Legend QDI RV2000 AGP Manual de usuario
QDI RV2000
AGP
3D Graphic Card
QDI RV2000 AGP
User’s Guide
Version 1.2
Copyright1998 LEGEND.QDI
All rights reserved
No part of this manual may be reproduced or transferred to other
media without permission from QDI.
Notice
QDIbelieves the information contained in this document is accurate and reliable.
However, QDIreserves the right to make corrections, improvements, or changes
to this document at any given time without prior notice.
Please refer to README file in the driver diskette for operating instructions and
other information updates.
Trademarks Acknowledgments
•MS-DOS, Windows, and DirectX are trademarks of Microsoft Corporation
•Pentium is a trademark of Intel Corporation
•OS/2, VGA are trademarks of IBM Corporation
All other brands and product names are trademarks of their respective companies.
Contents
Introduction
1
Features................................................................................................1
System Requirements ..........................................................................2
Package Contents.................................................................................2
Software Upgrade ................................................................................2
Hardware Installation 3
Drivers Auto-Installation 5
Before you begin..................................................................................5
Operating System Requirements .........................................................5
Installation of RV2000 display drivers
for Windows 95/98/NT .......................................................................5
Configuring Windows 95 Driver.........................................................9
Configuring Windows NT 4.0 Driver...............................................12
Video-In drivers Installation 13
Running Video-In Software...............................................................16
BIOS Upgrade
User’s Manual 1
Introduction
Thank you for purchasing the QDI RV2000 AGP 3D Graphic
Card.
With Rendition V2200 True Media Accelerator built in, your QDIRV2000 combines outstanding 3D acceleration, excellent 2Dgraphics and superior video quality on a single board, providingyou with both high performance and satisfied quality in 3D gameand multimedia applications.
Features:
•AGP Bus, AGP V1.0 interface compliant.
•Rendition V2200 3D Accelerator embedded high
performance RISC processor.
•4MB 100MHz SGRAM on board, 800MB bandwidth.
•Excellent 2D graphics acceleration for business applications .
•Powerful hardware triangle engine, pixel engine and fill
engine, delivering advanced 3D features and 3D special
effects.
•High quality video playback MPEG-2 acceleration in
hardware.
High quality video-in (NTSC/PAL) supports video
conference application and full motion video recording
(optional).
Flicker free TV out (NTSC/PAL) with overscan
compensation for displaying games on large TV screens.
•230 MHz RAMDAC for high resolution, high color depth
and high refresh rate, displays up to 1600x1200 with 85 Hz.
•VGA fully compatible.
DPMS for power management support.
DDC2B for monitoring plug and play support.
Introduction
2
•Driver Auto-Installation for Window 95/98/NT.
•Drivers for major operation systems and APIs Windows 95,
Windows 98, Windows NT4.0, DirectX5, OpenGL support,
etc.
Supports popular games with 3D acceleration and 3D special
effect.
System Requirements:
Computer :Uses mainboard with an AGP Bus slot.
Monitor :Standard VGA monitor. For receiving all the
benefits from the graphic card, a high
resolution multi-frequency monitor is needed.
Operating :Windows 95; Windows 98, Windows NT
System 4.0 etc.
Package Contents:
Before installing your QDI RV2000 graphic card, please check to
make sure your QDI RV2000 package is complete.
QDI RV2000 AGP graphic card.
Driver CD-ROM Disk.
User's manual.
Contact your dealer if you find anything missing or damaged.
Note! Graphic cards are sensitive to static charge. To avoid
damage that may occur by static charge, leave the graphic card
in its antistatic packaging until installation. Keep the packaging
for possible future transportation.
Software Upgrade
You can visit our web-site: http: // www.qdigrp.com /for BIOS,
drivers updates and other release information .
User’s Manual 3
Hardware Installation
Follow the detailed procedures described in this section for easy
installation of the QDI RV2000 Graphic card onto your computer
system. The only tool needed for installation is a screwdriver.
Note! Before installing the QDI RV2000 AGP card, touch a
metal surface of your computer to discharge yourself of static
charge, hold the graphic card by the edges be sure not to touch
the IC chips, leads or circuits.
1. Before opening the computer cover , be sure that the
power to the computer system unit and all devices
connected to it are turned off. Disconnect the computer
from the power supply.
2. In a typical PC computer all cover mounting screws are
located on the back of the computer. Remove these screws
and save them. Carefully remove the cover.
3. Remove an existing VGA card or disable the mainboard’s
VGA.
Hardware Installation 4
4. Remove the AGP slot shield at the back of the computer by
removing its retaining screw and lifting it out. Save the screw.
5. Carefully insert the graphic card into the AGP slot by
holding the card at the top and gently pushing both ends
into the slot at the same time. Do not force the card into
the slot! If the card does not fit easily, pull it back, and try
again.
1. Secure the card with the screw removed in the above step.
2. Replace and secure the system cover.
3. Connect a VGA compatible or multi-frequency monitor
with the 15 pin video connector at the back of the
QDI RV2000 card.
4. Connect the computer to the power supply.
User’s Manual 5
Drivers Auto-Installation
Before you begin
All the installation instructions assumes that the
CD-ROM disk is located in drive D: and that Windows
95 is in C:\Windows. Replace either with the actual
location if necessary.
Operating System Requirements
For all AGP features benefits, use Windows 95 OSR2.1
or the later version. To install Windows 95 OSR2.1, first
install OSR2.0 then upgrade to OSR2.1 by installing
USBSUPP which is provided by Microsoft. You can
contact the distributor of Windows 95 OSR2 for
USBSUPP supplement.
Installation of RV2000 display drivers for
Windows 95/98/NT
The display drivers can be automatically installed into
Windows 95, Windows 98 and Windows NT4.0.
1. Installing Standard VGA Driver
It is recommended that you first install Windows
95/98/NT with the RV2000 AGP card already installed.
Drivers Auto-Installation
6
After the installation of Windows 95/98/NT, the default
VGA driver should have been installed first.
If Windows 95(OSR2) has been installed before the
installation of the RV2000 AGP card, the first time
Windows 95 runs with the RV2000, the Update Device
Driver Wizard window appears, click next (Do not click
Cancel , or your system will hang!). Then click finish to
install the standard VGA driver, direct the installation
path to your \windows\system directory if Windows 95
CD is requested. Follow the prompt, do not restart
Windows 95 then proceed to step 2. If using Windows
98/NT, this incident will not occur.
2. Installing the RV2000 driver
After inserting the auto-run RV2000 driver CD into the
CD ROM drive, a dialog box pops up as shown below.
Tabla de contenidos
Otros manuales de Tarjeta de video de Legend
Manuales populares de Tarjeta de video de otras marcas
Gainward
Gainward GeForce GTX 690 4GB Manual de usuario
ATI Technologies
ATI Technologies RADEON 137-40225-20 Manual de usuario
MSI
MSI N220GT series Manual de usuario
ATI Technologies
ATI Technologies RADEON 7000 MAC EDITION Manual de usuario
SIIG
SIIG aurora Manual de usuario
ClearSpeed
ClearSpeed ClearSpeed Advance e720 Manual de usuario
