910
1. Press and fix J (left foot pedal) on the corresponding position as shown
in figure.
2. Press and fix I (right foot pedal) on the corresponding position as shown
in figure.
3. Use K (Foot pedal hold-open catch) to fix two foot pedal.
J
I
K
1. Use screwdriver to remove Q2(self-tapping screw).
2. Take P (music box battery cover) down from F (music box).
1. Place C (handlebar components) on the corresponding position on the
car body as shown in figure.
2. Press N (Steering rod fixed axis) into the hole as shown in figure, use
spanner in a clockwise direction to fix it.
3. Properly connect X and Y (terminals for power supply ).
X
N
NC
YY
Install foot pedal:
Install handlebar components:
Install music board Ⅰ:
1. Use Spanner in a
anticlockwise direction to
unsnatch two Q (M8 nuts)
from the rear axle.
2. Use spanner in a
anticlockwise direction to
unsnatch two R (M6 nuts)
from the jockey pulley
fixed axis.
1. Install L (right and left
jockey pulleys) on the
corresponding position as
shown in figure.
2. Use spanner in a clockwise
direction to fix two R (M6
nuts) on the jockey pulley
fixed axis .
3. Use spanner in a clockwisw
direction to fix two Q (M8
nuts) on the rear axle.
L
L
QQ
RR
Install jockey pulley Ⅰ:
Install jockey pulley Ⅱ:
QR
Q Q
R R
QR
Q2 P
F
Q2
