LawnMaster Eco Series Manual de usuario

Eco-Series Edger

Contents

Safety Instructions ....................................................... 4

Preparation.............................................................. 5

Operation ................................................................ 5

Commissioning the Edger .......................................... 6

Engine Information:................................................. 6

Oil: ............................................................................ 7

Fuel: .......................................................................... 8

Assembling the Edger ............................................. 9

Handle: ................................................................. 9

Attaching the Handle to the Edger ................. 11

Cutter Nut........................................................... 13

Belt Adjustment.................................................. 13

Operating the Edger ................................................ 15

Operator Controls ................................................. 15

Starting the Edger ................................................. 16

Engaging Cutter.................................................... 17

Adjusting Cutting Depth ....................................... 17

Adjusting Curb Height........................................... 18

Adjusting Cutter Angle ......................................... 18

Maintenance ............................................................ 19

Engine .................................................................... 19

Cutter ..................................................................... 19

Fasteners and Linkages ........................................ 19

Cleaning ................................................................ 19

Lubrication ............................................................. 20

Belt Change .......................................................... 21

Safety Instructions

Read the instructions carefully. Be familiar

with the controls and use of the equipment

before you begin.

Know how to stop the Edger and disengage

the controls quickly in an emergency.

The operator or user is responsible for

accidents or hazards occurring to other

people or property.

Safety

Never allow children or people unfamiliar

with these instructions to use the Edger.

Never operate the Edger while people or

animals are nearby.

While edging, always wear substantial

footwear and long trousers. Do not operate

the Edger when barefoot or wearing open

sandals.

Never operate the Edger with defective

guards, shields or without safety protection

devices in place and in good working order.

Do not operate the Edger in a confined

space where dangerous carbon monoxide

fumes can collect.

Never operate the Edger backwards.

Always wear suitable eye and ear protection

when operating the Edger.

Use the Edger in daylight hours or in very

good artificial light.

Never lift or carry the Edger while the engine

is running.

Keep hands and feet well clear of rotating

blades and moving components

Always stop the engine when you leave the

Edger unattended and when crossing roads,

pathways or gravel drives.

Preparation

Thoroughly inspect the area where the Edger

is to be used and remove all stones, sticks,

wires and any other foreign objects.

Operation

Check that the Edger is in good working

order before using.

Do not adjust or modify the engine governor

or throttle settings as this will have a

detrimental effect on the Edger

performance and ultimately shorten the

Edger’s working life.

Visually inspect the Edger to ensure that all

parts are not worn or damaged.

Perform all the listed maintenance regularly.

Replace worn or damaged parts with

genuine spare parts only.

Commissioning the Edger

Open the carton and inspect the contents, you will

find

1x Edger

1x Edger Handle Assembly

1x Owner’s Manual

1x Engine Manual

1x Warranty Card

Take precautions when removing the Edger from

the carton to ensure that you do not put undue

stress upon your back when lifting. It is

recommended that two people lift out the edger to

prevent injury or if available, use a hoist.

Engine Information:

Refer to the separate Engine Manufacturers

Owner’s Manual Supplied with the Edger and carry

out all of the safety checks contained before

proceeding with the commissioning of the Edger.

Oil:

1. Place the Edger on a level surface.

2. Remove the oil dipstick.

3. Wipe the dipstick clean.

4. Fill to the full mark indicated, pouring slowly –

DO NOT OVERFILL.

5. Check the level by inserting

the dipstick back into the

engine without tightening.

6. Once full, screw the dipstick

securely back into place.

Note that if the engine is overfilled,

it will smoke excessively or appear

to be seized.

Caution

Engines are shipped without oil. Check the

engine manufacturers’ manual for oil grade

and quantity details.

Figure 1 Oil Dipstick

Fuel:

Your engine will run best of fresh, clean unleaded

petrol (91 octane). Do not over fill the petrol tank, it

is recommended that approximately 5 to 10mm of

tank space is left for fuel expansion.

When handling fuel:

Do not fill tank when the engine is running.

Do not smoke or expose to naked flame.

Do fill tank in an open well-ventilated area.

Do wipe away any spills.

Do move the mower away from any petrol

fumes before starting engine.

Caution

Petrol vapour is highly flammable. Handle

with extreme care. Store in approved

containers.

Assembling the Edger

Handle:

The handle is supplied in two pieces for shipping,

the main handle labelled (2) and the height\tilt

lever (4)

Unscrew the black knob (1) from height\tilt

lever (4).

Remove lever guide (3) from handle (2) by

undoing bolts (5).

Insert lever (4) upwards through the slot in

handle (2).

Figure 2 - Handle Assembly

Tabla de contenidos

Manuales populares de Arista de otras marcas

Ryobi

Ryobi EXPAND-IT RYEDG12VNM Manual de usuario

VEVOR

VEVOR ASYTM02230 Manual de usuario

CRL

CRL SM5C Manual de usuario

Ryobi

Ryobi RED1220 Manual de usuario

Kunzle & Tasin

Kunzle & Tasin SILVER BACK Manual

Scotts

Scotts S20300 Manual de usuario

Husqvarna

Husqvarna LE475 Manual de usuario

Echo

Echo PE-230 Manual de usuario

Mantis

Mantis Edger Manual de usuario

Echo

Echo PE-225 Manual de usuario

MTD

MTD 520 Series Manual de usuario

RedMax

RedMax HEZ2602S Manual de usuario

Craftsman

Craftsman 247.772461 Manual de usuario

Ryobi

Ryobi RED1850Li40 Manual de usuario

Clarke

Clarke Super E Manual de usuario

MTD

MTD 244-595-000 Manual de usuario

Husqvarna

Husqvarna 426EX Manual de usuario

MTD

MTD 24596B Manual de usuario