Leotec LEPFITF01 Manual de usuario
User manual
LEPFITF01 smart bracelet
Thank you for purchasing our device. Before using please read following
user manual.
1.
Quick Start
1.1
Warning
Before start any new sport activity please consult your doctor.
Smart bracelet can monitor real time dynamic heart rate
but it can’t be used for any medical purposes. Please be sure to consult your
doctor before any exercise and diet plan.
1.2
System requirements
Device support Android 4.4, iOS 8.0, bluetooth 4.0 and above.
1.3
How to charge battery
Before start using device please be sure battery is charged.
For charging please use provided charging clip.
Please make sure that charging clips 2 spring connectors are well aligned with
2 charging pins on back of shell.
Then please connect USB cable with USB adaptor. Please use 5V 500mA
adaptor. If clip is connected well with device after connecting adaptor you will
see battery charging icon on device screen.
To avoid any problems with charging please make sure that metal pins on
back shell are without dirt, oxidation or impurities.
If device is not used for longer time please charge battery every 3 months.
Do not use adapter over 2A. It may damage device.
1.4
Environment
Please don’t wear device when taking hot shower or bath.
Don’t use device in very high temperature environment.
It will damage device hardware.
1.5
How to use charging clip
Charging clip
should be fasten
from right side of
device
Charging clips 2 spring connectors
need well aligned with 2 charging pins
on back of shell
1.6
Initial using instruction
-
Before initial use of device please press touch key at the bottom of the
screen for 5 seconds to turn on device.
-
If device didn’t power on please check whether device has run out of power
or not. If needed please charge battery first.
-
After device power on please connect it with FunDo APP to synchronize
time, date and weather forecast.
Tip! Please remember to turn on bluetooth in your phone. Do not connect
device at mobile phone bluetooth interface directly.
Please use APP for pairing.
1.7
How to wear device
-
Take out device from box. Wear it around your wrist and adjust it for
comfortable size.
-
Fix device fastener. Sensor on back of shell should be close to your skin.
It shoudn’t move in order to keep accurate measurement of sensor.
-
For more accurate measurement it is recommended to wear device
around 1 cm behind the ulnar styloid joint.
1.8
Device appearance
Charging pins
Screen
Red touch
Heart beat
sensor
key Belt quick
release
spring bars
2.
Functions introduction
2.1
Main screen interface
Main screen will show time, date, battery level, bluetooth
connection status, temperature and weather icon.
Please remember to pair device with APP by bluetooth to
synchronize data.
If you want switch to other functions simply short press red
key on botton of screen. Please repeat to select all functions.
After last function device will show ones again main screen.
2.2
Steps
Function shows amount of steps you made today.
Please be noted that each 12am time device will reset steps
amount to zero to start count for new day.
2.3
Distance
Function shows distance in kilometers or miles you made
today.
Please be noted that each 12am time device will reset
distance amount to zero to start count for new day.
You can change kilometers/miles parameter in APK.
2.4
Burnt callories
Function shows amount of burnt callories connected with
amount of steps you made today.
Please be noted that each 12am time device will reset burnt
calories amount to zero to start count for new day.
If distance is in kilometers function will show burnt callories
in kcal.
If distance is in miles function will show burnt callories in kJ.
You can change kilometers/miles parameter in APK.
2.5
Healthy
Please select Healthy function then long press touch key o
bottom of screen.
Healthy function includes heart beat monitor, blood pressure
and oxygen level test. You can switch between function
by short press red touch key on bottom of screen.
If you select one of tests simply just wait till result will be shown.
Test is in progress when icon is shown.
Heartbeat rate
Enter to Healthy function then short press red touch key.
Device will start measurement of heartbeat rate.
Test is in progress when icon is shown.
Please be noted that device support dynamic heartbeat test.
It will continously show result. If you want finish test, simply
press red touch key. Test will be stoped.
Tips!
-
For more accurate result please wear device around 1cm
above ulnar styloid joint.
-
When hart rate is measured please keep device close to skin
that sensor can have better contact.
-
If device is too loose and light sensor is not close to skin result
will be inaccurate.
-
Please don’t look at the green light sensor. It can cause
discomfort in your eyes.
-
Although device can be used for real time and dynamic heart
rate detection it is suggested to take short rest during test.
-If there is a big difference between measured result, please
repeat test ones again.
Avarage of 5 times of continous measurement will be more accurate.
-
Speaking, eating, drinking, dramatic moves can affect measurement.
-
Skin color, hair density tattos, scars etc can affect result.
WARNING: This product is not "Medical" Device, it cannot use for diagnosis,
treatments or prevent of disease. Result is just for reference.
Blood pressure test
Enter to Healthy function then 2 times
short press red touch key.
Device will start measurement of blood
pressure automaticly.
When test is finished device will vibrate
and result will be shown on screen.
Normal systolic blood pressure level: 90-140 mmHg
Normal diastolic blood pressure level: 60-90 mmHg
WARNING: This product is not "Medical" Device, it cannot use for diagnosis,
treatments or prevent of disease. Result is just for reference.
Oxygen level test
Enter to Healthy function then 3 times
short press red touch key. Device will start
measurement of oxygen level automaticly.
When test will be finished device will
vibrate and result will be shown on screen.
Normal oxygen level value is around 95% to 98%.
WARNING: This product is not "Medical" Device, it cannot use for diagnosis,
treatments or prevent of disease. Result is just for reference.
2.6
Sleep monitoring
Device is monitoring deep sleep, light sleep and sleep duration.
It is easy to know the quality of sleep and length of each sleep
stage.
When device is power on sleep monitoring is enable.
Device is set to monitor sleep from 10pm to 8am.
After this period device will show last night data on screen.
Please synchronize device with APP for data analyzing.
2.7
Sports
Device has 9 sport modes.
Walk, Run, Cycling, Basketball, Swim, Table tennis, Badminton,
Climb, Soccer.
How to choose sport mode
Please select Sports function. Then long press red touch key.
Now you can select desired sport mode by short press red touch key.
To confirm mode please long press touch key. After it function will be activated.
When mode is on by short press of red touch key you can monitor your progress.
Device is showing duration of exercise, burnt calories, heart beat rate,
time when excercise was started and amount of steps from start.
To stop and save data of your exercise please long press 2 times red touch key.
After connecting device with your phone all activities data will be saved on APP.
2.8
News
Device will keep you informed about incoming calls, SMS.
Stay connected with third party APP notifications. You can
select which you want receive on APP.
It's up to you.
Device support QQ, Wechat, WhatsApp, Messanger, Twitter,
LinkedIn, Instagram.
To enter please long press red touch key on NEWS interface.
You can switch between messages by short press red touch key.
Tip!
Device can store only 7 messages. After device reach limit, previously displayed
messages will be replaced one by one.
Tabla de contenidos
