LEGRAND Server Technology PRO1 Manual de usuario

Sentry Switched DC PDU

2 of 211

Sentry Switched DC PDU

3 of 211

About Your User Guide

This PRO1 Sentry Switched DC PDU user guide was designed for data center staff and administrators who

monitor power, control outlet actions, and direct equipment operations in the data center network using

Server Technology’s DC PDU product group.

Your user guide is a detailed resource for the PDU and its firmware user interfaces, providing:

•Interface pages, descriptions, usage, step-by-step instructions, and screen examples to assist you

with using the firmware’s Web Interface (GUI).

•Interface commands, description, syntax, usage, parameters, variables, as well as providing

command examples and results to assist you with using the firmware’s Command Line Interface

(CLI).

More Resources

Visit www.servertech.com for a wide variety of information about the PRO1 Sentry Switched DC PDU

product you have. Product support information from our power strategy experts, brochures, detailed

specifications, and many more resources –such as the innovate Build Your Own PDU and Product Selector

–are available on the Server Technology website to assist you with product knowledge, best product usage,

and an easy ordering process.

•2

Sentry Switched DC PDU

4 of 211

Contact Technical Support

Experience Server Technology's FREE Technical Support

Server Technology understands that there are often questions when installing and/or using a new product.

Free Technical Support is provided from 8 a.m. to 5 p.m. Pacific Time, Monday through Friday.

Server Technology, Inc. (a brand of Legrand)

1040 Sandhill Road Tel: 1-800-835-1515 Web: www.servertech.com

Reno, Nevada 89521 USA Fax: 775-284-2065 Email: [email protected]

Sentry Switched DC PDU

5 of 211

Chapter 1: Introducing the PRO1 Sentry Switched DC PDU

Server Technology’s PRO1 Sentry Switched DC PDU provides

industry-standard control of cabinet equipment at remote

locations, including colocation facilities and network

operations centers.

The PRO1 Sentry Switched DC PDU gives the ability to reboot

locked-up remote servers around the clock. Features include

individual outlet current outputs, measurements, and

automated alerts for a number of low and high current needs

for the specific environmental conditions.

Fused or Breaker Power Output Protection is a feature of the

PDU, meaning each low and high current output is individually protected by its own over-current protection

device, available in a variety of current capacities. Low current GMT fuses have a visual indicator that show

when the fuses are blown.

Because the fuses are rated as disconnect switches, they can be hot-swapped without removing power to

input-feeds. In addition, optional temperature and humidity probes with 10-ft. cords allow for multiple

sensors in different locations for complete environmental monitoring

DC Products vs. AC Products

The following items list how Server Technology’s DC PDUs differ from the AC PDUs:

•DC firmware is specific to the -48V DC product line.

•All units are Switched and have a minimum of two inputs.

•Input and output connections are terminal type, not common inlets/outlets.

•Each output terminal is individually protected by a fuse or circuit breaker rated for hot disconnect.

•Relays are normally-closed instead of normally open; there is no power-up sequencing.

•True input and output “On-Sense”.

•Measures only current (amps) at each output (no input/aggregate measurements, no voltage

measurement).

•Direct current (DC) is simpler than alternating current (AC); only need to know Watt’s Law:

Watts = Volts x Amps

Volts = Watts / Amps

Amps = Watts / Volts

Sentry Switched DC PDU

6 of 211

Advantages of the PRO1 Sentry Switched DC PDU

The PRO1-based DC product line is based on Server Technology’s PRO1 PDU platform and firmware, which

offers:

•Faster processor and more memory

•Hot swap network card

•Network card swap with no re-programming (PCM)

•Features/functions can be added as needed

•Multi-linking (up to 4 linked units, 1 master unit and 3 link units)

•Power from link unit keeps network up if power from master unit goes down

•Sentry4-MIB allows additional alarm warning and threshold levels

Sentry Switched DC PDU

7 of 211

Key Features

Several notable features of Server Technology’s PRO1 Sentry Switched DC PDUs include:

Output Control

Cycle power to individual outputs or groups of outputs to reboot servers or to

power off unused terminals.

Output Current

Monitoring

Network monitoring provides access to current draw at each output and alerts

when high usage risks a tripped circuit.

Disconnect Rated

Circuit Protection

Each output is protected by a fuse or circuit breaker and is rated for hot

disconnect.

Temperature/Humidity

Monitoring

Master and Link units (select products) each support two external 10-ft (3m) T/H

probes. Receive SNMP-based alerts and email notifications.

Network Monitoring

Gain access to valuable data through connections, including HTTP(S), SSH, Telnet,

SNMP, (S)FTP, SMPT, Syslog, LDAP(S), RS-232 serial, and more.

Linkable Expansion

Connect an expansion rack PDU to a master rack PDU for power monitoring of

separate power circuits from a single IP address.

Sentry Switched DC PDU

8 of 211

Additional Features of DC Products:

•TCP/IP Control to configure/manage and remotely Power On, Power Off, or Reboot attached devices

via:

•Web GUI and CLI access via network

•Out-of-Band access to CLI via serial/console port

•Current (amps) is measured at each individual output

•Multiple User Simultaneous Access

•Firmware flash-upgrade available by various methods

•Logging via internal log, Email/SMTP, and Syslog

•LDAP[S]/Active Directory, RADIUS, and TACACS+ Authentication and Authorization support

•Each model supports two (2) combination temperature & relative humidity environmental sensors

Part numbers EMTH-2-10 (10 ft) and EMTH-2-20 (20 ft)

•Supports optional Environmental Monitor Control Unit (EMCU-1-1C)

•Supports StartUp Stick for configuration of initial network settings

•Unique Expansion Capability:

One master PRO1 Sentry Switched DC PDU can be linked to up to three DC link units

oAccommodates redundant setup with no single-point of failure

oMore than one link unit requires multi-link dongle (Part number KIT-PRO2LINK-01D)

oLogical grouping of any outputs in the system (master and link units)

•Nominal operating range for voltage is -40V to -60V

•IMPORTANT: Requires a negative (-) DC system

•Server Technology JSON API Web Service (JAWS)

•Server Technology INI Configuration (STC) file format

•SNMP v2c and v3; same Sentry4.mib and OID Tree as with PRO Series AC products

•Most models rated for 0°C to 50°C operation

•Network Equipment-Building System (NEBS) Certification (certain models)

NEBS Certified

Sentry Switched DC PDU

9 of 211

Chapter 2: The PRO1 Sentry Switched DC PDU Models

This chapter shows unit drawings, hardware specifications, terminal stud spacing diagrams, and fuse/circuit

breaker information.

48DCWC-16-2X100-A0

Terminal Stud Spacing

The 48DCWC-16-2X100-A0 terminal stud spacing:

Sentry Switched DC PDU

10 of 211

Mounting Bracket

The 48DCWC-16-2X100-A0 mounting bracket:

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de LEGRAND

LEGRAND

LEGRAND DA2401 Manual de usuario

LEGRAND

LEGRAND Wattstopper 225CWS Manual de usuario

LEGRAND

LEGRAND Qmotion Range Extender Manual de instalación

LEGRAND

LEGRAND 0 677 66 Manual de usuario

LEGRAND

LEGRAND On-Q F7804 Instrucciones de montaje

LEGRAND

LEGRAND 4 306 24 Manual de usuario

LEGRAND

LEGRAND 0 490 87 Manual de usuario

LEGRAND

LEGRAND HA7040 Manual de usuario

LEGRAND

LEGRAND LCS 0 321 Series Manual de usuario

LEGRAND

LEGRAND 369420 Manual de usuario

LEGRAND

LEGRAND Wattstopper WBT900-IP Manual de usuario

LEGRAND

LEGRAND LMBC-600 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario