LEGRAND 0 648 88 Manual de usuario
LE10319AA
Connected lighting micromodule
0 648 88
This pack is a connected accessory which requires you to buy and install the «... with
Netatmo». connected starter pack first.
Pack contents
Connected
lighting micromodule
Characteristics
**
R L
LED
100-240VAC
50/60Hz
1x1.5mm
240VAC Max. 300W *100W 250 VA 250VA 250VA
100VAC Max. 150W *50W 125 VA 125VA 125VA
+45°C
+5°C
In default mode (on/off), this switch works with the following types of bulb:
(*)
Or 10 bulbs max. For comfortable lighting, we recommend using bulbs of the same
type and make.
(**)Use only transformers intended for operation with electronic switches. Take account or
transformer losses for power calculations. Transformers should be charged to over 60%
of their rated power.
2
To install or replace a remote switch, only use the product:
Do not use: a connected switch (with dimmer option) to control a connected
lighting micromodule.
x 1
Connected lighting micromodule
To control your micromodule:
At least one wireless lighting switch from the «...with Netatmo”connected ranges
must be paired with it.
To create your wireless lighting two-way switch:
Add one or several wireless lighting switches from the «...with Netatmo”connected
ranges.
Safety instructions
This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can
lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be
opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities
and the rights to replacement and guarantees. Use only Legrand brand accessories.
You can keep the existing push buttons or replace them with
wireless controls.
Before you start: wiring precautions
LE10319AA
Connected lighting micromodule
0 648 88
This pack is a connected accessory which requires you to buy and install the «... with
Netatmo». connected starter pack first.
Pack contents
Connected
lighting micromodule
Characteristics
**
R L
LED
100-240VAC
50/60Hz
1x1.5mm
240VAC Max. 300W *100W 250 VA 250VA 250VA
100VAC Max. 150W *50W 125 VA 125VA 125VA
+45°C
+5°C
In default mode (on/off), this switch works with the following types of bulb:
(*)
Or 10 bulbs max. For comfortable lighting, we recommend using bulbs of the same
type and make.
(**)Use only transformers intended for operation with electronic switches. Take account or
transformer losses for power calculations. Transformers should be charged to over 60%
of their rated power.
2
To install or replace a remote switch, only use the product:
Do not use: a connected switch (with dimmer option) to control a connected
lighting micromodule.
x 1
Connected lighting micromodule
To control your micromodule:
At least one wireless lighting switch from the «...with Netatmo”connected ranges
must be paired with it.
To create your wireless lighting two-way switch:
Add one or several wireless lighting switches from the «...with Netatmo”connected
ranges.
Safety instructions
This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can
lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be
opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities
and the rights to replacement and guarantees. Use only Legrand brand accessories.
You can keep the existing push buttons or replace them with
wireless controls.
Before you start: wiring precautions
3
Install the connected lighting micromodule
The «... with Netatmo» connected lighting micromodule can be easily installed in a ceiling
light or in wall lights.
Wire the connected lighting micromodule
Option: remote control
wiring using a non-
illuminated mechanical
pushbutton.
x 5 Max.
Frequency bands: 2.4 - 2.4835 GHz
Power level: <100mW
Max. 15m
Make sure that the power is off before
continuing with the installation.
OFF
Switch off the power
at the main circuit
breaker
Make sure that the
power is off before
continuing with the
installation.
N (neutral) = blue
L (live) = any except blue and green/yellow
(earth) = green/yellow
To add a connected product to your connected installation,
you should follow the instructions:
- in the user guide in your connected starter pack
- in the Legrand Home + Control application (Settings/Add a new product section)
- or consult the user manual on legrand.fr
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these
instructions complies with directive 2014/53/EU.
The full text of the EU declaration of conformity is available
on the following website:
www.legrandoc.com
LEGRAND - Pro and Consumer Service - BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
www.legrand.fr
3
Install the connected lighting micromodule
The «... with Netatmo» connected lighting micromodule can be easily installed in a ceiling
light or in wall lights.
Wire the connected lighting micromodule
Option: remote control
wiring using a non-
illuminated mechanical
pushbutton.
x 5 Max.
Frequency bands: 2.4 - 2.4835 GHz
Power level: <100mW
Max. 15m
Make sure that the power is off before
continuing with the installation.
OFF
Switch off the power
at the main circuit
breaker
Make sure that the
power is off before
continuing with the
installation.
N (neutral) = blue
L (live) = any except blue and green/yellow
(earth) = green/yellow
To add a connected product to your connected installation,
you should follow the instructions:
- in the user guide in your connected starter pack
- in the Legrand Home + Control application (Settings/Add a new product section)
- or consult the user manual on legrand.fr
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these
instructions complies with directive 2014/53/EU.
The full text of the EU declaration of conformity is available
on the following website:
www.legrandoc.com
LEGRAND - Pro and Consumer Service - BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
www.legrand.fr
Otros manuales para 0 648 88
2
Tabla de contenidos
Otros manuales de Equipo de iluminación de LEGRAND
LEGRAND
LEGRAND 0 648 88 Manual de usuario
LEGRAND
LEGRAND LED SATELLITE Manual de usuario
LEGRAND
LEGRAND 628 25 Manual de usuario
LEGRAND
LEGRAND Kenall CAE Series Manual de usuario
LEGRAND
LEGRAND URA ONE Series Manual de usuario
LEGRAND
LEGRAND Wattstopper LMRC-102 Manual de usuario
LEGRAND
LEGRAND KENALL MILLENIUM METREX METSW Series Manual de usuario
LEGRAND
LEGRAND G5 VISION 61774 Manual de usuario
LEGRAND
LEGRAND WP2 LED Manual de usuario
LEGRAND
LEGRAND adorne ADWR700MMTU Manual de usuario
LEGRAND
LEGRAND 0 405 10 Manual de usuario
LEGRAND
LEGRAND Finelite HP-4 Manual de usuario
LEGRAND
LEGRAND 025626 Manual de usuario
LEGRAND
LEGRAND BH4NDWE Manual de usuario
LEGRAND
LEGRAND 0 580 10 Manual de usuario
LEGRAND
LEGRAND 6 624 52 Manual de usuario
LEGRAND
LEGRAND Bulkhead 265 LED Manual de usuario
LEGRAND
LEGRAND CP Electronics Vitesse Modular Manual de usuario
LEGRAND
LEGRAND Kenall SENSCAPE SPG18 Manual de usuario
LEGRAND
LEGRAND CONNECTRAC Manual de usuario
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
