Leading Edge HX8410 Manual de usuario
USER MANUAL
HX8410 CNC Milling Machine
User manual
First Edition
Copyright © 2016 by Leading Edge Industrial Technologies, LLC
Lafayette, I
all rights reserved
Table o Contents
LIMITED WARRANTY CERTIFICATE..........................................................................4
Customer Satisfaction Procedure.......................................................................................
Safety..................................................................................................................................8
WCS/Machine Coordinate System and UCS CARTESIAN COORDINATES ................9
Installing Software............................................................................................................10
Supported G and M Codes................................................................................................11
Setting up and running your first part ..............................................................................18
Appendix A: X-axis Assembly.........................................................................................19
Appendix A: Y-axis Assembly..........................................................................................20
Appendix A: Z-axis Assembly..........................................................................................21
Appendix A: Sheet Metal Assembly.................................................................................22
Appendix B: Maintenance................................................................................................23
Leading Edge Industrial Technologies, LLC
LIMITED WARRANTY CERTIFICATE
Covering Leading Edge Industrial Technologies, LLC C C Equipment
Effective March 1, 2016
Leading Edge Industrial Technologies, LLC (“LEI Tech” or “Manufacturer”) provides a limited warranty
to all new mills and turning centers (collectively, “C C Machines”) and its components (except those
listed below under Limits and Exclusions of Warranty) (“Components”) that are manufactured by LEI
Tech and sold by LEI Tech or its authorized distributors as set forth in this Certificate. The warranty set
forth in this Certificate is a limited warranty and it is the only warranty by Manufacturer and is subject to
the terms and conditions of this Certificate.
Limited Warranty Coverage
Each C C Machine and its Components (collectively, “LEI Tech Products”) are warranted by
Manufacturer against defects in material and workmanship. This warranty is provided only to the final
purchaser and end-user of the C C Machine (a “Customer”). The period of this limited warranty is one
(1) year.
The warranty period commences on the date the C C Machine is delivered to the Customer’s facility.
Customer may purchase an extension of the warranty period from LEI Tech or an authorized LEI Tech
distributor (a “Warranty Extension”).
Repair or Replacement Only
Manufacturer’s sole liability, and customer’s exclusive remedy, with respect to any and all LEI Tech
products shall be limited to repairing or replacing, at the discretion of manufacturer, the defective LEI
Tech product under this warranty.
Disclaimer o Warranty
This warranty is manufacturer’s sole and exclusive warranty and is in lieu of all other warranties of
whatever kind or nature, express or implied, written or oral, including, but not limited to, any implied
warranty of merchantability, implied warranty of fitness for a particular purpose, or other warranty of
quality or performance or noninfringement. All such other warranties of whatever kind are
hereby disclaimed by manufacturer and waived by customer.
Limits and Exclusions o Warranty
Components subject to wear during normal use and over time, including, but not limited to, paint, window
finish and condition, light bulbs, seals, chip removal system, etc., are excluded from this warranty.
Manufacturer’s specified maintenance procedures must be adhered to and recorded in order to maintain
this warranty. This warranty is void if Manufacturer determines that (i) any LEI Tech Product was
subjected to mishandling, misuse, abuse, neglect, accident, improper installation, improper
maintenance, improper storage, or improper operation or application, (ii) any LEI Tech Product was
improperly repaired or serviced by Customer, an unauthorized service technician, or other unauthorized
person, (iii) Customer or any person makes or attempts to make any modification to any LEI Tech
Product without the prior written authorization of Manufacturer, and/or (iv) any LEI Tech Product was
used for any non-commercial use (such as personal or household use). This warranty does not cover
damage or defect due to an external influence or matters beyond the reasonable control of
Manufacturer, including, but not limited to, theft, vandalism, fire, weather condition (such as rain, flood,
wind, lightning, or earthquake), or acts of war or terrorism.
Without limiting the generality of any of the exclusions or limitations described in this Certificate, this
warranty does not include any warranty that any LEI Tech Product will meet any person’s production
specifications or other requirements or that operation of any LEI Tech Product will be uninterrupted or
error-free. Manufacturer assumes no responsibility with respect to the use of any LEI Tech Product by
any person, and Manufacturer shall not incur any liability to any person for any failure in design,
production, operation, performance or otherwise of any LEI Tech Product other than repair or
replacement of same as set forth in this warranty above.
Limitation o Liability and Damages
Manufacturer will not be liable to customer or any other person for any compensatory, incidental,
consequential, punitive, special, or other damage or claim, whether in an action in contract, tort, or other
legal or equitable theory, arising out of or related to any LEI Tech product, other products or services
provided by manufacturer or an authorized distributor, service technician or other authorized
representative of manufacturer (collectively, “authorized representative”), or the failure of parts or
products made by using any LEI Tech product, even if manufacturer or any authorized representative
has been advised of the possibility of such damages, which damage or claim includes, but is not limited
to, loss of profits, lost data, lost products, loss of revenue, loss of use, cost of down time, business good
will, any damage to equipment, premises or other property of any person, and any damage that may be
caused by a malfunction of any LEI Tech product. All such damages and claims are disclaimed by
manufacturer and waived by customer. Manufacturer’s sole liability, and customer’s exclusive remedy,
for damages and claims for any cause whatsoever shall be limited to repair or replacement, at the
discretion of manufacturer, of the defective LEI Tech product as provided in this warranty.
Customer has accepted the limitations and restrictions set forth in this Certificate, including, but not
limited to, the restriction on its right to recover damages, as part of its bargain with Manufacturer or its
Authorized Representative.
Customer realizes and acknowledges that the price of the LEI Tech Products would be higher if
Manufacturer were required to be responsible for damages and claims beyond the scope of this
warranty.
Entire Agreement
This Certificate supersedes any and all other agreements, promises, representations or warranties,
either oral or in writing, between the parties or by Manufacturer with respect to subject matter of this
Certificate, and contains all of the covenants and agreements between the parties or by Manufacturer
with respect to such subject matter. Manufacturer hereby expressly rejects any other agreements,
promises, representations or warranties, either oral or in writing, that are in addition to or inconsistent
with any term or condition of this Certificate. o term or condition set forth in this Certificate may be
modified or amended unless by a written agreement signed by both Manufacturer and Customer.
otwithstanding the foregoing, Manufacturer will honor a Warranty Extension only to the extent that it
extends the applicable warranty period.
Trans erability
This warranty is transferable from the original Customer to another party if the C C Machine is sold via
private sale before the end of the warranty period, provided that written notice thereof is provided to
Manufacturer and this warranty is not void at the time of transfer. The transferee of this warranty will be
subject to all terms and conditions of this Certificate.
This warranty shall be governed by the laws of the State of Indiana without application of rules on
conflicts of laws. Any and all disputes arising from this warranty shall be resolved in a court of competent
jurisdiction located in Tippecanoe County, Indiana. Any term or provision of this Certificate that is invalid
or unenforceable in any situation in any jurisdiction shall not affect the validity or enforceability of the
remaining terms and provisions hereof or the validity or enforceability of the offending term or provision
in any other situation or in any other jurisdiction.
Customer Satis action Procedure
Dear LEI Tech customer,
Your complete satisfaction and goodwill are of the utmost importance to both Leading Edge Industrial
Technologies and the Leading Edge Industrial Technologies distributor where you purchased your equipment.
ormally, any concerns you may have about the sales transaction or the operation of your equipment will be
rapidly resolved by your distributor.
However, if your concerns are not resolved to your complete satisfaction, and you have discussed
your concerns with a member of the dealership’s management, the General Manager
or the dealership’s owner directly, please do the following:
Contact Leading Edge Industrial Technologies Customer Service Center by calling 765-471-7007 and ask for the
Customer Service Department. So that we may resolve your concerns as quickly as possible, please have the
following information available when you call:
• Your name, company name, address and phone number
• The machine model and serial number
• The dealership name, and the name of your latest contact at the dealership
• The nature of your concern
If you wish to write Leading Edge Industrial Technologies, please use this address:
Leading Edge Industrial Technologies, LLC
3210 Olympia Dr.
Suite B
Lafayette, I 47909
Att: Customer Service
e-mail: [email protected]
Once you contact the Leading Edge Industrial Technologies Customer Service Center, we will make every effort
to work directly with you and your distributor to quickly resolve your concerns. At Leading Edge Industrial
Technologies we know that a good Customer-Distributor-Manufacturer relationship will help ensure continued
success for all concerned.
Customer Feedback
.
If you have any concerns or questions in regard to the Leading Edge Industrial Technologies Operator's manual,
please contact us via our e-mail, [email protected] . We look forward to any suggestions you
may have.
Sa ety
READ BEFORE OPERATING THIS MACHINE:
All milling machines contain haza ds f om otating cutting tools, belts and pulleys, high voltage
elect icity, noise, and comp essed ai . When using milling machines and thei components, basic
safety p ecautions should always be followed to educe the isk of pe sonal inju y and
mechanical damage. READ ALL APPROPRIATE WARNINGS, CAUTIONS, AND
INSTRUCTIONS BEFORE OPERATING THIS MACHINE.
♦ Only authorized personnel should work on this machine. Untrained personnel present a hazard to
themselves and the machine, and improper operation will void the warranty.
♦ Check for damaged parts and tools before operating the machine. Any part or tool that is damaged
should be properly repaired or replaced. Do not operate the machine if any component does not appear
to be functioning correctly. Contact your shop supervisor.
♦ Use appropriate eye and ear protection while operating the machine. ANSI approved impact safety
goggles and OSHA-approved ear protection are recommended to reduce the risks of sight damage and
hearing loss.
♦ Do not operate the machine unless the doors are closed and the door interlocks are functioning
properly. Rotating cutting tools can cause severe injury. When a program is running, the mill table and
spindle head can move rapidly at any time in any direction.
♦ The Emergency Stop button is the large, circular red switch located on the Control Panel. Pressing the
Emergency Stop button will instantly stop all motion of the machine, the servo motors, the tool
changer, and the coolant pump. Use the Emergency Stop button only in emergencies to avoid crashing
the machine.
♦ The electrical panel should be closed and secured at all times except during installation and service.
At those times, only qualified electricians should have access to the panel. When the main circuit
breaker is on, there is high voltage throughout the electrical panel (including the circuit boards and
logic circuits) and some components operate at high temperatures. Therefore, extreme caution is
required. Once the machine is installed, the control cabinet must be locked and the key available only
to qualified service personnel.
♦ DO NOT modify or alter this equipment in any way. If modifications are necessary, all such requests
must be handled by LEI Tech. Any modification or alteration of any Milling Machine or Turning
Center could lead to personal injury and/or mechanical damage and will void your warranty.
♦ Consult your local safety codes and regulations before operating the machine. Contact your dealer
anytime safety issues need to be addressed.
♦ It is the shop owner’s responsibility to make sure that everyone who is involved in installing and
operating the machine is thoroughly acquainted with the installation, operation, and safety instructions
provided with the machine BEFORE they perform any actual work. The ultimate responsibility for
safety rests with the shop owner and the individuals who work with the machine.
♦ This machine is automatically controlled and may start at any time.
♦ This machine can cause severe bodily injury.
♦ Do not operate with the doors open.
♦ Avoid entering the machine enclosure.
♦ Do not operate without proper training.
♦ Always wear safety goggles.
♦ The electrical power must meet the specifications in this manual. Attempting to run the machine from
any other source can cause severe damage and will void the warranty.
♦ Do not attempt to operate the machine before all of the installation instructions have been completed.
♦ Never service the machine with the power connected.
♦ Improperly clamped parts machined at high speeds/feeds may be ejected and puncture the safety
door. Machining oversized or marginally clamped parts is not safe.
♦ Windows must be replaced if damaged or severely scratched - Replace damaged windows
immediately.
♦ Do not process toxic or flammable material. Deadly fumes can be present. Consult material
manufacturer for safe handling of material by-products before processing.
♦ The spindle head can drop without notice. Personnel must avoid the area directly under the spindle
head.
♦ Follow these guidelines while pe fo ming jobs on the machine:
Normal operation - Keep the door closed while machine is operating.
Part loading and unloading – An operator opens the door or guard, completes task, closes door or guard
before pressing cycle start (starting automatic motion).
Tool loading or unloading – A machinist enters the machining area to load or unload tools. Exit the area
completely before automatic movement is commanded (for example, next tool, ATC/Turret
FWD/REV).
Maintenance / Machine Cleaner– Press emergency stop or power off the machine before entering
enclosure.
Do not ente the machining a ea anytime the machine is in motion; seve e inju y o death may
esult.
Unattended Ope ation
Fully enclosed LEI Tech CNC machines are designed to operate unattended; however, your machining
process may not be safe to operate unmonitored.
As it is the shop owner’s responsibility to set up the machines safely and use best practice machining
techniques, it is also their responsibility to manage the progress of these methods. The machining
process must be monitored to prevent damage if a hazardous condition occurs.
For example, if there is the risk of fire due to the material machined, then an appropriate fire
suppression system must be installed to reduce the risk of harm to personnel, equipment and the
building. A suitable specialist must be contacted to install monitoring tools before machines are
allowed to run unattended.
It is especially important to select monitoring equipment that can immediately perform an appropriate
action without human intervention to prevent an accident, should a problem be detected
Tabla de contenidos
