Kilometre/Mile
Light sensitive Light sensitive
Backlight brightness Backlight brightness
Buzzer on/off Buzzer on/off
Auto off time Time until automatic switch-off
Power display Power display
Maintain remind Maintenance reminder
Wheel diameter Wheel diameter
Voltage set Voltage setting
Password Password
Speed limit set Speed limit set
Kilometres/miles: Select the S7 symbol on the speed display, press the UP/DOWN button to switch between km/h and
MPH symbols (kilometres and miles).
°C/°F: Set the CF symbol on the speed display, press the UP/DOWN button to switch between °C/°F symbols.
Light sensitive: Select the bL0 symbol on the speed display, press the UP/DOWN button to set the 0~5 symbol. 0
means that the automatic lights and backlight are switched off. 1~5 means that the automatic lights and backlight are
SWITCHED ON. 1means the highest sensitivity (automatic activation of backlight at high level of ambient light), 5
means the lowest sensitivity (automatic activation of backlight at low level of ambient light).
Backlight brightness Select the bL1 symbol on the speed display, press the UP/DOWN button to set the 1~5 symbol
for the respective backlight brightness.
Button sound on/off Select the bEP symbol on the speed display, press the UP/DOWN button to switch between 0/1
symbols. 0 means that the sounds are off. 1means that the button sounds are on.
Auto off time: Select the OFF symbol on the speed display, press the UP/DOWN button to set the 1~9 symbol, which
represents the time remaining until the automatic switch-off, the default value is 5 minutes.
Power display: Select the Pod symbol on the speed display, press the UP/DOWN button to switch between the 0/1
symbols, which represent whether you want power to be displayed on the LCD.
Maintenance reminder: Select the nnA(ma) symbol on the speed display, press the UP/DOWN button to switch be-
tween 0/1 symbols. 0means that the maintenance reminder is off and 1means that the maintenance reminder is on.
Wheel diameter: Set the Wd symbol on the speed display, press UP or DOWN
*
* This function is preset in accordance with the applicable EU standards.
