LARTET DN-107P Manual de usuario
1227K13D
OPERATION MANUAL
FOR DISPLAY
DN-107P
Index
1. INTRODUCTION....................................................................................................................... 1
2. GENERAL CHARACTERISTICS.............................................................................................. 1
2.1. Electrical characteristics .....................................................................................................1
2.1.1. Electrical characteristics of the DN-107/P displays. ....................................................1
2.2. Dimensions and fixing of the displays ................................................................................2
2.2.1. Dimensions of the displays DN-107/3..........................................................................2
2.2.2. Dimensions of the displays DN-107/4..........................................................................2
2.2.3. Fixing of the displays....................................................................................................3
3. INSTALLATION......................................................................................................................... 1
3.1. Power supply ...................................................................................................................... 1
3.2. Wiring inputs.......................................................................................................................2
4. OPERATION.............................................................................................................................. 1
4.1. Initial reset........................................................................................................................... 1
4.2. Programming parameters...................................................................................................1
4.2.1. Enter to modify parameters..........................................................................................1
4.2.2. Exit modify parameters ................................................................................................1
4.2.3. Common parameters ................................................................................................... 2
4.2.4. Parameters of the function 03 (Counter)......................................................................2
4.2.5. Parameters of function 04 (Chronometer). ..................................................................4
4.2.6. Parameters of functions 05, 15 and 25 (Tachymeter). ................................................6
4.2.7. Parameters of function 06 (Binary) ..............................................................................7
4.2.8. Parameters of function 07 (Digit by digit)..................................................................... 7
4.3. Functions ............................................................................................................................ 8
4.3.1. Function 1. 8 bits multiplexed BCD.............................................................................. 8
4.3.2. Function 11. 8 bits multiplexed BCD............................................................................9
4.3.3. Function 2. Direct BCD. .............................................................................................10
4.3.4. Function 12. Direct BCD. ...........................................................................................10
4.3.5. Function 3. Counter....................................................................................................11
4.3.6. Function 4. Chronometer ...........................................................................................12
4.3.7. Function 5. Tachometer.............................................................................................13
4.3.8. Function 15. Tachometer with the less significant digit = 0. ...................................... 15
4.3.9. Function 25. Tachometer with the 2 less significant digit = 0. ...................................15
4.3.10. Function 6. Binary.................................................................................................... 15
4.3.11. Parameter 7. Digit by digit........................................................................................15
4.4. Colour configuration.......................................................................................................... 16
4.4.1. Using functions BCD, tachometer. binary or digit by digit.......................................... 16
4.4.2. Using functions counter or chronometer....................................................................17
4.4.3. Parameters to define the colour.................................................................................18
4.4.4. Work with only one colour..........................................................................................19
CHAPTER 1
INTRODUCTION
1-1
DN-107P displays series
1. INTRODUCTION
The family of numeric displays DN-107P has been designed to provide, in a single
display, the following functions:
Direct BCD. Only for 3 digits displays, with 12 inputs you may codify 3 digits.
Two more inputs lest you to codify the dot position.
Multiplexed BCD. For displays up to 4 digits. With 8 inputs you may codify all 4
digits values and their dots.
Counter. For displays up to 4 digits. Inputs for preset, reset, increase and
decrease. Input with fast and low speed selectable. Back-up for display value if no
power supply.
Tachometer. For displays of 3 or 4 digits. The display value is proportional to
the input frequency. Totally configurable.
Chronometer. For displays of 3 or 4 digits. It lets you configure a chronometer
with hours:minutes or minutes:seconds running in increment or decrement. The display
has inputs for preset, reset and input for run/stop.
Binary. For displays up to 4 digits. Displays the decimal value of binary codes
represented by the 14 inputs. Maximum value: 9999.
The size of digits of DN-107P is 57mm. The viewing distance from 30m to 120m, is one
of the most interesting characteristics.
CAPÍTULO 2 CARACTERÍSTICAS GENERALES 2-1
DN-107P displays series
2. GENERAL CHARACTERISTICS.
2.1. Electrical characteristics
2.1.1. Electrical characteristics of the DN-107/P displays.
Supply Voltage......................................88 to 264 VAC 47 to 63Hz.(Optional 24V)
Consumption ........................................35VA.
Display...................................................7 segments, 57mm high + decimal point.
................................................................Red led colour. Viewing distance: max 30 meters.
Parameter memory...............................Eeprom.
Control inputs .......................................12 to 24VCC. PNP NPN or Contact.
Relay option (R)....................................Contact SPDT. Maximum 48V 1A
Environmental Conditions...................Operation Temperature: -20 to 60ºC.
................................................................Storage Temperature: -30ºC to 70ºC.
................................................................Humidity: 5-95% RH non condensing.
................................................................Maximum environmental illumination: 1000 lux.
................................................................Sealing: IP41.
2-2 CARACTERÍSTICAS GENERALES CAPÍTULO 2
Display series DN-107P
2.2. Dimensions and fixing of the displays
2.2.1. Dimensions of the displays DN-107/3
245
120
70
40
All the measurements are in millimeters
2.2.2. Dimensions of the displays DN-107/4
245
120
70
40
All the measurements are in millimeters
CAPÍTULO 2 CARACTERÍSTICAS GENERALES 2-3
DN-107P displays series
2.2.3. Fixing of the displays
100
150/400/600
90 º
73,5
7
15
52
52
All the measurements are in millimeters
Fixing plate
M8
Tabla de contenidos
Otros manuales de Monitor de LARTET
