LEITZ ICON Manual de usuario
Quick Start Guide for iOS
1
Unpacking the Leitz Icon Printer
Check that the items below are included in your printer package. If any of these items are missing
or damaged, visit www.leitz.com/icon to contact Customer Support.
Getting to Know the Printer
Installing the Leitz Icon App
Visit the Leitz website at www.leitz.com/icon to download the latest version of the Leitz Icon app
for iOS.
Connecting the Power
The printer is powered using the included AC power adapter and power cord.
1. Plug the power cord into the power
adapter.
2. Plug the power adapter into the power
connector on the back of the printer.
3. Plug the power cord into an available
power outlet.
An optional, external, rechargeable battery
is available for using the printer as a
portable device. Refer to the Leitz Icon
Printer User Guide (available at
www.leitz.com/icon) for information on
using the optional battery.
ALeitz Icon printer DCleaning card GUSB cable
BStarter label cartridge EPower adapter
CWarranty leaflet FPower cord
AFeed button EWireless status light IBattery connector
BCutter button FLabel exit slot JUSB connector
CCartridge door button GLabel guide latch/platen release KPower connector
DPower status light HLabel compartment LWi-Fi Protected Setup (WPS) button
A
D
B
C
E
F
G
B
A
E
F
H
G
D
C
JK
I
L
2
Connecting the Printer to Your iOS Device
On initial setup, and later, in the absence of a recognized network, your printer will switch to what is
known as "Soft AP" mode, where the printer creates it's own Wi-Fi network for wireless printing.
When connecting your printer to an existing network, you will use Soft AP mode to connect to the
printer and select the home or office network to which you want the printer to be attached. Later, if
you move the printer to another location where the network is not available, the printer will switch
back to Soft AP mode so you can connect to it and print using its own broadcast network.
Connecting the Printer to Your Network
1. On your iOS device, search for available wireless networks.
2. From the list of available networks, select your Printer ID.
The Printer ID is formatted as ICON-xxyyzz and can be found on the label on the bottom of
your printer.
3. Once connected, start a web browser on your iOS device.
4. In the address bar, type 192.168.1.1 and then press Enter.
5. Enter your user name and password in the User name and Password boxes.
The default user name and password are as follows.
User name: admin
Password: password
You can change this user name and password at any time; see the Leitz Icon Printer User
Guide for more information.
6. Click OK.
The Leitz Icon Control Panel is displayed.
7. Click Wi-Fi Setup Wizard.
8. Click Connect to Existing Network.
The Select Your Wireless Network page is displayed.
9. Select your wireless network in the Available Networks list.
10.If prompted, enter your network password and then click OK.
11.Click Next.
The Connection Settings page is displayed with the most common, default setting selected.
12.Unless you are performing an advanced installation needing a specific static IP address,
click Next to use the default settings.
13.On the Confirm & Connect page, click Connect.
As the printer connects to the selected network, you may hear a noise as the printer resets. At
the same time, the wireless connection from your computer to the printer is dropped and you
will need to reconnect your computer to your wireless network.
14.Close the Leitz Icon Control Panel.
NOTE If the label on the bottom of your printer does not contain the Printer ID, you can determine the
Printer ID using the printer’s MAC address. In this case, the Printer ID is formatted as ICON-
xxyyzz, where xxyyzz is the last six characters of your printer’s MAC address (found on the label
on the bottom of your printer). For example, if your printer’s MAC address is
MAC:00:1E:CO:13:13:A5, the Printer ID is ICON-1313A5.
3
Getting to Know the Label Cartridge
Leitz Icon Intelligent Label Cartridges are easy to load into the printer and are recyclable*. Each
cartridge has a folding label guide that opens to load and print labels and closes to protect labels
during storage. The Intelligent Label Cartridge uses a special cartridge identification chip to relay
information about the label cartridge, such as the type and size of the labels, the capacity of the
label cartridge, and the number of labels remaining, to the software.
*Intelligent Label Cartridges may not be recyclable in your area.
Loading Labels
AFolding label guide BLabel exit slot CCartridge identification chip
NOTE Avoid handling the cartridge identification chip as this may damage the chip. If the chip becomes
damaged, the label cartridge may not work properly.
A
B
C
1. Push the button on the top of the printer to
open the cartridge door.
2. Lift the label guide latch as shown.
3. Pull open the folding label guide on the
label cartridge until it locks into place.
4. Place the cartridge into the printer as
shown. Make sure the cartridge is
centered and seated securely in the
printer.
5. Lower the label guide latch.
6. Close the cartridge door.
The printer automatically feeds the labels
to the starting position.
NOTE Avoid handling the cartridge
identification chip as this may
damage the chip. If the chip becomes
damaged, the label cartridge may not
work properly.
4
Getting to Know the Leitz Icon App Printing Labels
Using the Leitz Icon printer, you can print a wide variety of adhesive labels as well as non-adhesive
name badges, notes, and appointment cards.
This section describes how to print a basic Address label.
1. Tap to start the Leitz Icon App.
2. Tap in the upper-left corner of the app.
3. Ta p Address on the Labels & Templates pane.
4. Ta p Address Label.
The label selection pane expands to display the available types of Address labels.
5. Ta p t h e Address label.
The label selection pane collapses and an Address label is displayed.
6. Double-tap the displayed label to edit the text.
7. Type an address or other text on the label.
8. If desired, tap to change the text formatting.
9. Tap , and then tap Print to print the label.
Additional Information
Visit the Leitz website at www.leitz.com/icon for additional information, including the latest
software, firmware, user guides, news, and FAQs.
AView your contacts and select
contacts to print labels for ESave labels and view
app settings HView the Leitz Icon App Help for
instructions on using the app
BEdit the label
F
Add addresses, text, counters,
the date and time, barcodes,
shapes, or images
IZoom the displayed label
CLock/unlock label design JSelect a printer and print labels
DSelect the label category, type,
and template GFormat objects and customize
object properties
C
B
I
F
G
A
E
D
J
H
Copyright
© 2014 Esselte IPR AB. All rights reserved.
Leitz, Leitz Icon, Smart Labeling System, Intelligent Label Cartridge are trademarks of Esselte IPR AB or its affiliates.
Mac and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under
license to Apple.
Revised 10/2014
Otros manuales para ICON
6
Tabla de contenidos
Otros manuales de Impresora de LEITZ
