Lenovo px2-300d Manual de usuario
Page%|%1%
%
Lenovo EMC px2-300d & px4-300d NVR
Milestone Arcus User Guide
August 6, 2013
Page%|%2%
%
Index
Getting Started 3
Log In 3
Enabling Security 4-6
Enabling Email Notifications 6-7
Discover Cameras 7-8
Camera License Activation 9
Configure Cameras 10-12
General 12
Video 13
Recording 14
Motion Detection 15
Live View 16-17
Pan, Tilt, Zoom Controls 18
Search and Playback 19-20
Export Video 21-22
Update Software 23-25
Technical Support Information 25
Click here to download a PDF version of the User Guide.
Page%|%3%
%
Getting Started
Before using the Arcus software, make sure that the Lenovo EMC NVR is properly connected to the
network. For more details about setting up and connecting the appliance, please see the Lenovo
EMC NVR Quick Start Guide.
To begin using Arcus, open a web browser. In the URL box, type in the IP address shown in the
LCD window of the LenovoEMC NVR unit and hit enter.For example, the IP address of this unit
is 147.178.15.43, so the web address of the user interface will be 147.178.15.43.
Tip: The IP address of the LenovoEMC NVR is shown in the LCD screen on the front of the unit
Log In
Once you have entered the IP address and hit enter, you will be directed to the login screen of the
Arcus software. At this point you will be prompted to log in to the Arcus software. If this is the first
time anyone has logged into the box and security isn’t enabled, just hit the Log In button, no
password is needed until security is enabled.
Page%|%4%
%
Enabling Security
To enable security go to the screen above and click on the Manage button in the upper right hand
corner of the screen, see the red arrow.
Page%|%5%
%
On the left-hand side menu go to the System Icon and click on it, Look for the Security Icon with a
Key on a shield and click on it.
After clicking on the Security Icon the screen below will appear, minimally all you need to do is
create a user name and password and click the Apply button at the bottom of the section.
Page%|%6%
%
Please read the next Warning window and make sure your OK or make the appropriate changes!
Enabling Email Notifications
On the left-hand side menu go to the System Icon and click on it, Look for the Email Notification and
click on it.
Page%|%7%
%
If the LenovoEMC Network Video Recorder detects a problem, an email message will be sent to the
addresses supplied here. If multiple email addresses are listed they will all receive notification
messages, Check Send a test email message to validate the email notification. A test message will
be sent to all the listed email addresses when you click Apply. Check Additional credentials required
only if you need to use an alternate email server, enter the appropriate credentials.
Discover Cameras
Once you have logged into the software, the cameras connected on your network will
automatically appear on the home screen. If properly connected, your home screen should look
something like this: If your camera is properly connected but does not show up on the screen, it is
possible to manually make the connection. This option can be found by clicking on the settings tab
that will bring up the screen seen below.
Page%|%8%
%
Once you arrive at the settings screen you will see a magnifying glass icon that says “Is your
camera not listed?” (Note the Red Arrow)
When you click on this link, a box will appear (see the image below) asking you to type in the IP
address of the camera, as well as the camera username and password. Once you have completed
these steps the camera will be connected and will appear on the home screen.
Page%|%9%
%
Camera License Activation
Camera licenses are automatically applied to cameras and activated by the LenovoEMC NRV
device. If your NVR device is not on a network with internet access, the licenses will need to be
manually activated. From the settings tab click on “manual activation” on the lower right side.(see
the red error) This will walk you through the 3 steps to manually activate your camera licenses.
1. Click Generate, this will create a request.lrq file.
2. Click on the Milestone Arcus Activation URL then follow the directions
3. Once you’ve received the file back from Milestone, click the Select File button and browse to
the downloaded file to install..
Page%|%10%
%
Configure Cameras
You can find the configuration options for your cameras by clicking on the Settings tab in the
upper right corner of the Home page. The number on the Settings tab indicates the number of
cameras newly connected to the LenovoEMC NVR device that have yet to be configured. It could
also indicate a notification of something that has changed or needs attention.
Once you are at the settings page you will see a list of all of your connected cameras. If a camera
does not show up, check to be sure that your system is properly connected (see the LenovoEMC
Quick Start guide). If all cameras are connected but one still does not show up, see the section of
this guide pertaining to discovering cameras.
Tip: Newly connected cameras have a green bar over their video feed that reads Recently Added,
letting you know that they have been discovered and are using a default configuration (see below).
Otros manuales para px2-300d
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
