LEGRAND 0 626 00 Manual de usuario

LE05156AE

Interface + conﬁguration software

0 626 00

Important:

According to the European directive 91/157/EEC dated 18 March 1991, the batteries in this interface, which contain cadmium, may be dangerous for

the environment.

Technical characteristics:

• Power supply : 230V~50Hz

• Power consumption : 5 W 45 mA

• Battery : 9 V/110 mAh NiCd/NiMH

• Fuse protection : BUS 0.5 A F 250 V~(5 x 20)

• Connection : Mains, 2 terminals 1 x 1.5 mm²

• Cable sizes : - Remote controls, 2 terminals 1 x 1.5 mm²

- RS 232, 5 terminals 1 x 1.5 mm²

- RS 485, 2 terminals 1 x 1.5 mm²

- Fault relays, 6 terminals 1 x 1.5 mm²

- RJ 45 for connection to IP network

- Mini USB for direct connection to PC (max 1.5 m)

• Case insulation : Class II

• Operating temperature : + 5 °C to + 40 °C

• Storage temperature : - 10 °C to + 60 °C

• Dimensions : W 178.2 mm x H 87.1 mm

10 modules

To use this interface, you must ﬁrst conﬁgure it with the conﬁguration programme delivered on the USB-stick and using guide LE05022XX.

1Fault relay 1 connection terminals

2Fault relay 2 connection terminals

3Fault relay indicator

4USB socket

5Mains supply terminals

6Connection terminals for RS485 (2 conductors)

Connection terminals for RS232 (5 conductors)

Battery charge indicator

9Connection terminals for exterior control box catalogue no.: 0 039 00

BUS connection terminals

BUS presence indicator

Emergency lighting unit on/off buttons

Unit MAC address

RJ 45 connector for IP network

IP network presence indicator

Unit address selector

BUS protection fuse

Reset button

Description

Network

Reset

626 00

1 2

BUS

RS 485

1 23

 

  

    



System presentation

Rules of connecting

The interface Cat. No. 0 626 00 can monitor up to 1023 addressable emergency lighting units with 4 repeaters Cat. No. 0 626 03.

The maximum length of a line is 700 metres, above this you should add a repeater, Cat. No. 0 626 03.

The interface and each of its repeaters may be connected to a maximum of 250 addressable emergency lighting units.

Cable to be used for power supply and BUS connections for addressable emergency lighting units: U 1000 R2V 5G 1.5 mm2.

The total maximum length of a line is 2000 m (for star conﬁgurations). Beyond this distance add a repeater Cat. No. 0 626 03.

Star wiring example

Network

Reset

626 00

1 2

BUS

RS 485

Interface

Cat. No. 0 626 00

Max. length of a line of units: 700 m.

Above this, place a repeater in series with the following units

(max. BUS length 2000 m).

1023 units max.

250 units max.,

directly connected

to an interface.

Above this, use a repeater

Interface

MCB

Repeater

MCB

Repeater

Cat. No.

0 626 03

Example of series wiring, maximum 4 repeaters in series

10 A

MCB

230 V~ mains

Interface

Cat. No.

0 626 00

Repeater

Cat. No. 0 626 03

OUTBUS IN OUTIN

Max. length of a line of units: 700 m.

Above this, place a repeater in series with the following units

Max. length of a line of units: 700 m.

Above this, place a repeater in series with the following units

Repeater

Cat. No. 0 626 03

Safety instructions

This product should be installed in compliance with installation rules, preferably by a qualiﬁed electrician. Incorrect installation and/or incorrect use can lead to risk of electric

shock or ﬁre. Before carrying out the installation, read the instructions and take account of the product’s speciﬁc mounting location.

Do not open up, dismantle, alter or modify the device except where speciﬁcally required to do so by the instructions. All Legrand products must be opened and repaired

exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.

Use only Legrand brand accessories.

Otros manuales de Equipo de grabación de LEGRAND