OPERATING AND PROGRAMMING INSTRUCTIONS
Keypad Digital Combination Lock Range:- 378---
FUNCTION
MODE
KEY SEQUENCE NOTES
MASTER CODE FUNCTIONS - FOR STEPS 1-3 PLEASE ENTER THE RELEVANT NUMBERS IN THE SEQUENCE SHOWN BELOW (EG. STEP1STEP2STEP3)
STEP 1 STEP 2 STEP 3
CHANGE MASTER CODE ✓ ✓ [logo] [Old Master Code] 01 [New Master Code] [New Master Code] MASTER CODE IS EIGHT DIGITS
CHANGE USER CODE ✓[logo] [Master Code] 02 [New User Code] USER CODE IS FOUR DIGITS
DELETE USER CODE ✓[Master Code] OPENS LOCK AND DELETES USER CODE
SET / CHANGE SUB-MASTER CODE ✓ ✓ [logo] [Master Code] 03 [New Sub-Master Code] SUB-MASTER CODE IS SIX DIGITS
DELETE SUB-MASTER CODE ✓ ✓ [logo] [Master Code] 07 DELETES SUB-MASTER CODE
OPEN LOCK ✓ ✓ [Master Code] DELETES USER CODE IN PUBLIC MODE
CLOSE LOCK AUTO RE-LOCKS AUTOMATICALLY AFTER 4 SECONDS
SET PUBLIC MODE ✓[logo] [Master Code] 08 DELETES ALL EXISTING USER CODES
SET PRIVATE MODE ✓[logo] [Master Code] 09 [New User Code] DELETES ALL EXISTING USER CODES
SET TECHNICIAN MODE ✓[logo] [Master Code] 10 [New Technician Code] TECHNICIAN CODE IS SIX DIGITS
REMOVE TECHNICIAN MODE ✓[logo] [Master Code] 11 DELETES TECHNICIAN CODE
SET AUDIBLE BUTTONS ON ✓ ✓ [logo] [Master Code] 12 UNIT WILL BEEP ON EACH BUTTON PRESS
SET AUDIBLE BUTTONS OFF ✓ ✓ [logo] [Master Code] 13 UNIT WILL OPERATE SILENTLY
SET ALARM MODE ON & SET TIME ✓[logo] [Master Code] 14 [Time Code] SWITCHED VERSION ONLY. SEE NOTES ON TIMERS BELOW
SET ALARM MODE OFF ✓[logo] [Master Code] 15 SWITCHED VERSION ONLY
SET AUTO-TIMED UNLOCK ON & SET TIME ✓[logo] [Master Code] 16 [Time Code] SEE NOTES ON TIMERS BELOW
SET AUTO-TIMED UNLOCK OFF ✓[logo] [Master Code] 17 UNIT WILL NO LONGER OPEN AUTOMATICALLY
SET COIN LOCK MODE ON ✓[logo] [Master Code] 18 SWITCHED VERSION ONLY
SET COIN LOCK MODE OFF ✓[logo] [Master Code] 19 SWITCHED VERSION ONLY
SET AUTO-TIMED CODE CANCEL ON & SET TIME ✓[logo] [Master Code] 26 [Time Code] DISABLES USER CODE AFTER SET TIME - SEE NOTES ON TIMERS
SET AUTO-TIMED CODE CANCEL OFF ✓[logo] [Master Code] 27 UNIT WILL NO LONGER CANCEL USER CODE
SUB-MASTER CODE FUNCTIONS - PLEASE ENTER THE RELEVANT NUMBERS IN THE SEQUENCE SHOWN BELOW (EG. STEP1STEP2STEP3)
CHANGE USER CODE ✓[logo] [Sub-Master Code] 02 [New User Code] USER CODE IS FOUR DIGITS
CHANGE SUB MASTER CODE ✓ ✓ [logo] [Sub-Master Code] 03 [New Sub-Master Code] SUB-MASTER CODE IS SIX DIGITS
DELETE USER CODE ✓[Sub-Master Code] OPENS LOCK AND DELETES USER CODE
OPEN LOCK ✓ ✓ [Sub-Master Code] DELETES USER CODE IN PUBLIC MODE
CLOSE LOCK AUTO RE-LOCKS AUTOMATICALLY AFTER 4 SECONDS
USER CODE FUNCTIONS - PLEASE ENTER THE RELEVANT NUMBERS IN THE SEQUENCE SHOWN BELOW (EG. STEP1STEP2STEP3)
CHANGE USER CODE ✓[logo] [Old User Code] 02 [New User Code] [New User Code] USER CODE IS FOUR DIGITS
OPEN LOCK ✓ ✓ [User Code]
CLOSE LOCK ✓[User Code] WHEN SINGLE USER CODE ENTRY MODE IS SET
CLOSE LOCK ✓[User Code] [User Code] WHEN DOUBLE USER CODE ENTRY MODE IS SET
CLOSE LOCK AUTO RE-LOCKS AUTOMATICALLY AFTER 4 SECONDS
TECHNICIAN CODE FUNCTIONS
OPEN LOCK ✓[Technician Code] DOES NOT DELETE USER CODE
CLOSE LOCK AUTO RE-LOCKS AUTOMATICALLY AFTER 4 SECONDS
FUNCTIONS AVAILABLE TO ALL CODES
BATTERY CHECK ✓ ✓ [logo] [logo] REPLACE BATTERIES IF RED LIGHT SHOWS
NOTES TIMER FUNCTIONS TIME CODE EXAMPLES BATTERY CONDITION INDICATOR
ALL ACCEPTABLE BUTTON PRESSES ARE SIGNIFIED
BY A GREEN LIGHT.
TIME CODE 001 1 MIN FOUR GREEN LIGHTS - EXCELLENT
TIME CODE 010 10 MINS THREE GREEN LIGHTS - VERY GOOD
INCOMPLETE FUNCTIONS "TIME-OUT" AFTER 4
SECONDS.
TIME CODE 030 1/2 HR TWO GREEN LIGHTS - GOOD
TIME CODE 060 1 HR ONE GREEN LIGHT - LOW
ERRORS AND "TIME-OUTS" ARE SIGNIFIED BY
FLASHING RED LIGHT.
TIME CODE 480 8 HRS RED LIGHT –
CHANGE BATTERIES AS SOON AS POSSIBLE
TIME CODE 720 12 HRS
FOLLOWING AN ERROR OR "TIME-OUT", UNIT
REVERTS TO PREVIOUS SETTINGS.
TIME CODE 999 16 HRS 39 MINS ( MAXIMUM )
FLASHING RED LIGHT PRIOR TO LOCK OR
UNLOCK INDICATES LOW BATTERY VOLTAGE. CHANGE
BATTERIES AS SOON AS POSSIBLE.
TIME CODES ARE 3-DIGIT CODES CORRESPONDING
TO THE NUMBER OF MINUTES.
ALL TIMES ARE APPROXIMATE +/- 10%
MASTER CODE (8 digits) SUB MASTER CODE (6 digits) (No Default) USER CODE (4 DIGITS)
ENSURE THAT YOU CHANGE THE DEFAULT MASTER CODE TO YOUR OWN MASTER CODE AND KEEP A SAFE RECORD - IT IS NOT POSSIBLE TO PROGRAM THE LOCK WITHOUT IT
PRIVATE
PUBLIC
Lowe & Fletcher Ltd
Moorcroft Drive
Wednesbury, West Midlands
WS10 7DE, England
T: + 44 (0) 121 505 0400
F: + 44 (0) 121 505 0420
E:sales@lowe-and-etcher.co.uk
W: www.lowe-and-etcher.co.uk
9224215 Ver 2 3780 Programming Instructions April 2016
