:

The relay output is normal open position when there is no power to the switch. Please do

not connect any power sourceto this terminal to prevent shorting your powersupply.

IES-0852 User Manual Page 8

DIN rain Mount

Fix the DIN rail attachment plate to the back panel of the switch.

Installation: Place the switch on the DIN rail from above using the slot. Push the front of

the switch toward the mounting surface until it audibly snaps into place.

Removal: Pull out the loweredge and then remove theswitch from the DIN rail.

IES-0852 User Manual Page 9

10/100Base-TX Connector

The following lists the pin-out of 10/100Base-TX ports.

PoE Port (1 to 4)

Standard Port (5)

OutputTransmit Data +

Input Receive Data +

OutputTransmit Data -

Input Receive Data -

Input Receive Data +

OutputTransmit Data +

Positive (VCC+)

Input Receive Data -

OutputTransmit Data -

Negative (VCC-)

IES-0852 User Manual Page 10

Connecting toYour Network

Cable Type & Length

It is necessary to follow the cable specifications below when connecting the switch to your

network. Use appropriate cables that meet your speed and cabling requirements.

Cable Specifications

Speed

Connector

Port Speed

Half/Full Duplex

Cable

Max.

Distance

10Base-T

RJ-45

10/20 Mbps

2-pair UTP/STP

Cat. 3, 4, 5

100 m

100Base-TX

RJ-45

100/200 Mbps

2-pair UTP/STP

Cat. 5

100 m

100Base-FX

ST, SC

100/200 Mbps

MMF (50 or

2 km

100Base-FX

ST, SC

100/200 Mbps

20, 40, or 75

Cabling

Step 1: First, ensure the power of the switch and end devices are turned off.

<Note> Always ensure that the power is off before any installation.

Step 2:Prepare cable with corresponding connectors for each type of port in use.

Step 3: Consult Cable Specifications Table on previous page for cabling requirements

based on connectors and speed.

Step 4:Connect one end of the cable to the switch and the other end to adesired device.

Step 5: Once the connections between two end devices are made successfully, turn on the

power andthe switch is operational.

Tabla de contenidos

Otros manuales de Interruptor inteligente de LevelOne

LevelOne

LevelOne Infinity IES-0841 Manual de usuario

Manuales populares de Interruptor inteligente de otras marcas

D-Link

D-Link DGS-1210-20 Manual de usuario