Leicke APPLOID S8+ Manual de usuario
User manual
Smartwatch
For Smartphones with Bluetooth
Product number: WD67269
power
Congratulations on the purchase of your new device. Before using the device,
please make sure that the following items are included in the package:
Quantity
Accessories
Note
1
Smartwatch
-
2
Additional bracelet
Black & Grey
1
Wireless Charging
-
1
User manual
-
TECHNICHAL SPECIFICATIONS
Size of dial:
44,5 x 38 x 11,5 mm
Bracelet length:
270mm
Screen:
1.92 inches TFT
Weight:
40 g
Standby time:
Up to 6 days of continuous operation
(standby: 20 days).
System requirements:
iOS 10.0 or above, Android 6.0 or
above, Bluetooth 5 . 1
Waterproof:
IP67
Battery:
Integrated Rechargeable Lithium Battery
Ambient temperature:
0-40℃"
Frequency band
UHF-Frequenzband
Max. Transmitting
1,56 mW
PACKAGE CONTENT
To charge the Smartwatch, put the back side of Smartwatch connect the
appropriate wireless charging.
SCHEMATIC VIEW OF THE MAIN BODY OF THE SMARTWATCH
Switch on
1. Download and installation of the APP
1.1 Scan the QR code to download the APP with the mobile phone.
For Android For iOS
1.2 Select RD Fit for the IOS system in the App Store search.
For the Android system, select and install the RD Fit app in the Playstore
for download or scan the QR Code for download
Note: Your mobile phone must support Android 6.0 or IOS 10.0 or higher
and Bluetooth 4.0 or higher.
DOWNLOAD OF THE APP AND CONNECTION OF THE SMARTWATCH
2. Connection of the Smartwatch to the app
2.1 Click "Add Device" to pair the Smartwatch. (P.2)
2.2 Click your Device WD67269 in scanned list. The device confirm and pair it
with Android system directly. (P.3)
2.3 The IOS system displays a Bluetooth pairing request and you can click
Bluetooth "Pairing" to confirm (P.3 to P.4)
2.4 When "WD67269" Successfully connected, the system will automatically
pop up a prompt. (P.6) (Tips: If there isn't prompt, please go to TIPS)
2.5 Press the long button on the side of watch, swipe down on the main page,
pull down the page, and check that the icon is enabled on the page. (P.7)
2.6 Click "WD67269 Call" on the mobile phone to connect to the call. (P.8)
2.7 Successfully connected. (P.9)
TIPS:
* If it is in operation, there is no pop-up the prompt.
Please connect according to Step 2.6 to 2.7.
* If the watch has been connected to another mobile phone, please enter
that phone's Bluetooth settings of the mobile phone, clear the Bluetooth
record of the watch and then reconnect to the new mobile phone to avoid
confusion in the Bluetooth connection.
P1 P2 P3
WD67269
P4 P5 P6
P7 P8 P9
WD67269
WD67269
WD67269
WD67269
WD67269
WD67266
WD67269
WD67269
In the power-on state, you can switch the menu interfaces of the main screen
and display the user interfaces shown below:
STEPS
The step-counting interface shows steps. Wear the smart bracelet on wrist, and
the smart bracelet can automatically count steps, distance and calories.
MESSAGE
You can view the content pushed by the message in the information interface. At
most three messages can be saved. After three messages are saved, the
messages displayed before will be replaced by new messages one by one. In
the information interface, press and hold for 2 seconds to delete the content.
SLEEP
Wearing the smart bracelet at night to automatically judge whether you are in the
sleep state, to record deep sleep and light sleep respectively, and to summarize
the total sleep time to help you monitor your sleep quality. The sensor can
measure your sleep quality according to the range and frequency of wrist
movements when you sleep.
Note: Because users’ sleep time and habits are different, the time of sleep
monitoring is only for reference.
Heart Rate Measurement
Enter the heart rate test interface, the motor will vibrate once after “ Start
measurement” and “ Stop”, and the current measurement data will be
displayed.
TRAINING
There are many kinds of sports in the sports interface, including walking,
running, cycling, rope skipping, badminton, basketball and football etc..
INTRODUCTION TO THE FUNCTIONS OF THE SMARTWATCH
WEATHER
The weather page displays the current weather and tomorrow' s weather, and
slide right to show the weather forecast for the next 4 days.
For weather information, it needs to connect with the client end before data can
be obtained. If the disconnection time is long, the weather information cannot be
updated.
MUSIC
After connecting with the mobile phone, the smart bracelet can control the music
player of the mobile phone. When the mobile phone plays music, you can use
the smart bracelet to control the mobile phone for playing/pausing, the previous
song and the next song.
BRIGHTNESS
Click the icon to select screen brightness, slide to the right to exit and save the
record.
CAMERA
After connecting with the mobile phone, the smart bracelet can be used as a
remote controller for the mobile phone camera. Open “Photo control” in APP and
click on the icon to take a photo.
TIMER
Open this function to perform single and multiple timing times
FLASHLIGHT
After opening, the screen will be adjusted to the maximum brightness and
always on, and you can exit the interface after swiping left.
MORE
Click the “More” icon to enter the function interface. Rotate Slide Button to
change the dial plates.
POWER OFF
Slide "POWER OFF" to turn off the smart bracelet.
RESET
Click on "Confirm" to clear all data in the smart bracelet, and to restore factory
settings.
With an Android mobile phone, the device can be disconnected from your mobile
phone by simply clicking on 'Remove Device'.
For Apple mobile phones, after disconnecting, click on the icon to the right under
Settings - Bluetooth and select the device to ignore as shown below.
REMOVE DEVICE
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
