Lanner NCA-5210 Manual de usuario

NCA-5210

User Manual

Version: 1.7

Date of Release:2021-09-16

Network Appliance

Platform

This manual describes the overview of the various functionalities of this product and the information you

need to get it ready for operation. It is intended for those who are:

-responsible for installing, administering and troubleshooting this system or information technology

professionals.

-assumed to be qualified in the servicing of computer equipment, such as professional system integrators,

or service personnel and technicians.

The latest version of this document can be found on Lanner’s official website, available either

through the product page or through the Lanner Download Center page with a login account and

password.

This document utilizes different font types and icons in order to make selected text more transparent and

explicable to users. This document contains the following conventions:

Example

Convention

Usage

iptables –F

Monospace, shaded

A command to be entered at a shell

command-line

Setup page

Bold

A title of a dialog box or a page

<Enter>

Between a pair of inequality signs

A physical keyboard button

“Menu”

Between a pair of quotation marks

A menu option or a software button to be

clicked

Readme.txt

In Italic

A filename or a file path

IPMI User Guide

Underlined

The name of another document or a chapter

in this document

Icon

Usage

This mark indicates that there is something you should pay special

attention to while using the product.

This mark indicates that there is a caution or warning and it is

something that could damage your property or product.

Note or Information

Warning or Important

To obtain additional documentation resources and software updates for your system, please visit the Lanner

Download Center. As certain categories of documents are only available to users who are logged in, please

be registered for a Lanner Account at http://www.lannerinc.com/ to access published documents and

downloadable resources.

For troubleshooting the issues with your system, please visit the Lanner Q&A page for diagnostic

procedures and troubleshooting steps.

In addition to contacting your distributor or sales representative, you could submit a request to our Lanner

Technical Support at http://www.lannerinc.com/technical-support where you can fill in a support ticket to

our technical support department.

manufacturer reserves the right to make improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means

without the prior written permission of the original manufacturer.

Information provided in this manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third parties

that may result from such use.

Your feedback is valuable to us, as it will help us continue to provide you with more accurate and relevant

documentation. To provide any feedback, comments or to report an error, please email to

[email protected]m. Thank you for your time.

Lanner Electronics Inc.

7F, No.173, Sec.2, Datong Rd. Xizhi District,

New Taipei City 22184, Taiwan

立端科技股份有限公司

221 新北市汐止區

大同路二段 173 號7樓

T: +886-2-8692-6060

F: +886-2-8692-6101

E: [email protected]m

Beijing L&S Lancom Platform Tech. Co., Ltd.

Guodong LOFT 9 Layer No. 9 Huinan Road,

Huilongguan Town, Changping District,

Beijing 102208 China

T: +86 010-82795600

F: +86 010-62963250

E: service@ls-china.com.cn

Lanner Electronics Inc.

47790 Westinghouse Drive

Fremont, CA 94539

T: +1-855-852-6637

F: +1-510-979-0689

E: sales_us@lannerinc.com

Lanner Electronics Canada Ltd.

3160A Orlando Drive

Mississauga, ON

L4V 1R5 Canada

T: +1 877-813-2132

F: +1 905-362-2369

E: sales_ca@lannerinc.com

Intel® and Intel® Atom® are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other

countries.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note

1. An unshielded-type power cord is required in order to meet FCC emission limits and also to prevent interference

to the nearby radio and television reception. It is essential that only the supplied power cord be used.

2. Use only shielded cables to connect I/O devices to this equipment.

3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

Important

1. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

2. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

Follow these guidelines to ensure general safety:

Keep the chassis area clear and dust-free during and after installation.

Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and

roll up your sleeves.

Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.

Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

Disconnect all power by turning off the power and unplugging the power cord before installing or

removing a chassis or working near power supplies

Do not work alone if potentially hazardous conditions exist.

Never assume that power is disconnected from a circuit; always check the circuit.

Suivez ces consignes pour assurer la sécurité générale :

Laissez la zone du châssis propre et sans poussière pendant et après l’installation.

Ne portez pas de vêtements amples ou de bijoux qui pourraient être pris dans le châssis. Attachez votre

cravate ou écharpe et remontez vos manches.

Portez des lunettes de sécurité pour protéger vos yeux.

N’effectuez aucune action qui pourrait créer un danger pour d’autres ou rendre l’équipement dangereux.

Coupez complètement l’alimentation en éteignant l’alimentation et en débranchant le cordon

d’alimentation avant d’installer ou de retirer un châssis ou de travailler à proximité de sources

d’alimentation.

Ne travaillez pas seul si des conditions dangereuses sont présentes.

Ne considérez jamais que l’alimentation est coupée d’un circuit, vérifiez toujours le circuit. Cet appareil

génère, utilise et émet une énergie radiofréquence et, s’il n’est pas installé et utilisé conformément aux

instructions des fournisseurs de composants sans fil, il risque de provoquer des interférences dans les

communications radio.

There is risk of explosion if the battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Installation should be conducted only by a trained electrician or only by an electrically trained person

who knows all installation procedures and device specifications which are to be applied.

Do not carry the handle of power supplies when moving to another place.

Please conform to your local laws and regulations regarding safe disposal of lithium battery.

Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in

an explosion.

Leaving a battery in an extremely high temperature environment can result in an explosion or the leakage

of flammable liquid or gas.

A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable

liquid or gas.

Risque d’explosion si la pile est remplacée par une autre d’un mauvais type.

Jetez les piles usagées conformément aux instructions.

L’installation doit être effectuée par un électricien formé ou une personne formée à l’électricité

connaissant toutes les spécifications d’installation et d’appareil du produit.

Ne transportez pas l’unité en la tenant par le câble d’alimentation lorsque vous déplacez l’appareil.

Electrical equipment generates heat. Ambient air temperature may not be adequate to cool equipment

to acceptable operating temperatures without adequate circulation. Be sure that the room in which you

choose to operate your system has adequate air circulation.

Ensure that the chassis cover is secure. The chassis design allows cooling air to circulate effectively. An

open chassis permits air leaks, which may interrupt and redirect the flow of cooling air from internal

components.

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs

when electronic components are improperly handled and can result in complete or intermittent failures.

Be sure to follow ESD-prevention procedures when removing and replacing components to avoid these

problems.

Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. If no wrist strap is available,

ground yourself by touching the metal part of the chassis.

Periodically check the resistance value of the antistatic strap, which should be between 1 and 10

megohms (Mohms).

L’équipement électrique génère de la chaleur. La température ambiante peut ne pas être adéquate pour

refroidir l’équipement à une température de fonctionnement acceptable sans circulation adaptée.

Vérifiez que votre site propose une circulation d’air adéquate.

Vérifiez que le couvercle du châssis est bien fixé. La conception du châssis permet à l’air de

refroidissement de bien circuler. Un châssis ouvert laisse l’air s’échapper, ce qui peut interrompre et

rediriger le flux d’air frais destiné aux composants internes.

Les décharges électrostatiques (ESD) peuvent endommager l’équipement et gêner les circuits électriques.

Des dégâts d’ESD surviennent lorsque des composants électroniques sont mal manipulés et peuvent

causer des pannes totales ou intermittentes. Suivez les procédures de prévention d’ESD lors du retrait et

du remplacement de composants.

Portez un bracelet anti-ESD et veillez à ce qu’il soit bien au contact de la peau. Si aucun bracelet n’est

disponible, reliez votre corps àla terre en touchant la partie métallique du châssis.

Vérifiez régulièrement la valeur de résistance du bracelet antistatique, qui doit être comprise entre 1 et

10 mégohms (Mohms).

Mounting Installation Precautions

The following should be put into consideration for rack-mount or similar mounting installations:

Do not install and/or operate this unit in any place that flammable objects are stored or used in.

The installation of this product must be performed by trained specialists; otherwise, a non-specialist

might create the risk of the system’s falling to the ground or other damages.

Lanner Electronics Inc. shall not be held liable for any losses resulting from insufficient strength for

supporting the system or use of inappropriate installation components.

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient

temperature of the rack environment may be greater than room ambient. Therefore, consideration

should be given to installing the equipment in an environment compatible with the maximum ambient

temperature (Tma) specified by the manufacturer.

Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of airflow

required for safe operation of the equipment is not compromised.

Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition

is not achieved due to uneven mechanical loading.

Circuit Overloading - Consideration should be given to the connection of the equipment to the supply

circuit and the effect that overloading of the circuits might have on overcurrent protection and supply

wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this

concern.

Reliable Grounding - Reliable grounding of rack-mounted equipment should be maintained. Particular

attention should be given to supply connections other than direct connections to the branch circuit (e.g.,

use of power strips).

Before turning on the device, ground the grounding cable of the equipment. Proper grounding (grounding)

is very important to protect the equipment against the harmful effects of external noise and to reduce the

risk of electrocution in the event of a lightning strike. To uninstall the equipment, disconnect the ground

wire after turning off the power. A ground wire is required and the part connecting the conductor must be

greater than 4 mm2 or 10 AWG.

Avant d’allumer l’appareil, reliez le câble de mise à la terre de l’équipement à la terre.

Une bonne mise à la terre (connexion à la terre) est très importante pour protéger l’équipement contre

les effets néfastes du bruit externe et réduire les risques d’électrocution en cas de foudre.

Pour désinstaller l’équipement, débranchez le câble de mise à la terre après avoir éteint l’appareil.

Un câble de mise à la terre est requis et la zone reliant les sections du conducteur doit faire plus de 4

mm2 ou 10 AWG.

Loosen the screw of the earthing point.

Connect the grounding cable to the ground.

The protection device for the DC power source must provide 30

A current.

This protection device must be connected to the power source

before DC power.

Desserrez la vis du terminal de mise àla terre.

Branchez le câble de mise à la terre à la terre.

L’appareil de protection pour la source d’alimentation CC

doit fournir 30 A de courant.

Cet appareil de protection doit être branché à la source

d’alimentation avant l’alimentation CC.

This equipment must be grounded. The power cord for product should be connected to a socket-outlet

with earthing connection.

Cet équipement doit être mis à la terre. La fiche d'alimentation doit être connectée à une prise de terre

correctement câblée

Suitable for installation in Information Technology Rooms in accordance with Article 645 of the National

Electrical Code and NFPA 75.

Peut être installédans des salles de matériel de traitement de l'information conformément àl'article 645

du National Electrical Code et àla NFPA 75.

The machine can only be used in a restricted access location and has installation instructions by a skilled

person (for Fan side).

Les matériels sont destinés à être installés dans des EMPLACEMENTS À ACCÈS RESTREINT.

Instruction for the installation of the conductor to building earth by a skilled person.

This product is intended to be used with a UL Listed Optical Transceiver product. Laser Class 1

Tabla de contenidos

Otros manuales de Hardware de red de Lanner

Lanner

Lanner NCA-2523 Manual de usuario

Lanner

Lanner ECA-4025 Manual de usuario

Lanner

Lanner ECA-4027 Manual de usuario

Lanner

Lanner uCPE NCA-4020 Manual de usuario

Lanner

Lanner NCA-6530 Manual de usuario

Lanner

Lanner NCA-2512 Manual de usuario

Lanner

Lanner IIOT-I530 Manual de usuario

Lanner

Lanner NCA-1525 Manual de usuario

Lanner

Lanner NCA-4025 Manual de usuario

Lanner

Lanner NCS2-VT04 Manual de usuario

Lanner

Lanner NCR-1510 Manual de usuario

Lanner

Lanner HCP-72i1 Manual de usuario

Lanner

Lanner FW-7580 Manual de usuario

Lanner

Lanner R6S Manual de usuario

Lanner

Lanner IIOT-I531 Manual de usuario

Lanner

Lanner ICS-P570 Manual de usuario

Lanner

Lanner NCA-1040SE Manual de usuario

Lanner

Lanner HTCA-6400 Manual de usuario

Lanner

Lanner LEC-3340 Manual de usuario

Lanner

Lanner FX-3420 Manual de usuario

Lanner

Lanner LWR-X8460 Manual de usuario

Lanner

Lanner NCA-2510 Manual de usuario

Lanner

Lanner NCA-2522 Manual de usuario

Lanner

Lanner NCA-4220 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario

Cantek

Cantek NR310-4 Manual de usuario