
Getting started
Remove the PureVis™ Wand from the LARQ Pitcher PureVis™. Give your LARQ
Pitcher PureVis™ a good wash before use.
Wake up your LARQ Pitcher PureVis™ by simply charging the PureVis™ Wand.
Connect the magnetic charger to the gold charging pins on top of the
PureVis™ Wand. We recommend a full charge to kick things off right.
Remove the filter from its packaging and soak the filter in water for 10
minutes before first use.
Install the filter into the reservoir and put the filter lid on. The lid should snap
into place. Fill up the reservoir with tap water. Pour out the first batch.*
The PureVis™ Mode will automatically activate after the LARQ Pitcher PureVis™
is completely filled. A blue breathing light indicates that the LARQ Pitcher
PureVis™ is on as water is filtered through. A 30-second PureVis™ cycle can
also be manually activated by pressing the Λbutton.
Pour yourself a glass of water and enjoy pure water beyond filtration!
1
06 English
*Note: you may notice some black carbon dust in the water on your first use or after a prolonged
period of not using the LARQ Pitcher PureVis™. This is harmless carbon from our plant-based filter
media. If desired, simply run a batch through the filter and pour out.
2
3
4
5
6