LENCO L-84 Manual de usuario
MODEL: L-84
Turntable with USB connection
Quick guide
www.lenco.com
2
OPERATION
1.What’s in the box, 1Xturntable, 1Xdust cover, 2Xhinge, 1Xbuilt-in RCA
cable, 1Xsingle puck, 1XAC to DC adaptor
2. Select the speed for the record to be played by setting the speed select
button.
3. Place a record on the turntable platter. Place the 45 rpm record adapter
over the turntable shaft when playing a doughnut style record which has a
large diameter center hold.
4. Remove the stylus protector cover and release tonearm clip.
5. Move the cueing lever to the up position, then move tonearm toward the
record. The turntable will start revolving.
6. Position the tonearm above the first groove of the record and move the
cueing lever to the down position, the tonearm will come down gently onto
the record surface automatically.
7. At the end of the record, put the tonearm back to the arm rest and
switch off the power switch on the rear panel.
IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE.
This symbol indicates that there are important operating
maintenance instructions in the user manual
accompanying this unit.
This symbol indicates that dangerous voltage is present
within this unit, constituting a risk of electric shock or
personal injury.
CAUTION: TO PREVENT AN ELECTRICAL SHOCK, DO NOT REMOVE
ANY COVER SCREWS. THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REQUEST A QUALIFIED SERVICE PERSON TO PERFORM
SERVICING.
3
Keep these instructions in mind:
Do not use this device near water.
Clean only with a slightly damp cloth.
Do not cover or block any ventilation opening. When placing the device
on a shelf, leave 5 cm (2”) free space around the whole device.
Install in accordance with the supplied user manual.
Don’t step on or pinch the power adaptor. Be very careful, particularly
near the plugs and the cable’s exit point. Do not place heavy items on
the power adaptor, which may damage it. Keep the entire device out of
children’s reach! When playing with the power cable, they can
seriously injure themselves.
Unplug this device during lightning storms or when unused for a long
period.
Keep the device away from heat sources such as radiators, heaters,
stoves, candles and other heat-generating products.
Avoid using the device near strong magnetic fields.
ESD can disturb normal usage of this device. If so, simply reset and
restart the device following the instruction manual. During file
transmission, please handle with care and operate in a static-free
environment.
WARNING! Never insert an object into the product through the vents
or openings. High voltage flows thru the product and inserting an
object can cause electric shock and/or short circuit internal parts. For
the same reason, do not spill water or liquid on the product.
Do NOT use in wet or moist areas such as bathrooms, steamy
kitchens or near swimming pools.
Do not use this device when condensation may occur.
MAINS plug is used as the disconnect device, the disconnect device
shall remain readily operable.
Power supply adaptor
Manufacturer : Hon-Kwang
Model number : HK-S-120A030-EU
Use only the power supply listed in the user instructions
4
Service and support
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
Germany 0900-1520530 (Local charges)
The Netherlands 0900-23553626(Local charges + 1ct p/min)
Belgium 02-6200115 (Local charges)
France 03-81484280 (Local charges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
When contacting Lenco, you will always be asked for the model and serial
number of your product. The serial number can be found on the back of
the device. Please write down the serial number below:
Model: L-84
Serial number:_________________________________
Lenco offers service and warranty in accordance to European law, which
means that in case of repairs (both during and after the warranty period)
you should contact your local dealer.
Important note: It is not possible to send products that need repairs to
Lenco directly.
Important note: If this unit is opened or accessed by a non-official service
center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional
use, all warranty obligations of the manufacturer will be voided.
5
Products with the CE marking comply with the EMC
Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission
of the European Community.
The declaration of conformity may be consulted at
https://lencosupport.zendesk.com/forums/22413161-CE-Documents
This symbol indicates that the relevant
electrical product or battery should not be
disposed of as general household waste in
Europe. To ensure the correct waste
treatment of the product and battery, please
dispose them in accordance to any applicable
local laws of requirement for disposal of
electrical equipment or batteries. In so doing,
you will help to conserve natural resources and improve
standards of environmental protection in treatment and
disposal of electrical waste (Waste Electrical and Electronic
Equipment Directive).
®All rights reserved
Tabla de contenidos
Otros manuales de Placa giratoria de LENCO
LENCO
LENCO LS-101BK Manual de usuario
LENCO
LENCO L-83 Manual de usuario
LENCO
LENCO Classic Phono TT-115 Manual de usuario
LENCO
LENCO LBT-188 Manual de usuario
LENCO
LENCO LS-10 Manual de usuario
LENCO
LENCO TCD-974 Manual de usuario
LENCO
LENCO Classic Phono TCD-2600 Manual de usuario
LENCO
LENCO L-81 USB Manual de usuario
LENCO
LENCO L-86 Manual de usuario
LENCO
LENCO LBT-188 Manual de usuario
LENCO
LENCO LBT-120BK Manual de usuario
LENCO
LENCO LS-55 Manual de usuario
LENCO
LENCO Classic Phono TCD-2570WD Manual de usuario
LENCO
LENCO Xemio-560 Manual de usuario
LENCO
LENCO L-78 Manual de usuario
LENCO
LENCO LS-50 Manual de usuario
LENCO
LENCO LS-430 Manual de usuario
LENCO
LENCO Classic Phono TCD-2570 Manual de usuario
LENCO
LENCO LS-430BK Manual de usuario
LENCO
LENCO LS-40 Manual de usuario
