LED Lighting FRT5 V2 Manual de usuario

FRT5 V2

INSTALLATION MANUAL

Class III

Installaon Requirements

• This xture must be supplied with SELV voltage that does not exceed 50VAC and is normally 24V. Follow the

PSU parameters for input power from the socket.

• Connect to an individual branch circuit.

• LLSA ensures a 2 kV surge protecon on our PSU, anything out of this range will void warranty provided.

• Improper installaon might cause an electric shock accident.

• Use an authorized electrical professionals to do the installaon, repair and maintenance of the light xture.

• Cut o the power before and during installaon, maintenance and repair of the light xture.

• Do not install the light xture on top of or near hot objects to avoid damage. (For example hot gas pipes, exhaust

funnels or stoves)

• Do not install the light xture in a damp area or where liquid leakage is potenal.

• Make sure no re regulaons are violated.

• Do not cover the lamp with a heat insulang material.

• Do not look directly at the light xture for a long period of me to avoid sight damage.

• The use of third party replacement parts is not recommended by the manufacturer for it will lead to warranty void.

• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a

similar qualied person.

Cleaning and Maintenance of Enclosure

• Do not use solvent-based cleaning agents, this will cause cracks to form in the plasc diuser covers.

• Clean with a damp cloth and silicone-based cleaning agent. (Such as Mr Min)

• The protecon against electric shock is based on the use of a safety extra low voltage power supply (SELV).

• No provision for earthing is provided.

Product Informaon

Bracket Opons

DIMENSIONS: **** dependant on bracket type PRODUCT WEIGHT: 0.9kg/m PACKAGED WEIGHT: 1.2kg/m

Stainless Steel Galvanized Steel

Installaon Tools

Electric drill and mounting material

appropriate drill bit

Screw type appropriate

screwdriver

Instrucons (steps to follow)

- Magnec mounng

Mounng Methods

Instrucons (steps to follow)

- Bracket mounng

Ensure neat and proper

cable management at all

times.

Failure to do so might

result in cable failure and /

or damage.

Connector types and use

- No-strip connector

Connecon to power

Connector types and use

- TE connector

Always ensure the power

has been disconnected

before installation and

connecting the fittings.

Wiring diagram

- Always check power supply / transformer parameters before connecon

Tabla de contenidos

Otros manuales de Equipo de iluminación de LED Lighting

LED Lighting

LED Lighting C-LITE C-BD-A-BLD Series Manual de usuario

LED Lighting

LED Lighting Moving Head MH-250 Manual de usuario

LED Lighting

LED Lighting STAGE PRO SPOT 2000 PC Manual de usuario

LED Lighting

LED Lighting H11/9005/9006 Manual de usuario

LED Lighting

LED Lighting Smart Music Bulb Manual de usuario

LED Lighting

LED Lighting SPOT 300 FRE Manual de usuario

LED Lighting

LED Lighting STAGE PROSPOT 650 FRESNEL Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario