Leader Electronics Corp. LV 5330 Manual de usuario

LEADER ELECTRONICS CORP.

LV 5330

MULTI SDI MONITOR

Instruction Manual

Contents

GENERAL SAFETY SUMMARY ......................................................................................... I

1. Introduction.............................................................................................................. 1-1

1.1 Scope of Warranty ...............................................................................................................1-1

1.2 Handling Precautions...........................................................................................................1-1

1.2.1 Power Supply Voltage...................................................................................................1-1

1.2.2 Maximum Allowable Input Voltage ................................................................................1-2

1.2.3 Shorting and Applying External Input to the Output Connectors...................................1-2

1.2.4 Mechanical Shock.........................................................................................................1-2

1.2.5 Electrostatic Damage....................................................................................................1-2

1.2.6 Warming Up..................................................................................................................1-2

1.2.7 Trademark Acknowledgments.......................................................................................1-2

2. Specifications........................................................................................................... 2-1

2.1 Product Overview ................................................................................................................2-1

2.2 Features...............................................................................................................................2-1

2.3 Specifications.......................................................................................................................2-4

2.3.1 Video Signal Formats and Corresponding Standards ...................................................2-4

2.3.2 Audio Playback.............................................................................................................2-4

2.3.3 Input/Output Connectors...............................................................................................2-5

2.3.4 Control Connectors.......................................................................................................2-6

2.3.5 LCD ..............................................................................................................................2-6

2.3.6 Display Modes .............................................................................................................. 2-6

2.3.7 Screen Capture.............................................................................................................2-7

2.3.8 Presets .........................................................................................................................2-7

2.3.9 Video Signal Waveform Display....................................................................................2-7

2.3.10 Vector Display...............................................................................................................2-8

2.3.11 5 Bar Display ................................................................................................................2-8

2.3.12 Phase Difference Display .............................................................................................2-9

2.3.13 Picture Display..............................................................................................................2-9

2.3.14 CINELITE Display.........................................................................................................2-9

2.3.15 CINEZONE Display ....................................................................................................2-10

2.3.16 Audio Display.............................................................................................................. 2-10

2.3.17 Status Display............................................................................................................. 2-10

2.3.18 View Finder Display ....................................................................................................2-12

2.3.19 Front Panel ................................................................................................................. 2-12

2.3.20 Rear Panel.................................................................................................................. 2-12

2.3.21 General Specifications ................................................................................................ 2-12

3. Component Names and Functions .......................................................................... 3-1

3.1 Front Panel ..........................................................................................................................3-1

3.2 Rear Panel...........................................................................................................................3-3

3.3 Top and Bottom Panels........................................................................................................3-4

4. Before You Begin Measuring ................................................................................... 4-1

4.1 Attaching the Ferrite Cores ..................................................................................................4-1

4.2 Preparing the Power Supply ................................................................................................4-2

4.2.1 Attaching the DC Power Cord....................................................................................... 4-2

4.2.2 Turning On the Power...................................................................................................4-2

4.2.3 Turning Off the Power...................................................................................................4-2

4.3 Applying SDI Input Signals ..................................................................................................4-3

4.4 Transmitting an SDI Output Signal.......................................................................................4-4

4.5 Applying a Composite Video Signal .....................................................................................4-4

4.6 Applying an External Sync Signal ........................................................................................4-5

4.7 Using a Tripod......................................................................................................................4-6

4.8 Using a VESA Stand............................................................................................................4-6

4.9 General Display Explanation................................................................................................4-7

4.10 Basic Menu Operations........................................................................................................4-9

5. System Settings....................................................................................................... 5-1

5.1 Setting the Input Format ......................................................................................................5-1

5.1.1 Setting the Input Format Detection Method ..................................................................5-1

5.1.2 Selecting i or PsF..........................................................................................................5-2

5.1.3 Setting the Input Format ...............................................................................................5-2

5.1.4 Setting the Composite Display Format .........................................................................5-3

5.2 Selecting the Monitor’s Color Temperature .......................................................................... 5-3

5.3 Display Settings ...................................................................................................................5-3

5.3.1 Displaying the Input Format..........................................................................................5-4

5.3.2 Selecting the Date Display Format ...............................................................................5-4

5.3.3 Selecting the Time Display Format ...............................................................................5-4

5.3.4 Displaying the Color System.........................................................................................5-5

5.3.5 Selecting the Timecode Display Format .......................................................................5-5

5.3.6 Setting the Backlight Brightness ...................................................................................5-5

5.3.7 Setting the Backlight Auto Shutoff Time........................................................................5-6

5.3.8 Displaying the Amount of Remaining Battery Power.....................................................5-6

5.4 Configuring the External Interface .......................................................................................5-7

5.4.1 Selecting the Method for Loading Presets ....................................................................5-7

5.4.2 Configuring Ethernet Settings.......................................................................................5-8

5.5 Setting the Date and Time ...................................................................................................5-9

5.6 Assigning a Function to the SHORT CUT Key.....................................................................5-9

5.7 Initialization ........................................................................................................................ 5-10

5.7.1 Initializing the Settings Using SETUP INIT .................................................................5-10

5.7.2 Initializing the Settings by Restarting the LV 5330 ...................................................... 5-10

6. Presets .................................................................................................................... 6-1

6.1 Registering Presets..............................................................................................................6-1

6.2 Loading Presets...................................................................................................................6-2

6.3 Deleting Presets...................................................................................................................6-3

6.4 Copying Presets...................................................................................................................6-3

6.5 Copying All Presets..............................................................................................................6-4

6.5.1 Copying Presets from USB Memory to the LV 5330 .....................................................6-4

6.5.2 Copying Presets from the LV 5330 to USB Memory .....................................................6-4

7. Screen Capture Feature .......................................................................................... 7-1

7.1 Taking a Screen Capture of the Display...............................................................................7-2

7.2 Displaying Screen Capture Data on the LV 5330.................................................................7-2

7.3 Saving Screen Capture Data to USB Memory .....................................................................7-3

7.4 Viewing Screen Capture Data from USB Memory ............................................................... 7-4

7.5 Deleting Screen Capture Data from USB Memory............................................................... 7-5

8. Picture Display......................................................................................................... 8-1

8.1 Picture Display Explanation .................................................................................................8-1

8.2 Setting the Brightness and Contrast ....................................................................................8-2

8.2.1 Adjusting the Brightness ............................................................................................... 8-2

8.2.2 Adjusting the Contrast ..................................................................................................8-2

8.3 Marker Settings....................................................................................................................8-2

8.3.1 Displaying an Aspect Marker ........................................................................................8-3

8.3.2 Displaying a Safe Action Marker...................................................................................8-3

8.3.3 Displaying a Safe Title Marker ......................................................................................8-4

8.3.4 Displaying a Center Marker .......................................................................................... 8-4

8.4 Line Selection Settings ........................................................................................................8-5

8.4.1 Displaying a Marker on the Selected Line ....................................................................8-5

8.4.2 Selecting a Line ............................................................................................................8-6

8.4.3 Setting the Line Selection Range .................................................................................8-6

8.5 Selecting the Picture Display Size .......................................................................................8-6

8.6 Switching between the Color and Monochrome Displays ....................................................8-7

8.7 Adjusting the Chroma Gain..................................................................................................8-8

8.8 Adjusting the Aperture..........................................................................................................8-8

9. CINELITE Display.................................................................................................... 9-1

9.1 Selecting the Points to Measure ..........................................................................................9-1

9.2 Moving the Cursors..............................................................................................................9-2

9.3 Selecting the Measurement Area......................................................................................... 9-3

9.4 Displaying Luminance Levels as f Stop Numbers ................................................................ 9-3

9.5 Displaying Luminance Levels as Percentages or RGB Values ............................................9-5

9.6 Configuring User-Defined Correction Tables........................................................................9-7

9.6.1 Creating User-Defined Correction Tables Using the LV 5330 ....................................... 9-7

9.6.2 Loading a User-Defined Correction Table into the LV 5330 ........................................ 9-10

10. CINEZONE Display ............................................................................................... 10-1

10.1 CINEZONE Display............................................................................................................ 10-1

10.1.1 Selecting the Color Gradation.....................................................................................10-2

10.1.2 Setting the Color Range .............................................................................................10-2

10.2 Level Search Display ......................................................................................................... 10-3

11. Video Signal Waveform Display............................................................................. 11-1

11.1 Video Signal Waveform Display Explanation ..................................................................... 11-1

11.2 Display Position Settings ................................................................................................... 11-2

11.2.1 Setting the Vertical Position ........................................................................................ 11-2

11.2.2 Setting the Horizontal Position.................................................................................... 11-2

11.3 Intensity Settings ............................................................................................................... 11-2

11.3.1 Setting the Video Signal Waveform Intensity .............................................................. 11-2

11.3.2 Setting the Scale Intensity .......................................................................................... 11-3

11.4 Gain and Filter Settings ..................................................................................................... 11-3

11.4.1 Selecting the Fixed Gain............................................................................................. 11-3

11.4.2 Setting the Variable Gain ............................................................................................ 11-4

11.4.3 Selecting a Filter ......................................................................................................... 11-4

11.5 Sweep Settings.................................................................................................................. 11-6

11.5.1 Selecting the Sweep Method ...................................................................................... 11-6

11.5.2 Selecting the Line Display Sweep Time...................................................................... 11-7

11.5.3 Selecting the Field or Frame Display Sweep Time ..................................................... 11-7

11.5.4 Selecting Which Field to Display................................................................................. 11-8

11.5.5 Selecting the Horizontal Magnification........................................................................ 11-8

11.6 Line Selection Settings ....................................................................................................11-10

11.6.1 Displaying the Waveform of the Selected Line ......................................................... 11-10

11.6.2 Selecting a Line ........................................................................................................ 11-10

11.6.3 Setting the Line Selection Range ............................................................................. 11-11

11.7 Cursor Settings ................................................................................................................ 11-11

11.7.1 Displaying Cursors.................................................................................................... 11-11

11.7.2 Selecting the Cursor Type ........................................................................................ 11-12

11.7.3 Moving the Cursors................................................................................................... 11-12

11.7.4 Setting the Units of Measurement............................................................................. 11-13

11.7.5 Setting the Base Value ............................................................................................. 11-13

11.8 Color System Settings ..................................................................................................... 11-14

11.8.1 Selecting the Display Format.................................................................................... 11-14

11.8.2 Displaying the GBR or RGB Signal Simultaneously with the Luminance Signal....... 11-15

11.8.3 Setting the Setup Level............................................................................................. 11-16

11.9 Scale Settings.................................................................................................................. 11-17

11.9.1 Selecting the Scale Unit............................................................................................ 11-17

11.9.2 Displaying a Scale for 75 % Color Bars .................................................................... 11-18

11.9.3 Changing the Scale Color......................................................................................... 11-18

11.10 Displaying the Blanking Interval....................................................................................... 11-19

11.11 Setting the Display Mode to TIMING................................................................................ 11-19

11.12 Switching the Display Mode............................................................................................. 11-20

11.13 Turning Y,CB,CR; GBR; and RGB Channels On and Off.................................................. 11-21

12. Vector Display........................................................................................................ 12-1

12.1 Vector Display Explanation ................................................................................................12-1

12.2 Vector and Scale Settings..................................................................................................12-2

12.2.1 Setting the Vector Intensity .........................................................................................12-2

12.2.2 Setting the Scale Intensity ..........................................................................................12-2

12.2.3 Displaying the I and Q Axes........................................................................................12-3

12.2.4 Changing the Scale Color...........................................................................................12-3

12.3 Gain Settings ..................................................................................................................... 12-4

12.3.1 Selecting the Fixed Gain.............................................................................................12-4

12.3.2 Setting the Variable Gain ............................................................................................12-4

12.4 Line Selection Settings ...................................................................................................... 12-5

12.4.1 Displaying the Vectors of the Selected Line................................................................ 12-5

12.4.2 Selecting a Line .......................................................................................................... 12-6

12.4.3 Setting the Line Selection Range ...............................................................................12-6

12.5 Color System Settings ....................................................................................................... 12-7

12.5.1 Selecting the Display Format......................................................................................12-7

12.5.2 Setting the Setup Level............................................................................................... 12-8

12.5.3 Displaying a Scale for 75 % Color Bars ......................................................................12-8

12.6 Switching between the Vector, 5 Bar, and Phase Difference Displays ............................... 12-9

12.6.1 5 Bar Display Explanation...........................................................................................12-9

12.6.2 Explanation of the Phase Difference Display............................................................12-10

12.7 Phase Difference Display Settings................................................................................... 12-12

12.7.1 Setting the Phase Difference Memory Number......................................................... 12-13

12.7.2 Recording the Current Phase Difference ..................................................................12-13

12.7.3 Deleting Recorded Phase Differences......................................................................12-13

12.7.4 Setting the Current Phase Difference to Zero...........................................................12-13

12.7.5 Initializing the Phase Difference Settings..................................................................12-13

13. Audio Display......................................................................................................... 13-1

13.1 Audio Display Explanation ................................................................................................. 13-1

13.2 Selecting the Display Mode ............................................................................................... 13-2

13.3 Selecting Which Channels to Measure ..............................................................................13-3

13.4 Channel Mapping Settings.................................................................................................13-4

13.5 Meter Settings.................................................................................................................... 13-5

13.5.1 Setting the Reference Level .......................................................................................13-5

13.5.2 Setting the Range .......................................................................................................13-5

13.5.3 Selecting the Scale .....................................................................................................13-6

13.5.4 Setting the Peak Value Hold Time .............................................................................. 13-6

13.5.5 Meter Settings Overview.............................................................................................13-7

13.6 Headphone Settings .......................................................................................................... 13-8

13.6.1 Turning Headphone Output On and Off ......................................................................13-8

13.6.2 Adjusting the Headphone Volume............................................................................... 13-8

13.6.3 Selecting the Headphone Jack Output Channels .......................................................13-9

14. Status Display........................................................................................................ 14-1

14.1 Status Display Explanation ................................................................................................14-1

14.2 Event Log Settings............................................................................................................. 14-4

14.2.1 Event Log Explanation................................................................................................14-4

14.2.2 Scrolling through the Event Log.................................................................................. 14-6

14.2.3 Starting Event Logging................................................................................................14-6

14.2.4 Deleting the Event Log ...............................................................................................14-6

14.2.5 Setting the Event Log Overwrite Mode ....................................................................... 14-7

14.2.6 Saving the Event Log to USB Memory .......................................................................14-7

14.2.7 Deleting Event Logs in USB Memory..........................................................................14-7

14.3 Data Dump Settings........................................................................................................... 14-8

14.3.1 Data Dump Explanation.............................................................................................. 14-8

14.3.2 Selecting the Data Dump Display Mode .....................................................................14-9

14.3.3 Selecting the Data Dump Display Format................................................................. 14-10

14.3.4 Selecting the Data Dump Display Start Position ....................................................... 14-11

14.3.5 Selecting Data Dump Lines and Samples ................................................................ 14-11

14.3.6 Saving a Data Dump to USB Memory ......................................................................14-12

14.3.7 Deleting Data Dumps in USB Memory......................................................................14-12

14.4 Audio Status Settings....................................................................................................... 14-13

14.4.1 Audio Status Display Explanation .............................................................................14-13

14.4.2 Selecting Which Channels to Display .......................................................................14-14

14.5 Ancillary Packet Settings .................................................................................................14-15

14.5.1 Explanation of the Ancillary Packet Display .............................................................. 14-15

14.5.2 EDH Packet Display Explanation..............................................................................14-17

14.5.3 Format ID Display Explanation .................................................................................14-19

14.5.4 Subtitle Packet Display Explanation .........................................................................14-21

14.5.5 Inter-Stationary Control Signal Display Explanation.................................................. 14-23

14.6 Error Settings................................................................................................................... 14-25

14.6.1 Selecting the Alarm Signal Polarity...........................................................................14-25

14.6.2 Selecting the Error Count Rate.................................................................................14-25

14.6.3 Configuring Error Detection Settings ........................................................................14-26

14.6.4 Setting Gamut Error Detection Levels ......................................................................14-30

14.6.5 Setting Composite Gamut Error Detection Levels ....................................................14-31

14.6.6 Selecting the Error Display Format ...........................................................................14-32

14.7 Resetting Errors............................................................................................................... 14-32

15. View Finder Display............................................................................................... 15-1

15.1 Adjusting the Brightness .................................................................................................... 15-1

15.2 Adjusting the Contrast........................................................................................................ 15-1

15.3 Adjusting the Chroma Gain................................................................................................15-2

15.4 Adjusting the Aperture........................................................................................................ 15-2

16. Multi-Screen Display Feature ................................................................................ 16-1

16.1 Selecting the Multi-Screen Display Format ........................................................................ 16-1

16.2 Setting Each Measurement Mode......................................................................................16-2

16.3 Selecting the Displayed Contents in 4 SCREEN Display Mode......................................... 16-3

17. External Interface .................................................................................................. 17-1

17.1 Remote Control Feature ....................................................................................................17-1

17.1.1 Remote Control Connector Specifications ..................................................................17-1

17.1.2 Loading Presets..........................................................................................................17-2

17.1.3 Transmitting Alarm Signals .........................................................................................17-2

17.1.4 Displaying a Tally Light ............................................................................................... 17-2

17.2 TELNET ............................................................................................................................. 17-3

17.2.1 Procedure ................................................................................................................... 17-3

17.2.2 How to Enter Commands............................................................................................17-4

17.2.3 TELNET Commands...................................................................................................17-4

17.3 FTP..................................................................................................................................17-10

17.3.1 Procedure ................................................................................................................. 17-10

17.3.2 How to Enter Commands..........................................................................................17-10

17.3.3 FTP Commands........................................................................................................ 17-11

17.4 SNMP .............................................................................................................................. 17-11

18. Calibration and Repairs ......................................................................................... 18-1

19. APPENDIX ............................................................................................................ 19-1

19.1 Menu Tree.......................................................................................................................... 19-1

19.1.1 Picture Menu .............................................................................................................. 19-1

19.1.2 CINELITE Menu..........................................................................................................19-2

19.1.3 CINEZONE Menu .......................................................................................................19-3

19.1.4 Video Signal Waveform Menu ....................................................................................19-3

19.1.5 Vector Menu ............................................................................................................... 19-6

19.1.6 Multi-Screen Display Menu (Audio Menu) ..................................................................19-7

19.1.7 Status Menu................................................................................................................ 19-8

19.1.8 View Finder Menu..................................................................................................... 19-11

19.1.9 Screen Capture Menu............................................................................................... 19-11

19.1.10 System Menu............................................................................................................19-12

19.1.11 Preset Registration Menu .........................................................................................559H19-14

279H19.1.12 Preset Menu .............................................................................................................560H19-15

280H19.2 About the Firmware Version............................................................................................. 561H19-15

Index

GENERAL SAFETY SUMMARY

■To Avoid Personal Injury

It is recommended that only qualified personnel with technical knowledge use this instrument

only after reading and fully understanding all functions of the instrument described this

instruction manual.

This instrument is not designed and manufactured for consumers.

If you do not have enough knowledge on electricity, to avoid personal injury and prevent

damage to this product, please be sure to use this product only under the supervision of an

engineer who has sufficient knowledge about electronics.

■Precautions on Contents

Should you find the contents in this manual and any of its technical terms confusing, please

feel free to contact your local LEADER agent.

■Symbols and Terms

Following terms and symbols indicate necessary warnings and cautions used in this manual

and on the product are there for safe operation.

＜Symbol＞

The sections where this symbol is marked in this manual or instrument, if

not correctly performed or practiced, could result in personal injury or

cause serious danger to the instrument.

Misuse could also produce unintentional movement to create an

operational impediment on the instrument or other products that might be

connected to it.

Be sure to refer to the safety precautions in this manual to safely use the

part of the instrument where the symbol is marked.

＜Term＞

WARNING

Warning statements identify warning conditions that if disregarded or not

correctly performed or adhered to, could result in serious personal injury

or even loss of life.

＜Term＞

CAUTION

Caution statements identify caution conditions that if disregarded or not

correctly performed or adhered to, could result in personal injury or

damage to the instrument.

GENERAL SAFETY SUMMARY

Review the following safety precautions to avoid operator’s injury and loss of life and prevent

damage and deterioration to this instrument. To avoid potential hazards, use this product as

specified.

■Warnings on the Cases and Panels of the Instrument

Operator should not remove any cases or panel for any reasons. If you touch inside the

instrument it could result personal shock or fire hazard. Refrain from spilling any liquid

on or inserting anything flammables or piece of metal into the ventilation of the instrument.

Such actions could cause fire, shock, malfunction and be an accident hazard while the

power is on.

■Warnings on Power Line

●This instrument works in the DC power supply, and uses an accessory AC adaptor.

There is danger of the product malfunction and a fire when things other than

specification are used.

■Warning on Installation Environments

●About the Operating Temperature Range

Operate the instrument between the temperature range of 0 to 40 °C. Operating the

instrument at higher temperatures could cause a fire hazard.

Rapid changes of temperatures from cold to warm can create internal moisture or

condensation and could damage the instrument. If there is a possibility of moisture

condensation allow the instrument to sit for 30 minutes without the power on.

●About the Operating Humidity Range

Operating humidity range is < 85 % RH. (without condensation)

Do not operate the instrument with wet hands, this could cause a shock and fire

hazard.

●About the Operation in the Presence of Gasses

Operating the instrument in and near the presence or storage locations of flammable,

explosive gasses or fumes could create an explosion and fire hazard. Do not operate

the instrument anywhere near such environments.

●Avoid Insertions

Do not insert metals or flammable objects or drop liquid on or into the instrument. To

do so could cause fire, shock, malfunction and create a dangerous accident hazard.

WARNING

Tabla de contenidos

Otros manuales de Monitor de Leader Electronics Corp.

Leader Electronics Corp.

Leader Electronics Corp. LV 58SER20 Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación